EKO Powder Coating

Our facility is set up with the latest state-of-the-art equipment. We have a pre-treatment wash bay that is equipped with a high pressure hot iron phosphate washer to ensure proper cleaning of every single part. The parts will then go through the oven for a short period of time in order to dry off. We let our parts cool down to the appropriate temperature where they will then go into our totally e

nclosed spray booth. After the parts have had the powder applied with an even coat they will go into the oven for curing for anywhere from 10-30 minutes depending on the powder manufacturers specs. At EKO Powder Coating, we offer dry blasting as our primary way to sand blast. Dry blasting is the most economical way to prepare parts for powder coating. This method is used to strip parts of old paint or to clean new steel for the best surface prep for powder coating. PHOSPHATE
This is the most important part of the entire process. Our phosphate cleaning bay is equipped with a customized high heat, high pressure automatic washer to remove any oils or dirt from the parts prior to applying the powder. Phosphate adds another layer of protection to ensure a long life for each powder coat job. POWDER APPLICATION
Our Rohner spray booth is the best in superior quality, high-performance paint spray booths that can handle the most diverse of coating and finishing applications. This booth is enclosed keeping the work environment safe, clean and efficient. As well as having Rohner spray booths, we also have Sames-Kremlin sprayers. These sprayers allow us to ensure high transfer efficiency with high voltage total control, high finishing quality with premium equipments and adaptive voltage/current curve to coat in any conditions.