What are the opening hours?

Monday 8am - 6pm Tuesday 8am - 6pm Wednesday 8am - 6pm Thursday 8am - 6pm Friday 8am - 6pm Saturday 8am - 6pm Sunday 8am - 6pm

CRV Metal Solutions

Home
United States
North Fort Myers, FL
CRV Metal Solutions

Call Directions Website Contact the business

Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from CRV Metal Solutions, Construction Company, 8923 N Fork Drive, North Fort Myers, FL.

10/14/2026

► BUSCHMANN PERFECT BENDER S-150

◆ SKU: 1030

◆ Features & Specifications

Bend Panels Right on the Roof

• Creates long bends without a sheet metal brake
• Bending depth adjusts from 1/4″ to 6″
• Forms bends up to 110°
• Designed to avoid scratching painted metal when bending past 90°
• Adjustable axle spacing accommodates different material thicknesses
• Stainless steel operating components resist corrosion
• 16 mm stainless steel guide rods
• Laser-etched inch scale for setting bend depth
• Lightweight enough for rooftop fabrication
• Capacity: 24ga steel, 26ga stainless steel, .040 aluminum, 20oz copper, and 1 mm zinc

◆ Order now at (239) 464-5662 or online at www.crvmetalsolutions .com

◆ Shipping available nationwide

10/13/2026

► BUSCHMANN ROLL CUTTER

◆ SKU: 0300

◆ Features & Specifications

Fast, Burr-Free Sheet Metal Cutting

Cut roofing panels and flat sheet up to 75 ft/min with clean edges ready to bend, hem, or install. The Buschmann Cutter runs off a standard cordless drill and features an integrated laser for precise cutting.

• Powered by a standard cordless drill
• Ideal for roofing panels, flashing, and flat sheet
• Finished edges are ready to bend, hem, or install
• Ships in a durable military-grade carrying case for storage and transport
• Weight – 7lbs

*Do not use impact drive or hammer drill mode while operating this burr-free metal cutting tool

Max Cutting Thickness:
Copper / Zinc / Alum – 20oz / .8mm / 0.032
Painted Steel – 24ga (.7mm)
Stainless Steel – 26ga (.5mm)

◆ Order now at (239) 464-5662 or online at www.crvmetalsolutions .com

◆ Shipping available nationwide

10/12/2026

► RAU 131 FINISHING TOOL LONG HANDLE

◆ SKU: 91171000

◆ Features & Specifications

Finish the Double Lock from a Standing Position

The RAU 131 Long-Handle Finish Seamer closes the second stage of a mechanical-lock standing seam to complete the double lock. Designed for long runs on low-slope roofs, the stand-up configuration reduces the need to remain bent over while manually finishing the seam.

• Used in conjunction with the RAU 111 or RAU 128.
• Good for long runs of low slope standing seam
• Adjustable handle with 3 height settings
• Extends to 29½”
• Works with 1″ and 1½” standing seams
• 8″ working width
• For painted/coated panels, consider the RAU1174.

◆ Order now at (239) 464-5662 or online at www.crvmetalsolutions .com

◆ Shipping available nationwide

10/09/2026

► RAU 128 FIRST LEG SEAMER LONG HANDLE

◆ SKU: 91101000

◆ Features & Specifications

Form the First Lock from a Standing Position

The RAU 128 Long-Handle First-Stage Seamer is the stand-up version of the RAU 111, designed to form the initial bend of a mechanical-lock standing seam on low-slope and flat roofs. Its long, adjustable handles provide additional leverage while reducing the need to work continuously in a bent-over position.

• Forms the first stage of a mechanical-lock standing seam
• Long handles provide additional leverage
• Adjustable handle length
• Designed for low-slope and flat roofs
• Seams profiles measuring 1″ or 1 /2″ high, ½” across the top
• Not preferred for painted panels due to the possibility of scratching
• Cannot be used for vertical seams.

◆ Order now at (239) 464-5662 or online at www.crvmetalsolutions .com

◆ Shipping available nationwide

10/08/2026

► RAU 127 SMALL SQUARESEAM FOLDER

◆ SKU: 91181000

◆ Features & Specifications

Compact Seaming for Curves & Tight Areas

The RAU 127 Small First-Stage Seamer is designed for forming the initial standing seam bend on curved and radius metal roofing panels. Its compact 8″ overall length and narrow 2¾” working width make it easier to maneuver around curved roofing details and in areas where larger hand seamers or power-seaming equipment cannot be used.

• Designed for first-stage seaming on curved standing seam panels
• Compact design for radius work and confined areas
• Normally the 2nd bend is not performed on curved conditions
• Useful where conventional seaming machinery cannot be positioned
• Can be used to lock panels together in windy conditions
• 8″ overall tool length
• 2¾” working width

◆ Order now at (239) 464-5662 or online at www.crvmetalsolutions .com

◆ Shipping available nationwide

10/07/2026

► RAU 119 LARGE SQUARESEAM FOLDER

◆ SKU: 91180000

◆ Features & Specifications

Form the First Lock on Curved Standing Seams

The RAU 119 Large First-Stage Seamer is designed for forming the initial standing seam lock on curved and radius metal roofing panels. Its narrow working width allows the tool to progressively follow curved profiles where conventional full-width hand seamers or power-seaming equipment may be difficult to use.

