Stat Restoration

Home
United States
Kalispell, MT
Stat Restoration

Stat Restoration has been in the Flathead Valley for over 30 years. Once everyone is safe, the road forward can feel overwhelming.

When fire, water, or disaster turns your life upside down, your first priority is protecting the people you love. That’s where Stat Restoration steps in. Based in Kalispell, Montana, Stat Restoration provides dependable, professional damage restoration services when you need them most. Available 24 hours a day, our team responds quickly to help stabilize your property and begin the recovery proces

s. Whether your home has been damaged by fire, flooding, mold, or the water used to extinguish a blaze, we have the experience and equipment to handle every phase of restoration. We understand that disaster doesn’t just damage buildings—it disrupts lives. That’s why we approach every project with urgency, care, and respect for the families we serve. With decades of combined experience and a reputation built on trust, our team is prepared to manage everything from water damage restoration and mold remediation to fire damage cleanup and biohazard services. From the moment you call, you can feel confident that your home is in capable hands. Stat Restoration is committed to restoring not just your property, but your peace of mind. If your home or business has suffered damage, contact Stat Restoration today at (406) 752-8040 to speak with a member of our team. For more information about our full range of restoration services, visit us online.

05/29/2026

All American Builders made this place look amazing. Check out the before and afters!

05/28/2026

How to Prevent Water Damage Before It Starts

Most major water losses start from small problems homeowners never noticed.

The good news?
👉 Many can be prevented.

🧠 The most common causes we see in Northwest Montana:

– Frozen pipes
– Failed water heaters
– Appliance supply line failures
– Slow leaks under sinks
– Drain backups
– Roof and window leaks

❄️ Winter tip (VERY important in Montana)

Frozen pipes are one of the biggest causes of water damage here.

To help prevent them:

– Keep heat consistent
– Open cabinet doors under sinks
– Let faucets drip during extreme cold
– Insulate exposed plumbing

💧 Check these regularly

– Water heater
– Washing machine hoses
– Refrigerator water lines
– Under sinks and around toilets
– Crawlspaces and basements

👉 Small leaks become BIG losses fast

⚠️ Warning signs homeowners miss

– Musty smells
– Bubbling paint
– Warped flooring
– Soft drywall
– Higher water bills

These can all point to hidden moisture.

🏔️ Local insight (Kalispell & Flathead Valley)

In Kalispell, Whitefish, and surrounding areas, seasonal temperature swings create a lot of preventable water losses.

👉 A quick inspection now can prevent a major mitigation job later.

📢 Bottom line:

Most water damage starts small
👉 Prevention and early detection save thousands

⏭️ Next in the series:
What to do in the FIRST 60 minutes after discovering water damage

📍 Serving Kalispell, Whitefish, Eureka, Columbia Falls, Libby, Troy
📞 406-752-8040
🌐 www.statrestore.com

💬 Questions? Drop them below—we’ll answer them in upcoming posts

05/20/2026

🚨 What Does Insurance Actually Cover? 🚨

One of the biggest misconceptions we hear is:
👉 “Insurance covers everything.”

Unfortunately… that’s not always true.

🧠 What insurance MAY cover

In many cases, insurance helps cover damage that is:

– Sudden
– Accidental
– Unexpected

Examples can include:

– Burst pipes
– Appliance failures
– Storm-related damage
– Sudden water leaks

⚠️ What insurance may NOT cover

Coverage can become limited when damage is caused by:

– Long-term leaks
– Neglect or lack of maintenance
– Ongoing moisture issues
– Delayed response

👉 Every policy is different

💧 Why mitigation matters

Insurance companies expect homeowners to:

– Act quickly
– Prevent further damage
– Mitigate the loss as soon as possible

Waiting too long can sometimes create coverage issues.

