Shiloh Electrical Solutions LLC

Directions Contact the business

Shiloh Electrical Solutions LLC Specializing in new construction, remodels, add ons, troubleshooting..residential and commercial

Licensed master electrician, Licensed Electrical Contractor, Licensed Propane Service Technician…Fully Insured. Serving Casey, Russell, Pulaski, Adair, Lincoln, Boyle, Garrard, and Marion Counties.

02/01/2026

Some of the changes I mentioned earlier have been implemented.

We are now Shiloh Electrical Solutions LLC.

Also starting immediately is Service Fees. If we are coming on a troubleshooting call and your fix involves no needed parts and is completed in the first hour, then you will not be charged additionally. Basically, the service fee covers our fuel cost and one hour.

If we are coming to give an estimate, a consultation fee will be charged and taken off at the very end of the project completion. Please note…if we are providing estimates and quotes, we will not be discussing particulars of how the job will be completed until we are awarded the job. If we are not awarded the job, the consultation fee is non-refundable.

If we begin a job and during the process it is decided by the customer that they are going to finish themselves or get someone under the table to finish it, and it is necessary to call us back to correct mistakes or help pass inspections, we will gladly do so for a 10% increase on our normally charged rates, and a retainer fee of $100…..and the repairs and/or completion will be done to my standards. Don’t like it?? Then either let us finish from the get go or call someone else. Doesn’t matter to me.

There are a few other things coming, but they are currently not in place yet. Any questions, feel free to reach out.

01/18/2026

Some big changes coming at the end of the month. We will officially become Shiloh Electrical Solutions LLC. We are phasing out the propane side of things.

The cost of the liability and licensing is not worth the effort to continue taking new work. It’s just not profitable enough. We will still offer winter startups for folks that regularly use us.

Another big change coming is the way we do bigger jobs that require bids and pay structure on those jobs. While we try our best to help people out, we are a business and have to make money to operate. Some folks like to take advantage of our willingness to offer bargains and end up cutting us out and having their uncle Johnny Bob or their 12 Mennonite Brethren friends take over.

The rest will be announced in the near future. Thanks.

01/03/2026

Most times I don’t ever hear complaints about pricing on our work. But there are times you’ll encounter those that’ll nickel and dime you to death, or try to barter and haggle in spite of saving money. So I’ve researched across the nation and especially Kentucky on going rates in the electrical and propane job spectrum. Here’s what I found, which can be sourced for any doubters.

PAY RANGES

Electrical Apprentice/Helper: $18-$30/ hour

Propane Apprentice/Helper: $25-$40/hour

Journeyman Electrician: $31.25-$50/hour

Master Electrician: $50-$125/hour

Electrical Contractor: 5-20% of job cost

LLP Propane Tech: $50-$100/hour

Electrical New Construction per square foot: ($7.50-$10) (*Depending upon extras beyond code requirements*)

Electrical Construction Remodeling per square foot: ($10-$17) (*Depending on several factors*)

Service Entrance Cost: $10/amp-$15/amp

These prices are based on the current residential market in 2025.

Just a little comparison for any that we’ve done work for that wants to measure up what you were charged against what you could have been charged.

12/29/2025

I get this sometimes, and people are horribly confused on how it works.

“My (husband, uncle, friend, cousin….etc.) is going to do my wiring. Will you sign off on it when it’s inspected?”

First, if you’ve pulled a homeowner’s permit, it won’t do any good whatsoever to get someone to “sign off” on the job.

How it works is this: whoever pulls the permit is taking on the liability of that job. If it’s a homeowners permit, not only is the owner assuming liability…but by law they are the one required to do the work….not the half dozen Amish or Mennonite’s living down the road. If you get caught, it can get sticky.

The only other person besides a homeowner that is able to pull a permit is a licensed Electrical Contractor. And that contractor is required by the state to be associated with a Master Electrician (usually themselves) to supervise or perform the actual work.

So when you ask an electrical contractor to pull a permit, it is them who is liable. They are putting their license and liability insurance on the line. And according to State law, all electrical work done under a permit that requires inspection that is not a homeowner’s, requires supervision of that work by a master electrician.

Can you hire a licensed electricianor contractor to check over your work prior to inspection? Yes. Ive done it many times. But unless they pulled the permit, which requires them to at least supervise the work, they aren’t going to be liable.

And just so you’re aware, these inspectors arent stupid. Every one of them will tell you that they can pick out an electrician job over a homeowner or unlicensed job in mere seconds. You’re not going to fool them.

Just some FYI.

Address

Liberty, KY
42539

Website

Alerts

Be the first to know and let us send you an email when Shiloh Electrical Solutions LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Shiloh Electrical Solutions LLC:

Shortcuts

Share

Category