• Forms the first leg/stage of a standing seam on curved panels
• Normally the 2nd bend is not performed on curved conditions
• Ideal for radius and curved roofing details
• Useful where conventional seaming machinery cannot be used
• Can be used to help lock panels together during windy installation conditions
• Tool length: 13″
• Tool width: 2¾”

◆ Order now at (239) 464-5662 or online at www.crvmetalsolutions .com

◆ Shipping available nationwide

10/06/2026

► RAU 1174 W/ PVC FINISH HAND SEAMER

◆ SKU: 91174000

◆ Features & Specifications

Close Both Stages Without Scratching Painted Panels

The RAU 1174 is a professional 2-in-1 standing seam hand seamer designed to form both the first and second stages of a mechanical-lock seam. Unlike conventional steel-jaw seamers, the RAU 1174 uses replaceable PVC jaw inserts to help protect painted and coated metal panels from scratching during forming.

• Can be used for both 1st and 2nd stage mechanical lock seaming
• Used on seams that measure 1″ or 1 1/2″, and 1/2” across on the top leg
• Handle design allows hands to remain on the tool throughout the seaming process
• Tool Width – 8 1/2”
• Overall length – 17”
• Replaceable PVC jaw inserts available separately
• Professional German-made RAU roofing tool

◆ Order now at (239) 464-5662 or online at crvmetalsolutions .com

◆ Shipping available nationwide

10/05/2026

► RAU 117 STANDING SEAM FINISHING TOOL

◆ SKU: 91170000

◆ Features & Specifications

Complete the Second Stage of a Double-Lock Seam

The RAU 117 Finish Seamer completes the second stage of a double-lock standing seam in one operation. Designed for mechanical-lock profiles measuring ½” across the top leg, the tool allows the operator to progressively close the finished seam while keeping both hands comfortably positioned on the handles.

• Pair with the RAU 111 or RAU 128 for first-stage forming
• Designed for seams measuring ½” across the top leg
• Two-handle design keeps both hands on the tool while closing the seam
• Produces clean, consistent seams with less effort and greater speed
• Not preferred for painted material, as it can leave scratches. If using painted material consider the RAU1174.
• Compatible with up to 24-gauge steel, 20 oz. copper, and .036 aluminum.
• 8½” tool width covers more seam with each movement
• Overall length: 17″

◆ Order now at (239) 464-5662 or online at crvmetalsolutions com

◆ Shipping available nationwide

10/02/2026

► RAU 116 CRIMPING TOOL SMALL

◆ SKU: 91160000

◆ Features & Specifications

Create Watertight Pitch Transitions Without Cutting the Seam

The RAU 116 Small Crimping Tool is designed to form clean standing seam transitions where the pitch of a metal roof changes. Using a simple two-crimp method, the tool creates a traditional “pig’s ear” fold in the metal without cutting the seam.

• Designed for standing seam roof pitch transitions
• Forms the transition without cutting the standing seam
• Reduces the need to rely on sealant at the transition
• Helps maintain the water-shedding integrity of the seam
• 3″ blade length
• 13½” overall tool length
• Smaller companion to the RAU 115 Large Crimping Tool

◆ Order now at (239) 464-5662 or online at crvmetalsolutions .com

◆ Shipping available nationwide

10/01/2026

► RAU 115 CRIMPING TOOL LARGE

◆ SKU: 91150000

◆ Features & Specifications

Create Large, Crisp Pitch Transitions Without Cutting the Seam

The RAU 115 Large Crimping Tool is designed to create clean, watertight folds where the pitch of a standing seam metal roof changes. Using a two-crimp method, the tool forms a traditional “pig’s ear” transition without cutting the standing seam or relying on sealant.

• Designed for standing seam roof pitch transitions
• Forms transitions without cutting the standing seam
• Eliminates the need to rely on caulk or sealant at the fold
• Roof slope can be used to determine the required folding angle
• 9⅞” blade depth for large folds
• 27⅝” overall tool length
• Produces crisp, repeatable bends
• Layout drawing included

◆ Order now at (239) 464-5662 or online at crvmetalsolutions .com

◆ Shipping available nationwide

Address

8923 N Fork Drive
North Fort Myers, FL
33903

Opening Hours

Monday	8am - 6pm
Tuesday	8am - 6pm
Wednesday	8am - 6pm
Thursday	8am - 6pm
Friday	8am - 6pm
Saturday	8am - 6pm
Sunday	8am - 6pm

Telephone

+12394645662

Website

http://www.crvmetalsolutions.com/

Alerts

Be the first to know and let us send you an email when CRV Metal Solutions posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to CRV Metal Solutions:

Want your business to be the top-listed contractor in North Fort Myers?