JCM Associates, Inc

JCM Associates, Inc JCM Associates, Inc. provides mechanical services throughout the Washington DC Metropolitan area. We take pride in every project we take on and strive to communicate and accomplish the goals each one of our clients sets out to achieve.

These services include new construction, renovation and maintenance of HVAC and Plumbing systems for plan-spec, design-build and design-assist commercial and high-rise residential buildings.

Operating as usual

Hoffman Town Center is moving along rapidly now. The horizontal plumbing collection system is being installed in the ret...
01/12/2021

Hoffman Town Center is moving along rapidly now. The horizontal plumbing collection system is being installed in the retail levels. The HVAC and plumbing rough-in is up through Level 8, and the rooftop mechanical rooms are being prepared for upcoming equipment rigs. Stay tuned for another update after the equipment gets set on the roof.

#gojcm
#mechanical
#plumbing
#commercialconstruction

JCM would like to thank all of the employees, vendors, and family that donated to the Children's National Medical Center...
01/06/2021

JCM would like to thank all of the employees, vendors, and family that donated to the Children's National Medical Center "Dr. Bear's Closet" fund this year! Your generosity and love resulted in $83,889.00 in donations this year. We are also proud to announce that this year, we have surpassed 1 Million Dollars in total donations!!

For the past 18 years, JCM has been supporting "Dr. Bear's Closet" at Children's National Medical Center. This program provides opportunities for the patients and their families to have a distraction from the time spent in the hospital fighting their illness.

None of this would happen without the dedication and hard work of Donna Duke in our HR Department, JCM's President Jimmy, and all of our caring vendors and employees. We are so grateful for all of you!! Thank you!

#CNMC
#DrBearsCloset
#gojcm

#HappyNewYear2021 from JCM! While 2020 has been a trying year in many ways, our team adapted to the challenges we faced ...
12/31/2020

#HappyNewYear2021 from JCM! While 2020 has been a trying year in many ways, our team adapted to the challenges we faced and made 2020 a successful year. JCM would like to thank our incredible team and the fantastic clients we have the privilege of serving.

We're looking forward to a safe and prosperous 2021!

JCM is proud to congratulate our employees who received their 10, 20, and even 30 year anniversary awards this year. We ...
12/30/2020

JCM is proud to congratulate our employees who received their 10, 20, and even 30 year anniversary awards this year. We regret that we could not celebrate all together this year due to the pandemic. We are so proud of all of you and grateful to call you part of our family for all of these years. Your dedication to making this company great is unmatched!

10 YEAR AWARDS
Margarito Avelar
Michael Chasteen

20 YEAR AWARDS
Jaime Flores
Kevin Beaver
Jose A. Padilla
Jose B. Ibarra

30 YEAR AWARD
Jack Leverstein

#gojcm #mechanicalcontractor

JCM is proud to announce that Bryan Trusso has been voted as the employee of the month for December. Brian is a senior t...
12/28/2020

JCM is proud to announce that Bryan Trusso has been voted as the employee of the month for December. Brian is a senior technician and has been with JCM for just under 15 years. The quality of his work and his technical expertise has been nothing short of outstanding every day he comes to work here. Executives often tell us on his projects that he is like "having a tech/project manager all wrapped up into one on the job."

Brian is being nominated this month for his outstanding work at the NRL project assisting the team in planning a massive rig and installing 48 sectional Air Handlers that are 90' long, 65' ling Chillers, and 78 Strobic style exhaust fans.

Brian, thank you again for all of your hard work and excellent performance at the NRL project!!

#employeeappreciation
#gojcm
#NRL
#mechanical
#MEP

"If your actions inspire others to dream more, learn more, do more and become more, you are a leader." -John Quincy Adam...
12/24/2020

"If your actions inspire others to dream more, learn more, do more and become more, you are a leader." -John Quincy Adams.

