Wentworth Flooring

06/19/2026

Hoover Elementary School here in Mason city went out with the old and in with the new . I get asked all the time why choose epoxy over LVT or carpet?

Heavy abuse and chemicals: Epoxy flake systems form a seamless, high‑hardness coating that shrugs off oil, solvents, disinfectants, and rolling loads better than most LVT wear layers. That’s valuable in maintenance shops, cafeterias back‑of‑house, science labs, and custodial closets.

Epoxy is also a sanitary surface. No tile seams means fewer dirt/water intrusion points and easier mop-and-disinfect routines in wet or spill-prone zones. Many flake systems add textured, anti‑slip topcoats and can be built for moisture-vapor tolerance.

Bottom line- choose epoxy flake over LVT in school areas that face frequent liquids/chemicals, need seamless sanitation, and take heavy rolling/impact loads.

Call today 641-512-4047

06/03/2026

When you drive into a garage, snow, ice, and salt melt off your vehicle and collect on the concrete surface.
There are several ways this can damage concrete:
Freeze-thaw damage
Saltwater penetrates tiny pores and cracks in the concrete.
When temperatures fluctuate, the water can freeze and expand.
Repeated freeze-thaw cycles can cause scaling, flaking, and surface deterioration.
Chemical attack
Some deicing salts, especially those containing calcium chloride or magnesium chloride, can react with compounds in the concrete.
These reactions can weaken the surface and accelerate deterioration over time.
Corrosion of reinforcement
If saltwater reaches embedded steel reinforcement, it can cause rust.
Rust expands as it forms, creating internal pressure that cracks and spalls the concrete.

Why epoxy coatings are often considered one of the best protections

Blocks salt pe*******on — Saltwater stays on the coating rather than soaking into the concrete.
Resists chemical exposure — Most automotive fluids, road salts, and household chemicals can be cleaned off without damaging the slab.
Reduces staining — Tire marks, rust stains, and salt residue are easier to remove.
Improves durability — Epoxy helps protect the surface from abrasion and wear.
Makes cleaning easier — Salt residue can be swept or mopped away instead of becoming embedded in the concrete.
Call today 641-512-4047

05/27/2026

05/02/2026

You need to repair concrete before applying epoxy because epoxy coatings bond best to a sound, clean, and stable surface. If the concrete is damaged, cracked, or deteriorating, the epoxy won't adhere properly and can fail prematurely.
Adhesion: Epoxy needs a solid, even surface to chemically bond. Cracks, spalling, or weak spots prevent proper bonding, leading to peeling or blistering.
Moisture in concrete can Damage concrete and allow moisture to migrate up from below. Trapped moisture under epoxy often causes bubbling or delamination.
Structural integrity-Epoxy won’t fix structural problems 💥 it’ll only mask them temporarily. Repairs ensure the base concrete can handle loads and wear.

Call today 641-512-4047

04/26/2026

Benefits of epoxy -Durability and Strength
Epoxy forms a tough, resilient coating that can handle heavy loads.
Ideal for garages where cars, bikes, or heavy tools are stored.
Resistant to cracking and chipping compared to standard concrete.

Call today 641-512-4047