https://www.facebook.com/468248020273511/

Progressive Painting 608

Home
United States
Sun Prairie, WI
Progressive Painting 608

A painting and remodeling business based in Madison wi. We do it all! Call or email now for a free e

09/19/2025

We finished up this beautiful project last week.
Removed the popcorn texture off the ceiling. Some of the wood work went white, we freshened up the stone around the fire place and painted a few walls.
Sherwin-Williams Gallery was the top coat of choice on the wood work. Gosh that stuff is nice!!

(The tile flooring is being replaced, disregard the over-spray in there)

09/09/2025

New filters on the respirators? ✔️

Its prime time, baby!!

Spraying two coats Oil based Easy Sand primer on all the wood work in this home.

09/08/2025

Another exterior wrapped up! This one got the biggest transformation out of them all for us this season. From Red and Blue to Dorian Gray and Iron Ore. Another fantastic home owner couple that was super easy and fun to work for. They got the color scheme from ChatGPT and we did our best to match what the A.I. spit out. Pretty cool!

Dorian Gray on the body of the house, Iron Ore on the trim, windows and gutters. Vinyl safe formula Iron Ore for the vinyl windows. All in Emerald Rain Refresh. We painted a "faux band board" along the bottom of the front of the house, so the fascia above the garage door flows across the entire front of the house.
The deck got 2 coats of SuperDeck Deck and Dock, also in Dorian Gray.
The front door and garage got a custom color, trying to match a cedar tone that the customers wanted.

As always, huge thanks to Sherwin-Williams Sun Prairie store for keeping us supplied with quality products and equipment.

On to the next one!

09/04/2025

After skim coating these ceilings with drywall mud, sanding and priming we go back through and fix any small imperfections. We add a tiny bit of chalk from a chalk line to tint our spackle. This way we can easily see any and all spots that we fixed when we come back to sand them.
This ensures every spot we touch, gets sanded to perfection before paint. We don't have to strain to see white spackle on white primer on a ceiling and we don't have to use tape to mark the spots.
Saving a couple minutes here and there adds up over the course of a week or a full job like this!

08/31/2025

We started on this beautiful home earlier this week.
Popcorn texture removal is the first step of the process.
We covered and protected the stone and wood work. Sanded off the popcorn using a drywall sander connected to our Festool dust extractor with a HEPA filter. Oil primed everything to give a good base for everything to stick to. And then skim coated the entire surface with drywall mud to give a level 5 finish!
Pretty labor intensive, holding that drywall sander over head kicked my butt! But we persevered and got it done.

A lot more to come on this project, you won't want to miss the rest of this one!

08/30/2025

New toy, I mean tool...
Excited to break it in this upcoming week, I'll be sure to post some videos of it in action.

08/25/2025

Spraying some gutters today, and obviously the straps and screws need to be painted to match.
Here's an easy way we've found to make sure all sides of the screw heads get coated at once. No fancy tools or equipment needed, just a piece of cardboard!

08/23/2025

Pro tip - When spraying out of a gallon can a Frog Tape (the best tape around) lid fits perfectly on the top of the gallon can. Cut a little slit for the intake tube and viola!
This helps keep the product in the can from gumming up and prevents a film on the top of the product.

08/21/2025

We are making progress on this exterior project.
Here's a little sample of how things have been going the past few days...
You're probably wondering "why is he leaving the bottom 4-5 inches unpainted?" You'll see...

Just a few more days and this face lift will be complete! Can't wait to share the full before/after photos.

08/16/2025

Started on a new exterior project this past week. This one is gonna be sweet! From the red/blue color scheme on there now. To some darker grays and cedar tone on the doors.
In this video, you'll see us scraping and sanding all of the wood.
Then priming with PrimeRX. It applies white and dries clear, and acts almost like a glue. Its a thick product that helps fill in low spots as well as "locking down" the remaining paint on the wood.
And then we started applying Emerald Rain Refresh to the aluminum fascia in Iron Ore.

As always, Sherwin-Williams Sun Prairie store keeping us supplied with all of the best products on the market! Couldn't do it without them.

We will post a couple more videos like this over the next week documenting the process.

08/11/2025

Follow up post regarding our recent project...
Did a bunch of work in a local private school this past week. 3rd shift while the building was empty, we painted 7 different areas. Out of respect for the school and students, we won't be posting many photos from the job.
But take a look at these bathroom stall dividers!
From dingy, dirty and rusty.
To sealed up, clean, fresh and durable!

We used a rust inhibitor primer to prevent it from spreading. And then two coats of PreCat Waterbased Epoxy over the top.

As always, big thanks to Sherwin-Williams Sun Prairie store for supplying us with the best products on the market!

08/04/2025

Not every job is glamorous, but the show must go on!
Getting these divider/partitions cleaned up.
Clean them, sand them, Kem Kromik on the rust to help stop it from progressing, and 2 coats of Pre Cat Epoxy to top them off.

I'll have photos of the finished product in a couple days!

Address

Sun Prairie, WI
53590

Telephone

+16086222820

Website

facebook.com

Alerts

Be the first to know and let us send you an email when Progressive Painting 608 posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Progressive Painting 608:

Shortcuts

Want your business to be the top-listed Contractor in Sun Prairie?