Matthew Penn Drywall

09/18/2025

09/10/2025

We are happy to support our Charity League!

🎉 Sponsor Shoutout! 🎉
Give it up for Matthew Penn Drywall 🙌 We’re so thankful for their support in helping us make a difference for the youth of Martinsville & Henry County! 💙

When you see their name, you know the job’s getting done right 🛠️👏 Thank you, Matthew Penn Drywall, for backing our mission and our community! 💫

08/27/2025

The most talented facepainter and girl I know! Follow her at Joyful Canvas Facepaint by Maci, LLC, and book her for your next event!

08/21/2025

Getting Sheetrock Paint-Ready!!

Preparing sheetrock for paint is a critical step in achieving a high-quality finish. After installation, all joints and fasteners must be properly taped, mudded, and sanded to eliminate visible seams and surface irregularities. A thorough inspection under good lighting helps identify flaws that may require a skim coat for a true level-five finish. Once sanding is complete, surfaces should be cleaned of dust and debris to promote adhesion. Applying a high-quality primer is essential, as it seals the drywall, evens out porosity, and ensures optimal performance of the topcoat.

08/19/2025

08/12/2025

Drywall hangers can only work as clean as the framework they’re handed. If the studs are bowed, out of plumb, or all over the place, it turns a smooth hang into a fight. You end up wrestling sheets into place, carving odd cuts, shimming gaps, and chasing corners that don’t meet. That’s how seams pop and walls wave.

But when the framer does their job right — straight studs, square corners, everything on center — it’s a whole different story. Sheets go up fast, seams line up tight, and the mudder’s life gets a lot easier down the line.

Good framework is like a good foundation — without it, nothing stays true. The drywall hanger might be the one closing in the walls, but if the bones aren’t right, the finish will never be.