Targa Homes

Seattle backyard cottage (DADU) builder with a focus on sustainability, comfort and efficiency.

09/28/2026

Bad decisions from neighborhood dog walks in the last couple weeks!

1- let's run siding super tight to the bottom of wall flashing so that any water behind siding cannot drain out
2- let's flash and install the windows before we've even framed the roof so everything gets nice and wet especially behind the flashing tape.

Tune in next time!! 🤦

05/29/2026

Last step on our roof assembly- fasten 1/2" plywood on top of foam with nails into the perimeter curb and 6" screws in the field. Now the roofers can come install their underlayment and prep for the standing seam metal roof!

05/21/2026

New website! My good friend spanked my old site and brought me into modern times. It looks great and has some great info on each project we've done to date. Link in bio or just targahomes.com!

05/13/2026

Next steps on this roof is laying 2 layers of GPS foam and then a top layer of plywood screwed through to structure underneath with 6" screws.

With our "L" curb detail, the first layer of 1-1/2" foam planes with the bottom 2x4, then the 2" layer brings it up flush with top of curb. 1/2" CDX plywood sandwiches it all together and provides backing for metal roof fastening.

This is not a true "monopoly" roof since we are not cleanly connecting the wall to roof seam. But the rigid insulation layer is purely continuous and will provide R-18 over the R-23 cavity for decades. Nice roof.

(Pics are a mix of detached garage and main roof)

05/08/2026

Matt reframed this dormer roof and now we have all the Adhero wrapped! On to the curb for insulation/roof drip edge. We went with a 2x4 "L" so that the outer face planes with the fascia but we still have a place to nail it on with backing underneath. We'll place a layer of 1.5" rigid foam first and then 2" foam will cover the bottom side of the L. You'll see.

05/06/2026

Little change of scenery as we assist on a remodel for my brother and sister in law on Lake Washington. The interior is fully gutted to the studs and we're doing a few interesting things with assemblies and systems to upgrade the comfort, efficiency, and indoor air quality of this home.

But first up, construct an over-framed unvented roof. This membrane provides the air barrier and "backup roof" underneath 3.5" of GPS foam up next.

My first time working with @475.supply
Ashero SA membrane but it went pretty well!

05/02/2026

We're cooking up something interesting on this quiet piece of land just outside Mill Creek. A 6 unit certified passive townhome project in conjunction with ! In design now, more to come!

Address

Milwaukee, WI

Website

http://www.targahomes.com/

Alerts

Be the first to know and let us send you an email when Targa Homes posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Targa Homes:

Want your business to be the top-listed contractor in Milwaukee?