https://www.facebook.com/107045559139333/

Seven 7 Upholstery

Home
United States
Yukon, OK
Seven 7 Upholstery

Call Directions

My focus is upholstery and leather work/leather tooling! Give me a shout for quotes: 1(580)478-2100

10/13/2026

A little late-night paint session for Mitchell Echols ’82 Jimmy! 🔥

We mixed up some Porsche Mint Green to match the truck’s main exterior color and finished these parts with SPRAYMAX Satin 2K Clear.

Can’t wait to see this one come together!

Swipe to the end to check out the awesome paint and striping Mitchell laid down. 🎨

Follow along for more custom upholstery projects from our shop. 🔥

10/05/2026

First full week on the ’72 K5 for PHAT PHABZ LLC, headed to SEMA Show at the end of the month—and we’re rocking and rolling. 🔥

We’ve been in full fabrication mode: carpet padding throughout the cabin and building the foundations for the newer model rear seat, rear quarter panels, door panels, and console.

We’ve also been sourcing parts, including an Alpine USA head unit, soft RGB LED accent lighting, and air vents. We’re putting our drafting skills to work creating custom 3D-printed pieces like fuse panel covers, duct and vent couplers for the Vintage Air system, speaker rings, and speaker pods.

Still a lot to do, but this K5 is starting to take shape. More updates coming soon!

09/22/2026

We just wrapped up the interior on this 1972 Chevy K5 Blazer, keeping the design clean, classic, and similar to its original style. 🔥

Our client wanted to recreate the original-style interior using cream leather, with pressed filigree accents made from veg-tan leather sourced from Traditions Leathercraft LLC The custom brass filigree stamps were produced by , allowing us to repeat the factory-inspired pattern throughout the build.

The seats, door panels, center console, visors, and rear quarter panels were completely re-covered in cream leather, and the carpet kit was custom made using black German square-weave carpet from .

Classic ’72 styling, rebuilt from the ground up. What do y’all think?

09/04/2026

Odds and ends Friday - we knocked out a few smaller projects to start the week.

First up was a matching headliner and visor set for Yvonna Easley ’69 C10 bench seat we recently finished. Both were wrapped in the same cream and green leather, with double-stitched cream diamonds in the green inserts and green stitching on the cream to tie the entire interior together.

Next was a full custom carpet kit for an all carbon fiber blue ’69 Camaro built by the guys at Trick Rides Every piece was patterned, cut, stitched, bound, and installed in-house for a clean, tailored fit.

Lastly, we factory re-foamed and recovered the front bucket seats and rear bench for a 1970 Super Snake Mustang.

Three different projects, all the same Seven 7 quality, wrapped up and headed back out the door.

08/28/2026

This ’69 C10 bench seat got the full Seven 7 treatment.

We replaced the original cushion springs with modern foam, added bolsters, and integrated a flip-down center armrest with a wireless phone charger hidden inside the top. We also built a front-mounted cupholder console that moves with the seat.

Everything was wrapped in cream and green leather with contrasting details throughout. The green inserts received cream double-diamond stitching, while the cream bolsters and outer sections were finished with green stitching and French seams. Polished stainless Chevy emblems on the backrest added the perfect finishing detail.

We also added factory armrests to the door panels and wrapped them in matching green leather.

Classic C10 style—with a hell of a lot more comfort and function.

The headliner and visors have been added to the re-covering list to complete the rest of the interior, so keep an eye on my page for those over the next few days.

Yvonna Easley and her C10 will be headed down to Gainesville next weekend for the Classic Truck Nationals—be sure to stop by, check it out in person, and ask her about everything that went into the new interior!

08/18/2026

A classic Bronco deserves an interior built for the way it’ll actually be enjoyed.

For this 1966 Ford Bronco “Pearl”, the seats arrived upholstered, so we created the rest of the interior to complement their existing colors. That included custom side panels, a compact floating radio enclosure, a matching shift boot and trim ring, wrapped dash pad, and a larger center console offering plenty of additional storage. As well as Powder coated the rear seat frame white, handled by Powder Rangers LLC.

I also wrapped the existing subwoofer and speaker enclosures, then finished the cabin with woven marine carpet. Since this Bronco will eventually live in Florida. The marine-grade flooring provides a clean, finished look while being practical for its new coastal life.

Thanks for looking, hit me up for any of your custom automotive interior needs! 🔥✂️

08/17/2026

We had the opportunity to create several key interior pieces for this Chevy II Nova, set up for drag-and-drive events. We installed a new headliner and sail panels, then shaped the foam and upholstered the custom 60/40 rear bench—designed around the roll cage and styled to match the front Kirkey Racing Fabrication racing seats using Kirkey-supplied material.

Finished off with custom snap-in carpet that can be removed for race days or easy cleanup.

Built to race. Finished to look right! 🏁

06/16/2026

🛩️ Complete interior flip on this Beechcraft Bonanza B36.🛩️

We took this one from the original gold and cream color combo to a full black, graphite gray, and orange interior.

Seats were recovered in black vinyl with orange stitching, orange French seams, and orange hexagon CNC inserts from Sanctum CNC

Headliner, dash and trim panels were wrapped in dark graphite gray suede, door and side panels were recovered in matching black vinyl. Gray carpet was installed throughout, while the seat belts and cargo net were rewebbed in black.

All interior plastics were refinished in black using SEM Products to tie everything together.

Clean, modern, and a whole lot sharper than what it rolled in with. The Seven 7 standard as always! 🔥

04/23/2026

Wrapped up this ‘87 GMC Jimmy this week.

Built and installed a front custom carpet kit, the factory replacement just wasn’t going to cut it on fitment. Finished it off with custom floor mats featuring stitched “JIMMY” logos to match the fender emblems, plus red binding to tie into the rest of the interior.

Every inch of this interior was touched — seats, dash, carpet bindings, and spare tire cover leather are in , paired with vinyl on the door panels, headliner trim, rear quarters, and console.

This is the level of detail you can always expect from a Seven 7 interior.

You’ll be able to catch this Jimmy at in Fort Worth in a couple weeks — Mitchell and Vanessa will have it out there alongside their matching red Chevy squarebody.

Follow along to see what’s coming next 👀
Like & share if you’d rock this setup 🔥

04/17/2026

We’re live in Guthrie at

Come by the booth, talk upholstery, and check out some recent work — including an ’87 Jimmy, with a ’93 Range Rover Classic on the way.

Take a walk through, check out the trucks, and support some solid vendors.

Don’t forget to grab a raffle ticket — they’re giving away a K15 at the end of the show Saturday.

Show hours:
Today: 12–6
Tomorrow: 8–6

See y’all out here.

Address

Yukon, OK
73099

Telephone

+15804782100

Website

facebook.com

Alerts

Be the first to know and let us send you an email when Seven 7 Upholstery posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Want your business to be the top-listed contractor in Yukon?