Phoenix Coating Solutions

Directions Website

Phoenix Coating Solutions We at Phoenix Coating Solutions are here to provide you the best in interior and exterior coatings. https://www.instagram.com/phoenixcoatingsolutions/

Check out this crazy transformation!! Small garage but needed an absolute ton of work. This concrete was a MESS. We are ...
10/02/2026

Check out this crazy transformation!! Small garage but needed an absolute ton of work. This concrete was a MESS. We are talking cracks all the way down to the ground, cracks as wide as half an inch or more and areas where it sunk some.

✅First thing we did was diamond grind. This served more for leveling the surface as it was not very flat.
✅Next we filled all the cracks with a filler which is my fine and medium blend sand. This achieves 2 things. It fills the crack so we keep it from draining to the ground and once we pour our urethane it soaks into the sand and hardens everything and bonds tightly. Once cured this is ground flat
✅Next we vacuumed the surface and then shot blasted the concrete for a very heavy profile. This is important for my V***r Barrier.
✅First Coat is the V***r Barrier. This completely waterproofs the slab and protects it from any moisture related issues. This is important because this resists any issues again with moisture that can cause the system to fail if there is a moisture issue.
✅After the V***r Barrier we sanded this coat for the intermediate coat to adhere properly. This coat is my Poly Flex. I recommended this and always do for slabs that have issues with cracks. We utilize this polyurea coat as it has superior flexibility and will allow for movement.
✅Last coat is my Polyaspartic. This seals and protects the flake from any staining while being resistant to abrasions and UV stable. This also has some flexibility to help aid in areas prone to cracking more.

****when you get bids on your floor, make sure that company is asking you specifically what your use is for your floor and make sure they always recommend a v***r mitigating system!! If not look elsewhere.
- Common things to look for
* Are they specifying what what system they recommend and why.
* Are they looking at details. For example cracks. How will they address cracks? How big are they and will they recommend stitching and why or why not.
* Are they telling you how thick your system will be. Not saying it’s this thick or this thin. Look for someone that is telling you how many mils. For example floors can be as thin as a 5-8 mils thick for grind and seals urethanes and such. Or as thick as urethane cement systems which can be upwards of 500 mils which would be upwards 1/8-1/2” inch thick.

It’s a lot to read through. But I strive to be very transparent in the work I do and want everyone to know a lot goes into your floor to make it last. Also hiring someone that knows the right system for your needs.
Call me for a Free Quote on your floor! New or old. I can fully transform it.
616-799-3126

Got a small back patio we just finished! Newer concrete so minimal defects. We diamond ground for proper preparation and...
09/28/2026

Got a small back patio we just finished! Newer concrete so minimal defects. We diamond ground for proper preparation and then we put down my fast set epoxy base coat and one of my favorite blends - Claystone. Super nice color! Check out the before and afters. Dull basic concrete to a beautiful yet durable flooring system.

Call today to schedule your Free Quote
616-799-3126

Got a 3 stall in need of some decent repairs. This garage had two areas completely failed all the way down to the rebar!...
08/18/2026

Got a 3 stall in need of some decent repairs. This garage had two areas completely failed all the way down to the rebar! We hammered everything out and also hammered around the areas to listen for hollow and sound areas. After that, we cleaned and then filled them with epoxy. These were probably close to 2” deep, so we needed something to be able to handle filling something so deep and bond correctly.

After that cured we ground it flat and then installed my primer and then my intermediate coat and then my polyaspartic top coat to finish it off!

Color- CreekBed

Call today for your Free Quote!
616-799-3126
[email protected]

Small 1 stall we just completed in Kalamazoo! Brand new floor, client wanted a coating that would not only last but be e...
08/15/2026

Small 1 stall we just completed in Kalamazoo! Brand new floor, client wanted a coating that would not only last but be easy to clean up! Easy task for us!

Shot blasted for preparation, we filled the joints that had plastic zip strips when the concrete was poured and we then put down our low viscosity epoxy primer. This is designed to pe*****te deep into the pores, this coat is designed specifically to do just that. We then go over wet on wet with our 100% solids epoxy intermediate coat. This coat is designed to bond to the primer and then create a thick base for the flake to sink into and bond. Primers are incredibly important and most companies skip this part. Overall a stronger and thicker system resisting peeling and failure. There is zero chance doing this process and I guarantee it!