📸 Why documentation is critical

Proper documentation helps support your claim:

– Photos
– Moisture readings
– Damage reports
– Timeline of events

👉 This is why early mitigation matters so much

🤝 How we help

– We help document the loss properly
– We communicate with your adjuster
– We help keep the process organized
– We work WITH insurance from the beginning

🏔️ Local insight (Whitefish & Northwest Montana)

In Whitefish, Kalispell, and surrounding areas, frozen pipes and seasonal water losses are common.

👉 Fast response can make a major difference in both damage and coverage outcomes.

📢 Bottom line:

Insurance often covers sudden damage
👉 But fast action and proper documentation matter

⏭️ Next in the series:
How to prevent water damage before it starts

📍 Serving Whitefish, Kalispell, Eureka, Columbia Falls, Libby, Troy
📞 406-752-8040
🌐 www.statrestore.com

💬 Drop your questions below—we’ll answer them in upcoming posts

05/08/2026

🚨 How Much Does Mitigation Cost? 🚨

Let’s talk about the question everyone is thinking 👇

👉 “What is this going to cost me?”

🧠 The honest answer: it depends

Every job is different, but cost is based on:

– Type of damage (water, fire, mold)
– Size of the affected area
– How long the damage has been sitting
– Materials involved (carpet, drywall, hardwood, etc.)

💧 Typical ranges (just for perspective)

– Small water loss: lower cost
– Moderate damage: mid-range
– Large or complex loss: higher cost

👉 The biggest factor is how quickly it’s addressed

⚠️ What makes costs go UP

– Waiting too long to act
– Damage spreading into walls and flooring
– Mold growth
– More materials needing removal

👉 What keeps costs DOWN

– Fast response
– Immediate water extraction
– Proper drying and monitoring
– Early documentation and insurance involvement

🤝 What about insurance?

In many cases:

– Mitigation is covered under your claim
– It’s considered necessary to prevent further damage
– Proper documentation is key

👉 We help guide this process from the start

🏔️ Local insight (Eureka & Northwest Montana)

In Eureka, Kalispell, and surrounding areas, we often see:

– Costs increase when homeowners wait on insurance
– Smaller issues turn into bigger repairs

📢 Bottom line:

Faster response = lower cost

👉 The sooner you act, the more you save

⏭️ Next in the series:
What insurance actually covers (and what it doesn’t)

📍 Serving Eureka, Kalispell, Whitefish, Columbia Falls, Libby, Troy
📞 406-752-8040
🌐 www.statrestore.com

💬 Drop your questions below—we’ll answer them in upcoming posts

04/28/2026

🚨 How Long Does Mitigation Take? 🚨

One of the first questions we get is:
👉 “How long is this going to take?”

The answer depends on the situation—but here’s a real breakdown 👇

⏱️ Typical Mitigation Timeline

– Inspection & setup: same day
– Water extraction: same day
– Drying process: 3–5 days (average)
– Monitoring & adjustments: daily
– Final dry-out: usually within a week

🧠 What affects the timeline?

– How much water or damage there is
– How long it sat before being addressed
– Type of materials affected (carpet vs hardwood vs drywall)
– Temperature and airflow conditions

⚠️ What slows things down?

– Waiting to call for help
– Hidden moisture behind walls or floors
– Delays with insurance communication

👉 What speeds things up?

– Fast response and early extraction
– Proper equipment and monitoring
– Early insurance involvement (keeping everyone aligned)

🏔️ Local insight (Whitefish & Flathead Valley)

In Whitefish, Kalispell, and surrounding areas, colder temps and seasonal issues (like frozen pipes) can impact drying times.

That’s why proper equipment and monitoring matter.

📢 Bottom line:

Most mitigation jobs take 3–7 days
👉 But faster response = faster recovery

⏭️ Next in the series:
What mitigation costs (and what insurance covers)

📍 Serving Whitefish, Kalispell, Eureka, Columbia Falls, Libby, Troy
📞 406-752-8040
🌐 www.statrestore.com

💬 Drop your questions below—we’ll answer them in upcoming posts

04/24/2026

🚨 What Actually Happens During a Mitigation Job? 🚨

Most people don’t know what to expect when a mitigation company shows up.