Recently, our field leadership at the Hoffman Town Center held a raffle at the site for all of the installers. Our field Forman Edwin planned the entire event, gathered all of the prizes, and put a great effort to show his team that they are appreciated this holiday season! The guys won jackets, new tape measures, sweaters, and gift cards, all assembled by the project team. Outstanding leadership and camaraderie, everyone!

#gojcm #mechanicalcontractor

“Give me six hours to chop down a tree and I will spend the first four sharpening the axe.” – Abraham LincolnAny success...
12/17/2020

“Give me six hours to chop down a tree and I will spend the first four sharpening the axe.” – Abraham Lincoln

Any successful project has one main ingredient...planning! Whether it is rigging, fixture buyout, sleeve locations, spool drawings, or weekly problem solving, it all requires communication and planning. The Hoffman Town Center Project Team celebrated the topping out of the concrete this month with Balfour Beatty US, and you know what comes next—rigging the Penthouse! Our team has been planning and coordinating the upcoming rigging for two buildings and are ready to go. Stay tuned!

#gojcm #mechanicalcontractor

The new Thurston Hall Renovation Project at The George Washington University is underway! Clark Construction Group, LLC ...
12/15/2020

The new Thurston Hall Renovation Project at The George Washington University is underway! Clark Construction Group, LLC is executing a major demolition scope while JCM is mobilizing and starting the layout process and preparing for groundwork. Over a thousand new sleeve penetrations in new and existing slabs will be coordinated, and a new chiller plant in the basement will be one of the early activities. A big shout out to James Creighan at Hilti for helping us solve the hanging of thousands of feet of steel piping in 100 year old terra cotta. Stay tuned for construction updates as we begin groundwork.

#Hilti
#gojcm
#teamwork
#demo
#GWU

It's that time again! Fab Friday! Today we are taking a sneak peek at what goes behind those walls in an office building...
12/11/2020

It's that time again! Fab Friday! Today we are taking a sneak peek at what goes behind those walls in an office building core bathroom. Schedules are tight, and crane time is slim on almost every job. Having the capability to produce a large volume of prefabricated bathrooms ensures success. Execution is the key! Here you see hundreds of Zurn Industries, LLC Carrier Groups assembled, fabricated, tested, and ready to go.

#gojcm
#prefabrication
#fabfriday

December is a special month each year as we celebrate Christmas and our annual Dr. Bear’s Closet Drive. It’s also specia...
12/03/2020

December is a special month each year as we celebrate Christmas and our annual Dr. Bear’s Closet Drive. It’s also special because it’s our owner, Jimmy’s birthday! Jimmy is not only the best boss in the world to work for; he is a fantastic mentor, an amazing husband, father, brother, son, and leader. Jimmy, we all love you very much! Thank you for being the best boss we could ever have. Happy Birthday!!!

#gojcm
#happybirthday
#bossappreciation

This Giving Tuesday, JCM would like to share a cause that is near and dear to us. For the past 19 years, JCM has been su...
12/01/2020

This Giving Tuesday, JCM would like to share a cause that is near and dear to us. For the past 19 years, JCM has been supporting "Dr. Bear’s Closet" at Children’s National Medical Center. This program provides opportunities for the patients and their families to have a distraction from the time spent in the hospital fighting illness. They provide toys, games, books, and personal care items for children and their families and even provide housing for families who can’t afford a hotel. Donating to Dr. Bear’s Closet is a great way to give back and make a lasting impact on a child’s visit to the hospital.

This year, due to COVID, donations of physical toys are not able to be accepted. Checks can be made payable to “CNMC Dr. Bear’s Closet” and forwarded to Donna Duke at JCM by December 21st. JCM will personally deliver all donations to Children’s National Medical Center!

#gojcm #GivingTuesday

Happy Thanksgiving from JCM! We are incredibly thankful for the amazing team of men and women who have made our many acc...
11/26/2020

Happy Thanksgiving from JCM! We are incredibly thankful for the amazing team of men and women who have made our many accomplishments this year possible and the wonderful clients we have the privilege of serving.