Color - Stoney Creek

Call today at 616-799-3126 for your Quote!

Just finished this small basement up in Muskegon! Client had old peeling DIY epoxy and wanted a durable finish that woul...
08/13/2026

Just finished this small basement up in Muskegon! Client had old peeling DIY epoxy and wanted a durable finish that would last. I came in, diamond ground, filled the joints to make it a seamless floor and laid down my MVB Epoxy System and Non yellowing Top Coat!

Color - Schist Stone

Call today to get your old surface refinished!
616-799-3126

Or click the link below to fill some questions out about your project!

https://clienthub.getjobber.com/hubs/c0e91dc2-5961-4f6b-8d21-4bfd9ce897b9/public/requests/1041811/new

We just completed a set of bathrooms for our local school! Thank you Tri County Area Schools We took their old tile and ...
08/12/2026

We just completed a set of bathrooms for our local school! Thank you Tri County Area Schools

We took their old tile and transformed it with epoxy! No more grout lines to harbor bacteria and making it much easier to clean!

Call today for your Free Quote!
616-799-3126

When choosing a company make sure they know what to do if you know you have moisture issues or it is a possibly. This is...
07/30/2026

When choosing a company make sure they know what to do if you know you have moisture issues or it is a possibly. This is an example of two things.

First, why you don’t use epoxy top coat in a space that will see UV rays. Epoxy is not UV stable and will amber (first picture) eventually. Sometimes almost right away others it can take longer.

Second, if you don’t put down the proper product when moisture is an issue picture 2 is what will eventually happen. When a coating comes up like this something has gone wrong. If installed properly, with the proper products for the floor, concrete should come up and be attached to the coating and ONLY if physically damaged or manually removed. In this case, the customer is near a body of water and they have moisture that comes up through the concrete when the water table rises. When this happens the coating does not bond to the pores of the concrete like it should, as seen in the picture, and eventually will fail. Moisture can also cause bubbling under the coating as well.

Prep is so very important when installing this type of flooring to get a proper bond. However, knowing what type of product needs to be used and being able to identify issues like moisture is equally as important.

We were called to fix a floor for a customer a couple of weeks ago from a different company. This floor had multiple coa...
07/30/2026

We were called to fix a floor for a customer a couple of weeks ago from a different company. This floor had multiple coats on it in an attempt to fix problems that arose. In the end the coating ambered and had thin and thick spots throughout. This is a look into what goes into removing a previous coating and why we tell our customers to do their research when picking any company. In the end we want you to have a beautiful floor that lasts and that’s exactly what we did here! Check out the difference!

Mention this post and get 700 off of your floor when you book with me in the next 2 weeks

Call today for your Quote!
616-799-3126

Or click the link and fill out some questions about your project!

https://clienthub.getjobber.com/hubs/c0e91dc2-5961-4f6b-8d21-4bfd9ce897b9/public/requests/1041811/new

This weekends job was a decent sized front porch! We diamond ground to prepare the surface and then used my fast set hig...
07/25/2026

This weekends job was a decent sized front porch! We diamond ground to prepare the surface and then used my fast set high build epoxy and polyaspartic top coat to build the system and using one of my favorite chipped stone colors
-Dolerite

Let me take your old or stained porch or patio and completely transform it!

Call today or click and fill out the link below about your project for your quote! 616-799-3126

https://clienthub.getjobber.com/hubs/c0e91dc2-5961-4f6b-8d21-4bfd9ce897b9/public/requests/1041811/

07/22/2026

Summer is a great time to upgrade floors that need to stand up to sun and wear. Our TREADRIGHT Polyaspartic coatings cure quickly, which means less downtime and more time to enjoy your refreshed space.

These coatings are built for high performance and resist UV damage, so your floors keep their color and finish even when the sun is strong. We like how this option works for people who want efficient, long-lasting protection without waiting days for floors to be ready.

If you’re planning a flooring project that needs to look great and keep up with your summer routine, let’s talk about polyaspartic coatings.

Address

Sparta, MI
49349

Website

Alerts

Be the first to know and let us send you an email when Phoenix Coating Solutions posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category