10/08/2026
5 vị trí bắt buộc phải chống thấm khi xây nhà
Nhiều người chỉ nghĩ đến chống thấm khi tường đã ẩm, trần đã dột. Nhưng thực tế, chống thấm hiệu quả nhất là ngay từ khi thi công
Đừng bỏ qua 5 vị trí quan trọng dưới đây:
1. Sân thượng
Là nơi chịu nắng mưa trực tiếp quanh năm, nếu không chống thấm kỹ rất dễ gây dột trần và thấm xuống các tầng dưới
2. Nhà vệ sinh
Thường xuyên tiếp xúc với nước. Chỉ một lỗi nhỏ trong khâu chống thấm cũng có thể gây thấm sang phòng bên cạnh hoặc tầng dưới
3. Ban công
Nước mưa dễ đọng tại các góc, chân tường và khu vực thoát nước, lâu ngày gây nứt, b**g tróc lớp hoàn thiện
4. Tường ngoài
Mưa tạt kết hợp với các vết nứt nhỏ sẽ khiến nước thấm vào bên trong, gây ẩm mốc, b**g sơn và ảnh hưởng tuổi thọ công trình
5. Bể nước, tầng hầm
Đây là những khu vực thường xuyên tiếp xúc với nước hoặc áp lực nước lớn, cần sử dụng giải pháp chống thấm phù hợp để đảm bảo độ bền lâu dài
Dưới đây là một số giải pháp chống thấm gia dụng phổ biến mà khách hàng nhà ở thường quan tâm:
- Giải pháp chống thấm sân thượng
Sử dụng màng chống thấm hoặc vật liệu gốc PU/gốc xi măng để tạo lớp bảo vệ bền vững, ngăn nước mưa thấm xuống trần và các tầng bên dưới
- Giải pháp chống thấm nhà vệ sinh
Sử dụng Conmik W 112 vữa chống thấm gốc xi măng trước khi ốp lát, kết hợp xử lý kỹ cổ ống và chân tường để hạn chế rò rỉ nước trong quá trình sử dụng
- Giải pháp chống thấm tường ngoài
Xử lý các vết nứt, sau đó thi công sơn hoặc hóa chất chống thấm giúp ngăn nước mưa thẩm thấu, bảo vệ lớp sơn và kết cấu tường
- Giải pháp chống thấm ban công
Sử dụng Conmik Membrane có khả năng thẩm thấu hút nước cao. Chống thấm toàn bộ bề mặt sàn và các vị trí tiếp giáp với tường, đồng thời đảm bảo độ dốc thoát nước để tránh đọng nước lâu ngày
- Giải pháp xử lý vết nứt bê tông (CONMIK PU)
Conmik PU dạng lỏng sẽ đóng rắn nhờ phản ứng với hơi ẩm trong không khí. Bơm keo hoặc trám kín các vết nứt bằng vật liệu chuyên dụng trước khi chống thấm, giúp ngăn nước xâm nhập và kéo dài tuổi thọ công trình
Chống thấm không phải là chi phí phát sinh, mà là khoản đầu tư giúp bảo vệ công trình trong nhiều năm. Làm đúng ngay từ đầu sẽ tiết kiệm rất nhiều chi phí sửa chữa về sau
🏭 CONMIK – ĐỒNG HÀNH CÙNG CÁC CÔNG TRÌNH CÔNG NGHIỆP VIỆT NAM
Với hơn 20 năm kinh nghiệm, hệ thống 150+ đại lý trên toàn quốc cùng nhà máy sản xuất hiện đại quy mô hơn 10.000m², CONMIK không chỉ cung cấp vật liệu mà còn mang đến các giải pháp chống thấm và bảo vệ công trình toàn diện.
Hãy liên hệ CONMIK để được đội ngũ kỹ thuật tư vấn giải pháp phù hợp và tối ưu chi phí đầu tư.
-----------------------------------
Chống thấm phải là CONMIK!
Hotline: 024.3259.5539
Website: https://conmik.com/
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
5 Areas That Must Be Waterproofed When Building a House
Many homeowners only think about waterproofing after damp walls or leaking ceilings appear. However, the most effective waterproofing is done during construction, before problems arise.
Don't overlook these five critical areas:
1. Rooftop / Roof Terrace
The rooftop is exposed to sun and rain all year round. Without proper waterproofing, rainwater can easily seep through the slab, causing ceiling leaks and water damage to the floors below.
2. Bathroom
Bathrooms are constantly exposed to water. Even a small mistake in the waterproofing process can lead to water leakage into adjacent rooms or lower floors.
3. Balcony
Rainwater tends to accumulate around corners, wall junctions, and drainage outlets. Over time, this can cause cracks, peeling finishes, and water infiltration.
4. Exterior Walls
Wind-driven rain can pe*****te even the smallest cracks in exterior walls, leading to dampness, mold growth, peeling paint, and reduced building durability.
5. Water Tanks & Basements
These areas are continuously exposed to water or significant hydrostatic pressure. Choosing the appropriate waterproofing system is essential to ensure long-term durability.
Recommended Waterproofing Solutions for Residential Buildings
- Rooftop Waterproofing
Apply waterproofing membranes or polyurethane (PU)-based or cementitious waterproofing systems to create a durable protective barrier that prevents rainwater from penetrating the roof slab and damaging the floors below.
- Bathroom Waterproofing
Install a waterproofing membrane before tiling, with particular attention to pipe pe*******ons and wall-to-floor joints to prevent water leakage during long-term use.
- Exterior Wall Waterproofing
Repair existing cracks before applying waterproof coatings or waterproofing chemicals to prevent rainwater pe*******on while protecting both the paint finish and the wall structure.
- Balcony Waterproofing
Waterproof the entire floor surface and all wall junctions, while ensuring proper drainage slopes to prevent standing water and long-term deterioration.
- Concrete Crack Repair
Inject specialized repair resin or seal cracks with appropriate repair materials before waterproofing. This prevents water infiltration and helps extend the service life of the structure.
- Waterproofing is not an additional expense—it is a long-term investment.
Doing it right from the beginning protects your property, extends its lifespan, and saves you from costly repairs in the future.
CONMIK – Supporting Vietnam's Industrial Construction Projects
With over 20 years of industry experience, a nationwide network of more than 150 authorized distributors, and a state-of-the-art manufacturing facility spanning over 10,000 m², CONMIK delivers more than just construction materials—we provide comprehensive waterproofing and building protection solutions.
Whether you're developing factories, warehouses, commercial buildings, or infrastructure projects, our technical team is committed to recommending the most effective solution while optimizing your investment costs.
Contact CONMIK today to receive expert technical consultation and a waterproofing solution tailored to your project's specific requirements.
-----------------------------------
Waterproofing must be CONMIK!
Hotline: 024.3259.5539
Website: https://conmik.com/