#gojcm #thanksgiving

JCM takes great pride in congratulating Ray Solis for being voted Employee of the Month for November. Ray has been with ...
11/24/2020

JCM takes great pride in congratulating Ray Solis for being voted Employee of the Month for November. Ray has been with JCM for over 17 years and has become without a doubt the best layout engineer in the company. Year after year and job after job Ray proves that he is a leader, a winner, and a dedicated "blue blood" here at JCM. Ray, it's an honor to have you on our team! Keep up the great work!!!

#employeeappreciation
#gojcm
#employeeofthemonth
#hvac
#mechanical

It's Fab Friday! This week we're taking a peek at the mass volume of piping risers our fabrication shop produces and shi...
11/20/2020

It's Fab Friday! This week we're taking a peek at the mass volume of piping risers our fabrication shop produces and ships out every month. Maintaining tight schedules requires a lot of planning and execution, and risers must go in and be tested quickly to keep pace with close in. We make that happen on time, every time.

#gojcm
#fabrication
#mep
#prefab

Every year our very own Scott Karoly blesses us around Thanksgiving time with his award-winning homemade cheesecake. The...
11/17/2020

Every year our very own Scott Karoly blesses us around Thanksgiving time with his award-winning homemade cheesecake. There is no question that Scott makes the best cheesecake in Maryland! Scott, thank you so much...you're the best!

#cheesecake
#gojcm
#thanksgiving

We thank all of those who have served our great nation. Happy Veterans Day from JCM 🇺🇸
11/11/2020

We thank all of those who have served our great nation. Happy Veterans Day from JCM 🇺🇸

It's National Apprenticeship Week! We're joining the US Department of Labor in recognizing the benefits of apprenticeshi...
11/09/2020

It's National Apprenticeship Week! We're joining the US Department of Labor in recognizing the benefits of apprenticeships. Apprentices earn while they learn, reducing the potential to take on debt. Workers who complete apprenticeship programs earn $300,000 more over a career than their peers who don’t. And 94% of apprentices retain employment after completing an apprenticeship program.

#NAW2020 #NationalApprenticeshipWeek #GOJCM

Happy Fab Friday!!! Today we give a big shout-out to our leader Carl who always puts in long hours, plans, executes, and...
11/06/2020

Happy Fab Friday!!! Today we give a big shout-out to our leader Carl who always puts in long hours, plans, executes, and, as you see here, can even be caught fabbing a set of risers himself on any given Friday. He does it all and leads by example! Carl, you are the best! Thank you!

#gojcm
#blueblood
#fabrication

11/03/2020
Reston Gateway Update

JCM's Reston Gateway team recently installed (5) Baltimore Aircoil Company Series 3000 Induced Draft Cooling Towers on the roof. Over 50,000 lbs of equipment was lifted and assembled in one day. Now it's time to set the rest of the equipment and pipe it out. Stay tuned!

#gojcm #mechanical

Happy Halloween from the JCM Team! Have a safe and fun weekend.
10/30/2020

Happy Halloween from the JCM Team! Have a safe and fun weekend.

During cold weather conditions, liquids are likely to freeze, blocking or restricting the flow within the pipes. It is c...
10/30/2020

During cold weather conditions, liquids are likely to freeze, blocking or restricting the flow within the pipes. It is critical then to have a system in place that eliminates the chance of bursting or freezing. A heat trace system essentially does that and is one of the most reliable ways to protect a system.

We would like to thank Al Steinbach and James Scott from Heat Tracing Sales & Thermal Devices for coming out recently to our office and training our PM team on newer technology, product installation, and overall heat tracing system requirements. Our PM and Jr PM staff had a great lunch and great session. Thank you so much, guys!

www.heattracingsales.com
https://www.linkedin.com/company/thermal-devices/

#gojcm #heattracing

Come join a great company! JCM Associates is looking for a Senior Pre-Construction Manager. Apply Now! www.workatjcm.com...
10/26/2020

Come join a great company! JCM Associates is looking for a Senior Pre-Construction Manager.