Let’s break it down 👇

🧠 Step 1: Inspection & Assessment

– Identify the source of damage
– Check how far it has spread
– Determine what needs to be done

💧 Step 2: Stop, Contain & Extract

– Shut off or control the source
– Extract standing water immediately
– Prevent further spread
– Protect unaffected areas

👉 Fast extraction is critical to minimizing damage

📸 Step 3: Documentation & Insurance Coordination

– Photos of all damage
– Moisture readings
– Detailed reports

– Help start the insurance claim
– Communicate directly with your adjuster
– Keep everyone on the same page

👉 We involve insurance early to keep the process smooth from the start

🛠️ Step 4: Removal & Cleanup

– Remove damaged materials if needed
– Dispose of unsalvageable materials
– Clean affected surfaces

🌬️ Step 5: Drying & Stabilization

– Set up professional drying equipment
– Monitor moisture levels daily
– Ensure everything is fully dried

🏁 Step 6: Ready for Repairs

– Property is dry and stable
– Ready for rebuild or restoration

🏔️ Local insight (Kalispell & Flathead Valley)

In Kalispell, Whitefish, and surrounding areas, early extraction and early insurance involvement helps:

– Prevent delays
– Avoid confusion
– Keep claims moving smoothly

📢 Bottom line:

Mitigation is a step-by-step process
👉 And insurance is involved from the beginning—not the end

⏭️ Next in the series:
How long does mitigation take? (what to expect)

📍 Serving Kalispell, Whitefish, Eureka, Columbia Falls, Libby, Troy
📞 406-752-8040
🌐 www.statrestore.com

💬 Drop your questions below—we’ll answer them in upcoming posts

04/08/2026

🚨 Do You Call Insurance First… or Mitigation? 🚨

This applies to water, fire, mold, or any property damage.

Getting this wrong can cost you time, money, and more damage.

❓ The short answer:
👉 Call a mitigation company FIRST

⚠️ Here’s why:

– Insurance companies don’t stop the damage
– They don’t secure your property
– They don’t prevent things from getting worse

They handle the claim — not the emergency

⏱️ While you’re waiting…

– Damage is spreading
– It’s getting worse
– It’s getting more expensive to fix

👉 Time = damage

🧠 What you should do instead:

– Shut off the source (if possible)
– Call a mitigation company immediately
– Then call your insurance

🤝 How we work with your insurance

This is where a lot of people get stuck—we help with that too

– We document all damage properly
– We communicate directly with your adjuster
– We provide the reports and photos your claim needs
– We work within industry standards (Xactimate)
– We help keep your claim moving

👉 You’re not on your own in the process

⚠️ About “preferred vendors”

Your insurance may suggest a company

👉 You are NOT required to use them

You choose:
– Who comes into your home
– Who does the work
– Who you trust

🏔️ Local insight (Whitefish & Flathead Valley)

We see this all the time in Whitefish, Kalispell, and surrounding areas

People wait on insurance…
And by the time help arrives:

– Damage is worse
– Costs are higher
– Recovery takes longer

📢 Bottom line:

Mitigation stops the damage
Insurance handles the paperwork
👉 We help you with BOTH

⏭️ Next in the series:
The truth about preferred vendors (this one surprises people)

📍 Serving Whitefish, Kalispell, Eureka, Columbia Falls, Libby, Troy
📞 406-752-8040
🌐 www.statrestore.com

03/31/2026

Water Damage Doesn’t Wait — Here’s What Happens in the First 24–72 Hours

Last week, we talked about what mitigation is.
Now let’s talk about why speed matters so much.

