Prairie Precision Fab

Prairie Precision Fab Local family owned fabrication business in Wichita
Contact us for a quote!
(1)

Security First Title brought a table over that needed 4 new support braces in the middle and casters all the way around.
08/14/2026

Security First Title brought a table over that needed 4 new support braces in the middle and casters all the way around.

We had the opportunity to go out to McConnell Air Force Base and repair several aluminum fence pickets that had broken o...
08/14/2026

We had the opportunity to go out to McConnell Air Force Base and repair several aluminum fence pickets that had broken off!

Spiral staircase was in terrible shape and a huge safety hazard that the customer wasn’t aware of how bad it really was....
08/11/2026

Spiral staircase was in terrible shape and a huge safety hazard that the customer wasn’t aware of how bad it really was. We replaced 4’ of the main support post, new larger floor plate, and 4 hand rail post’s, 2 of which extended to the concrete for support. After we got done the stabilization difference was noticed immediately and everything was back in working order! (Larger diameter pipe was used because the customer did not want to wait on 3” pipe with a 2 week arrival time)

Flat deck out of Texas called and said he was out of service until he could get his bumper fixed, met him at the shop an...
08/06/2026

Flat deck out of Texas called and said he was out of service until he could get his bumper fixed, met him at the shop and got him wrapped up so he could stay on the road!

No project is too big or too small, we enjoy helping every customer!We recently wrapped up a couple of smaller repair jo...
08/04/2026

No project is too big or too small, we enjoy helping every customer!
We recently wrapped up a couple of smaller repair jobs. One customer needed modifications to some 6x6 post brackets for a carpentry project. The original design caused the mounting screws to interfere, so we cut one side off, repositioned it, and lowered it an inch to provide the necessary clearance.
Another customer brought in a bar stool with a couple of broken welds. We repaired the welds and added a little extra reinforcement to make it stronger than before.

Customer brought in a roll-off dumpster after it was damaged on a job site. The impact bent the door latch, hinges, and ...
07/26/2026

Customer brought in a roll-off dumpster after it was damaged on a job site. The impact bent the door latch, hinges, and warped the top rail, leaving the doors out of alignment. We straightened the latch, pulled the walls back into position, added reinforced gussets for strength, then realigned and reinstalled the doors so everything functions properly again.
Thanks Mighty Dumpsters for bringing it to us!

A customer brought us a boat with a damaged transom that was allowing the outboard motor to flex and crack the fiberglas...
07/24/2026

A customer brought us a boat with a damaged transom that was allowing the outboard motor to flex and crack the fiberglass.
We fabricated custom reinforcement plates for both the inside and outside of the transom, spreading the load across the solid fiberglass instead of the damaged area.

Another one wrapped! Thanks Security First Title for the work!
07/16/2026

Another one wrapped! Thanks Security First Title for the work!

Pizza Hut called and said their grease catcher from the fryers was cracked and leaking everywhere and needed it fixed AS...
06/28/2026

Pizza Hut called and said their grease catcher from the fryers was cracked and leaking everywhere and needed it fixed ASAP! A little stainless work and it’s backing to doing what it’s supposed to.

Customer rolled in with his dump trailer in urgent need of repair, he needed it back the next day. The latches that hold...
06/28/2026

Customer rolled in with his dump trailer in urgent need of repair, he needed it back the next day. The latches that hold the doors open when dumping and that holds the door shut while in transport were busted up and broke. We fabricated and installed new latches to secure those doors in both positions.

Address

4161 N Broadway Avenue
Wichita, KS
67219

Telephone

+13163504952

Website

Alerts

Be the first to know and let us send you an email when Prairie Precision Fab posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Prairie Precision Fab:

Shortcuts

Share

Category