Ben's Plumbing, Heating and Air

Home
United States
Seattle, WA
Ben's Plumbing, Heating and Air

We have proudly served the Greater Seattle and Eastside for over 25 years, earning a reputation for reliability and quality. Need a licensed plumber?

As a licensed plumber with the Washington State Department of Labor and Industries, we are committed to safety & professionalism. Ben’s Plumbing provides trusted plumbing services in Seattle, specializing in drain cleaning, sewer line repair, and HVAC services. We offer reliable residential plumbing services and use quality materials for lasting results. As a leading Seattle plumbing company, we focus on professionalism and customer care. Contact us for expert plumbing solutions!

10/06/2026

Ben's Plumbing & Drain Cleaning completed water heater repair and replacement services in Redmond, WA. Upon inspection, the technician identified a malfunctioning unit that was no longer providing adequate hot water. The existing water heater was dismantled and replaced with a new, efficient unit that improves energy consumption and water heating performance. The technician ensured all connections were secure and that the new model met local codes and standards. Following installation, the new water heater was tested to verify that it operated correctly and consistently supplied hot water. In addition, the technician provided the homeowner with information on proper maintenance practices to extend the lifespan of their new water heater. The job was completed thoroughly, ensuring customer satisfaction with the quality of service and the new installation in their home.

09/15/2026

Hot water used to last through two showers. Now it doesn't.
Nothing in the house changed, so what did?

Three things affect how much hot water you actually get, and any one of them can shift without you noticing:
📍The temperature of the incoming water. Colder incoming water means your heater starts further behind, and you draw more from the tank to reach the same shower temperature.
📍What's sitting at the bottom of the tank. Sediment builds up over the years and takes up space that used to hold hot water. That rumbling sound during heating is what it sounds like.
📍How long the tank gets to recover. A heater refills far slower than most people expect, so a shorter gap between showers changes the outcome even when nothing is wrong with the unit.

We explained how each one works and how to tell which is yours:
https://bens.plumbing/blog/running-out-of-hot-water-in-the-shower/

09/08/2026

Seattle gets close to 39 inches of rain a year, and most of it shows up between October and April.

Which means your sump pump is about to go from doing nothing all summer to working six months straight. If something went wrong down there while it sat idle, the first big storm is how you'll find out.

Testing it takes ten minutes, a bucket, and a flashlight:
1. Look in the pit first – clear out gravel, silt, anything that's fallen in
2. Pour water in slowly and watch the float rise
3. The pump should kick on before the water nears the top, run steady, and shut itself off
4. Then go outside and confirm water is actually coming out of the discharge line

That last step gets skipped almost every time, and it's the one that catches a crushed or blocked pipe.
Do it in September, while you still have time to order a part and book an appointment at a normal rate. Do it in November, and you're in line behind everyone else who waited.
Full guide – what to check when it fails the test, how long these pumps actually last, and how to test your battery backup – is on the site.
https://bens.plumbing/blog/how-to-test-your-sump-pump/

07/30/2026

Picture two scenarios. In the first, a technician inspects your sewer line on a schedule that suits its condition and catches a tree root before it causes a serious blockage. In the second, you find out about that same root in the dead of winter – when sewage backs up into your basement, at night, as an emergency, and for a whole lot more money. 💸

✅ Preventive maintenance is that first scenario. A video inspection can reveal cracks, sags, and roots before they cause bigger problems, while preventive cleaning – including hydro jetting when appropriate – removes grease and buildup before they block the line. The payoff: preventive care can help your pipes last longer and make sudden clogs and backups less likely.

That's especially true for older homes and yards with big trees near the sewer line.
📅 Schedule your annual sewer check with Ben's Plumbing in Seattle: 📞 +1 206-222-9297

https://bens.plumbing/services/sewer-line-repair-seattle/

07/24/2026

If your sink, tub, or shower smells like sewer, the cause often comes down to one of three common problems:

🦠 Buildup inside the P-trap and along the pipe walls – grease, food scraps, soap, and hair – and the bacteria breaking it all down are what create the odor.
💨 The water seal in the P-trap has dried out (common in sinks you rarely use), so sewer gas comes straight up into the room.
🚱 A clog or a venting problem deeper in the line.

What you can try yourself:
🔹 Flush the drain with hot, but not necessarily boiling, water to remove loose soap residue, but do not rely on hot water to clear grease or a substantial clog.
🔹 For minor buildup or odor, you can try baking soda followed by vinegar, but do not expect it to clear a deep clog and never use this method after a chemical drain cleaner.
🔹 Pull out and clean the P-trap.
🔹 Periodically run water through rarely used sinks and drains to keep their traps filled and prevent sewer gas from entering the room.

⚠️ And most importantly – never pour grease down the drain.
If the smell lingers or keeps coming back, it may point to a deeper clog, a venting issue, or another problem in the drain system.

Ben's Plumbing can inspect the system, identify the source of the odor, and recommend the right solution, including professional cleaning or a camera inspection when needed.

