Its patented design allows it to sense the internal water temperature, ALLOWING NO WATER to drip until dropping below 37°F/3°C. Hand-tighten the Freeze Miser on to an outdoor faucet or hose.
2. Turn the water supply valve to a fully open position. A minimum of 10 PSI water pressure is required.
3. Install the Freeze Miser in a horizontal or vertical position. In the upright position, the small brass end should be at the bottom. Do NOT install the Freeze Miser with the brass end pointed upward.
4. If placing on a hose (150 feet or less) – Keep the Freeze Miser off the ground to ensure the Freeze Miser senses the water’s temperature only in the hose.
5. Expert Tip – Before the cold season starts, we recommend placing the Freeze Miser in a freezer for several hours. Then quickly place on an outdoor faucet and open fully. Water should discharge through the Freeze Miser, and the flow should stop in a short while. For additional installation information and videos visit: https://www.freezemiser.com/installation/