Apply Now! www.workatjcm.com

Excellent salary and a full benefit package including life, health, paid vacation, company funded retirement savings, paid holidays and 401k.

#GOJCM #mechanical #construction

JCM Is pleased to announce the award of the following new projects. Project Name: Camp Lejeune P378 CH053 Hangar The han...
10/20/2020

JCM Is pleased to announce the award of the following new projects.

Project Name: Camp Lejeune P378 CH053 Hangar

The hanger project will be 297,170 sf three module Type II Aircraft Maintenance Hangar to provide hangar bays, maintenance shops, flight line operations, aircraft maintenance operations, and aviation operations function spaces. All of this will be to support three CH-53K squadrons with 16 aircraft each. The hangar will include a multi-story crew/equipment/administrative area at the rear of the hangar bay. The new work will consist of an aircraft hangar, associated maintenance shops, administrative spaces, personnel spaces, aviation operations spaces, parts and tool storage, hazardous materials storage area, associated aircraft support equipment, information systems, fire protection and alarm systems, and Energy Monitoring Control Systems.

Project Name: Camp Lejeune P707 BEQ

This project will be a 75,487 SF three-story bachelor housing complex for permanent party military personnel. There will be 165 Marine Corps rooms along with required support spaces.

Congratulations, Pre-Con Team!

#gojcm #commercialconstruction

10/16/2020
Fab Friday

It's Fab Friday!! Today we take a sneak peek at a new RIDGID Tools 1224 threading machine our shop installed this week. Many projects still specify large bore piping to have threaded connections. If you have ever tried to thread 4" diameter schedule 40 steel, you know it takes a reliable tool to do the job. JCM's work depends on joining, forming, and connecting pipe, and we trust RIDGID equipment to get it done.

#fabfriday
#mechanicalfabrication
#fabrication
#GOJCM

Trimble Inc. Total Stations are a huge part of our daily workflow. A big thanks to Jeff Soscia at BuildingPoint SouthEas...
10/14/2020

Trimble Inc. Total Stations are a huge part of our daily workflow. A big thanks to Jeff Soscia at BuildingPoint SouthEast for coming out and training a new group of operators and coordinating the delivery of another new unit.
#Trimble
#totalstation
#gojcm

Our Assistant PMs recently started their next phase of training by rotating projects and performing quality control comp...
10/06/2020

Our Assistant PMs recently started their next phase of training by rotating projects and performing quality control completion lists. Continual training is crucial and builds everyone's toolbox. This trip, our team learned about 4 pipe systems, high, medium, and low-pressure steam, and steam condensate.

#gojcm #commercialconstruction

JCM would like to congratulate Fitter Forman Alex Lopez for being voted Employee of the Month for September. Alex has be...
10/01/2020

JCM would like to congratulate Fitter Forman Alex Lopez for being voted Employee of the Month for September. Alex has been with JCM for almost two years now and has impressed everyone he works with. Alex has an exceptional level of expertise, strong attention to detail, and is continually striving for his work to be perfect. Congratulations, Alex! We are all very proud of you!

#employeerecognition
#gojcm

09/29/2020
Clark Construction Group, LLC

We've enjoyed working on this project with you, Clark Construction Group, LLC!

Last week, Clark Construction ceremoniously topped out of 1950 and 2000 Opportunity Way at Reston Town Center in Virginia! The new 28-story and 20-story office buildings are part of Reston Gateway, a 4.8-million-square-foot mixed-use project adjacent to the future Reston Town Center Metro Station.

To bring the first phase of this transit-oriented development to full height, the Clark Concrete and Miller & Long Concrete teams have poured over 140,000 cubic yards of concrete over the past two years.