📞 Give us a call: +1 206-222-9297

https://bens.plumbing/services/drain-cleaning-seattle/

07/06/2026

Planning some landscaping, an addition, or noticing a mystery problem with your sewer? The first question is where your line actually runs. Some of this you can do yourself. The rest is better left to a pro. Let's break it down 👇

What you can do yourself:

🔹 Find the cleanout. It's a small capped pipe that connects to your main sewer line. You'll often spot it near the house, in the yard, or in the basement – and it's your biggest clue to which way the line runs.

🔹 Check your plans. If your home's paperwork includes a utility layout, compare it with what you see on the property.

🔹 Call 811 before you dig. This free service marks public utilities. Important: 811 does not typically mark private facilities on your property, including private sewer laterals, so those may require a private utility locator.

And here's where DIY ends ⚠️

❌ Don't run heavy equipment on a guess – one careless move with an excavator, and a damaged pipe turns into a costly repair.

❌ You can't pinpoint a buried line by eye. That takes the right gear: ground-penetrating radar (GPR), electronic locators, and sewer camera inspection.

Honestly? Precision takes a pro. GPR can typically locate a sewer line within about 6 inches of the pipe’s center, though accuracy can vary based on site conditions, surrounding materials, and pipe composition. More importantly, a professional locate protects you from accidental damage and unnecessary digging.

Planning a project or chasing down a "mystery" pipe? Give us a call – we'll locate your line accurately, with no guesswork 📞 +1 206-222-9297

Learn more about our sewer line locating service here: https://bens.plumbing/services/sewer-line-repair-seattle/locating-service/

07/03/2026

Leaky pipes don't stand a chance. ⚡
Our licensed plumbers show up ready to handle it – no mess, no stress, no runaround. From a dripping faucet to a full pipe repair, we get the job done right the first time.

✅ 24/7 emergency service
✅ Expert, background-checked technicians
✅ Fast, reliable solutions
✅ Residential & commercial

When plumbing problems hit, don't wait it out – call the team that treats your home like it's their own.
📞 206-222-9297
🌐 https://bens.plumbing/

06/24/2026

What Happens During a Sewer Line Video Inspection 🎥

Picture this: your drains are slow, the pipes are gurgling, and the cause is anyone's guess. Your sewer line is buried underground, so there's no way to eyeball it. Tear into walls and dig up the yard on a hunch? Nope. First, we simply take a look inside.

Here's how it works 👇
🔹 We feed a waterproof camera on a flexible rod into the pipe
🔹 It travels along the line and streams video in real time
🔹 The screen can reveal common sewer line issues, including clogs, cracks, tree roots, corrosion, and sagging pipe sections, also called bellies
🔹 The footage is saved, so the exact spot and cause of the problem are crystal clear

Why this matters for you:
✔️ No guesswork – we know precisely where the problem is
✔️ It's non-invasive: less needless digging and damage
✔️ Repairs are targeted, faster, and easier on your wallet
✔️ Sometimes the inspection shows everything's fine – and that's just peace of mind

A video inspection is often the first step before any major sewer decision. It's also a smart move before buying a home, so you know the condition of those underground pipes ahead of time. Seeing the real state of your system beats working blind every time.

Suspect something's off with your sewer? Give us a call – we'll take a look inside and tell you straight what's going on 📞 +1 206-222-9297

Learn more about our video inspection service here: https://bens.plumbing/services/sewer-line-repair-seattle/video-inspection/

05/25/2026

If your home was built before the 1980s in Seattle – chances are your sewer line is cast iron or clay. Both crack, corrode, and let tree roots in over time.

🚫 The old way: dig up your yard, your driveway, sometimes your basement. Days of mess, thousands in landscaping to redo afterward.

✅ The better way: Sewer Pipe Relining.

We insert a resin-coated liner into your existing pipe. It cures in place and creates a brand-new pipe inside the old one. No trenches. No torn-up lawn. Most jobs are done in a single day.

Works great for:
✔ Cracked cast iron lines
✔ Clay pipes with root intrusion
✔ Older homes in Capitol Hill, Ballard, Queen Anne, Wallingford
✔ Anyone who'd rather keep their yard intact

📞 +1 206-222-9297

https://bens.plumbing/services/sewer-line-repair-seattle/pipe-lining/

05/20/2026

Drain keeps clogging every few months? Here's why.

A traditional drain snake punches a hole through the blockage – water flows again, but the grease, sludge, and buildup are still stuck to the walls of your pipe. That's why the clog comes back.

Hydrojetting uses high-pressure water (up to 4,000 PSI) to scour the entire pipe wall clean. Grease, scale, roots, mineral buildup – gone. Your pipe looks like new on the inside.

When to choose Hydrojet:
✔ Recurring clogs in the same spot
✔ Multiple slow drains at once
✔ Kitchen lines with grease buildup
✔ Pre-inspection before selling your home

📞 +1 206-222-9297
Serving Seattle and the surrounding areas.

Learn more about our services here: https://bens.plumbing/services/drain-cleaning-seattle/hydro-jetting/

Address

1141 NW 53rd Street
Seattle, WA
98107

Telephone

+12062229297

Website

https://bens.plumbing/

Alerts

Be the first to know and let us send you an email when Ben's Plumbing, Heating and Air posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Ben's Plumbing, Heating and Air:

Want your business to be the top-listed contractor in Seattle?