MACH ONE Epoxy Floors of Fort Worth East

Directions Website Contact the business

MACH ONE Epoxy Floors of Fort Worth East Veteran-owned and operated business specializing in epoxy flooring and concrete coatings in Fort Worth.

MACH ONE® Epoxy Floors Fort Worth East is a Veteran-owned and operated business that installs epoxy floors for garages, warehouses, businesses, and more. Solid epoxy and epoxy flake flooring improve your concrete floor's stain and water resistance, durability, and appearance. Our epoxy floor contractors also offer polyurea and polyaspartic floor coating, concrete sealing, and repairs to extend the life of your concrete slab! As Veterans, we pride ourselves on incorporating core military principles like Service, Integrity, and Pride into every project, no matter the size or scope. The MACH ONE® team is excited to use our years of combined experience to provide you with the best concrete and epoxy flooring services in Fort Worth East, TX.

Have you been finding white, chalky residue along the bottom of your garage walls? That's efflorescence, or mineral salt...
10/20/2026

Have you been finding white, chalky residue along the bottom of your garage walls? That's efflorescence, or mineral salt left behind when moisture moves through concrete and dries on the surface.

MACH ONE crew didn't stop at the floor while transforming this 2-car garage. They coated the stem walls as well, the low strip of concrete where the wall meets the slab, to help keep that white residue from coming back.

This floor was finished with a 1/16-inch Smoke flake blend.

If the edges of your garage keep turning white, ask about the stem walls when you schedule your estimate at mach1epoxy.com

10/01/2026

Before and after! 👀🙌 Always fun to see the difference a finished floor makes!

Nobody plans to coat their garage floor twice.On a recent MACH ONE project, a two-car garage had been resurfaced with DI...
09/25/2026

Nobody plans to coat their garage floor twice.

On a recent MACH ONE project, a two-car garage had been resurfaced with DIY store-bought epoxy products. Over the years, the floor peeled up significantly.

If you're getting quotes on a floor that's already been coated once, ask what the contractor plans to do about the old coating before they price the new one. The answer tells you a lot about how the job will go.

Not sure what's on your floor? Schedule your consultation at mach1epoxy.com and we'll help you plan the best way forward.

09/24/2026

A little epoxy throwback! ✨ We loved how this one turned out, and honestly, we just really love doing epoxy floors. 😎

Before: A bare garage slab with nothing between the concrete and the moisture that naturally works its way up from below...
09/18/2026

Before: A bare garage slab with nothing between the concrete and the moisture that naturally works its way up from below.

After: A moisture barrier laid down first, then a Cabin Fever flake system and a polyaspartic top coat, installed by the MACH ONE crew.

The barrier is the part that never shows up in an after photo, but it's the reason the coating on top of it won't bubble or peel the way it can without one. Skip that step, and the finish is only as good as the slab's ability to stay dry underneath.

Schedule your garage floor estimate at mach1epoxy.com.

09/16/2026

⭐️⭐️⭐️⭐️⭐️ We love a five-star review!

A big thank you to our customer for the kind words and for trusting our crew with your epoxy floor. We appreciate you! 🙌

09/04/2026

Another epoxy floor complete, and we couldn’t be happier with how it turned out! ✨

Beautiful finish, clean results, and another job done right. A big thank you to our crew for the hard work and attention to detail! 👏

08/17/2026

A spotless new epoxy floor and a 5-star review to top it off. ⭐⭐⭐⭐⭐

Love hearing feedback like this from our clients! Huge shoutout to the crew for another clean, precise install.

🇺🇸 Veteran Owned | MACH ONE Epoxy Floors

These new homeowners in Norfolk, Virginia were looking for ways to make their house feel more like 'them.' The MACH ONE ...
08/11/2026

These new homeowners in Norfolk, Virginia were looking for ways to make their house feel more like 'them.' The MACH ONE crew installed a full epoxy flake system in a 1/4-inch Mushroom flake blend across the two-car garage, plus a concrete coating on the stem walls providing added protection.

Same square footage, completely different floor to drive into every day.

Concrete slabs release moisture from underneath long after they're poured, and that moisture can make epoxy coatings fai...
08/03/2026

Concrete slabs release moisture from underneath long after they're poured, and that moisture can make epoxy coatings fail if you don't prepare for it.

The MACH ONE crew started this garage floor project with a moisture v***r barrier, then installed a 1/4-inch Feather Gray flake blend and a polyaspartic top coat.

The barrier is one version of prep that never shows up in the after photos and often matters the most.

If your garage floor has ever bubbled or peeled, ask whether a v***r barrier was part of the original install.

Learn more about our concrete coating process: https://www.mach1epoxy.com/

Address

Services Available In:
Mansfield, TX
76063

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Website

Alerts

Be the first to know and let us send you an email when MACH ONE Epoxy Floors of Fort Worth East posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to MACH ONE Epoxy Floors of Fort Worth East:

Shortcuts

Share

Category