Thank you to the entire project team for your hard work and dedication! #ClarkBuildsVA

Owner: Boston Properties
Concrete: Clark Concrete & Miller & Long DC
Electrical: Helix Electric
Excavation: The Anderson Company
Mechanical & Plumbing: JCM Associates, Inc
Designer: Duda|Paine Architects

JCM's fabrication shop has been firing on all cylinders over the past few months. This week's FAB Friday is highlighting...
09/25/2020

JCM's fabrication shop has been firing on all cylinders over the past few months. This week's FAB Friday is highlighting our amazing hanger crew. Our hanger team assembled over 4,000 clevis hangers that immediately shipped out for installation across multiple projects this week. That's enough hangers for nearly 5 miles of piping. Great Work, Carl, Deena, and all of our shop tradesmen!

#gojcm #mechanicalcontractor #prefabrication

09/23/2020
UMCP New Dining Hall Training

A big shout out to Todd Joyce and The Joyce Agency- HVAC Products Group for recently coming out to train our team at the new University of Maryland College Park Dining Facility project. Our team is installing BLÜCHER stainless steel piping for the grease waste system. BLÜCHER is a Watts brand and is one of the leading manufacturers of stainless waste piping in the world. JCM is fortunate to be able to utilize a newly designed cutting machine that bevels and de-burrs the piping, which reduces labor and increases efficiency. Great Tool, Great Piping Manufacturer, and Great Local Rep! Thanks, Everyone!

https://www.thejoyceagency.com/
http://blucherpipe.com/
#joyceagency
#GOJCM
#teamwork

Happy #NationalTradesmenDay from JCM! Today we celebrate the men and women who keep our nation moving forward through th...
09/18/2020

Happy #NationalTradesmenDay from JCM! Today we celebrate the men and women who keep our nation moving forward through their skills and hard work day in and day out.

#gojcm #mechanicalcontractor

Once a building has been brought to life, anything can happen. JCM’s Tech Team is prompt, courteous, and always successf...
09/16/2020

Once a building has been brought to life, anything can happen. JCM’s Tech Team is prompt, courteous, and always successful!

#gojcm #mechanicalcontractor

Today, we celebrate the labor of American workers past and present. We reflect on their hard work and dedication that co...
09/07/2020

Today, we celebrate the labor of American workers past and present. We reflect on their hard work and dedication that contributes to the advancement of our great nation. JCM would like to commend our hardworking team for their role in moving our industry and our country forward.

Happy #LaborDay2020 from JCM!

#gojcm #mechanicalcontractor

JCM is pleased to congratulate David Aguilar for being awarded Employee of the Month for August. David has been employed...
09/04/2020

JCM is pleased to congratulate David Aguilar for being awarded Employee of the Month for August. David has been employed here at JCM for over 12 years and has consistently gone the extra mile. If you need David on site for a special project or emergency, he is always there with no questions asked. David is a fantastic employee, and we are proud to have him as part of our team! Nice work, Dave!

#gojcm
#employeeappreciation
#employeeofthemonth
#mechanical
#commercialconstruction

Mock Up installations are critical on any job. They allow us to verify that the installed products are exactly what the ...
09/02/2020

Mock Up installations are critical on any job. They allow us to verify that the installed products are exactly what the client expects. They also allow the client to visit our shop and make changes early if necessary. Here we see Carl, one of our PM’s, inspecting a Johnson Controls Model FHP Horizontal Trane Fan Coil Unit Mock Up to ensure the contract details have been followed. Once complete, he will have the university visit and perform their initial inspection. Doing this early helps eliminate issues long before they become a problem.

#prefabrication
#mockup
#gojcm
#universityofmaryland

Address

301C Prince Georges Blvd
Upper Marlboro, MD
20774

Alerts

Be the first to know and let us send you an email when JCM Associates, Inc posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to JCM Associates, Inc:

Videos

People are our Capital, Our Capital is our People...

Openings its doors with only three employees and a master plan, the company has grown to over 300 dedicated men and women. These employees are select individuals who believe in commitment, leadership and quality service for JCM’s customers. Office Buildings to Mixed Use Residential, Laboratories to College Dormitories, Data Centers to Hospitals, JCM is able to handle ANY large scale commercial construction endeavor.

Nearby contractors


Other Construction Companies in Upper Marlboro

Show All