⏱️ The First 24–72 Hours After Water Damage

🕒 0–24 Hours

Water spreads quickly into flooring, walls, and insulation.
Furniture and contents begin absorbing moisture.
The longer it sits, the more it soaks in.

🕒 24–48 Hours

Materials start breaking down.
Drywall softens, wood begins to warp.
Mold can begin forming.

🕒 48–72 Hours

Mold growth accelerates.
Odors begin to develop.
Damage becomes significantly more expensive to fix.

⚠️ Here’s the mistake most homeowners make:

They wait.

Sometimes it’s:

Waiting on insurance
Waiting to “see if it dries out”
Waiting until it looks worse

👉 By then, the damage has already spread.

🏔️ Local Insight (Kalispell & Flathead Valley)

We see this all the time in Kalispell, Whitefish, and surrounding areas—especially with:

Frozen pipes,
Appliance failures,
Slow leaks that go unnoticed.

The sooner mitigation starts, the more you save—plain and simple.

📢 What to do immediately:

✔️ Shut off the water source
✔️ Turn off power if needed (safe to do so)
✔️ Call a mitigation company right away

👉 Don’t wait on insurance to take action

⏭️ Next in the series:

We’ll answer a big one:
👉 Do you call insurance first or mitigation?

📍 Serving Kalispell, Eureka, Whitefish, Columbia Falls, Libby, Troy & surrounding areas
📞 406-752-8040
🌐 www.statrestore.com

💬 Have questions? Drop them below—we’ll answer them in future posts.

03/25/2026

🚨 New Education Series for Homeowners in Northwest Montana 🚨

Most people don’t think about water damage… until it’s too late.

Over the next several months, we’re launching a weekly (or bi-weekly) education series to help homeowners in Eureka, Kalispell, Whitefish, Columbia Falls, Libby, Troy, and surrounding areas understand:

💧 What to do when water damage happens
🕒 How fast damage spreads
📞 Who to call first (this surprises people)
⚠️ Mistakes that cost thousands
✔️ And how to protect your home and your insurance claim

🔍 Let’s start with the basics…

What is “mitigation”?

Mitigation is the process of stopping and preventing further damage after a water, fire, or mold event.

👉 It is NOT reconstruction
👉 It happens immediately after damage
👉 It’s the most important step in protecting your home

Think of it like this:

Mitigation = stopping the problem before it gets worse

That means:

Extracting water
Drying structure properly
Preventing mold growth
Documenting everything for insurance
⚠️ Why this matters

Water damage doesn’t sit still.

Within 24–48 hours, it can:

Soak into walls and insulation
Warp flooring
Start mold growth

The difference between acting fast and waiting even a day or two can be thousands of dollars in damage.

🏔️ Local matters

Here in Northwest Montana, we see this all the time—especially with:

Frozen pipes in winter
Appliance leaks
Flooding and drainage issues

Having a local mitigation company that can respond quickly makes all the difference.

📢 Follow along - This is just the beginning.

In our next post, we’ll break down:
👉 What actually happens in the first 24–72 hours after water damage

📍 Serving Eureka, Kalispell, Whitefish, Columbia Falls, Libby, Troy, and surrounding areas
📞 406-752-8040
🌐 www.statrestore.com

💬 Have questions? Drop them below—we may answer them in the next post.

02/27/2026

FROM KALISPELL TO EUREKA — WE SHOW UP.

Stat Restoration proudly serves Kalispell, Eureka, and all of Lincoln and Flathead County with 24/7 emergency response.

When water hits your floor…
When a pipe freezes and bursts…
When smoke or mold becomes a problem…

We move fast.

Our team is based in the Flathead Valley, but we actively serve the To***co Valley and surrounding communities every day. You’re not calling an out-of-state franchise — you’re calling a local Montana company that understands our weather, our homes, and our businesses.

Serving:
Kalispell
Whitefish
Columbia Falls
Eureka
Fortine
Rexford
All surrounding areas

Water. Fire. Mold. Full Restoration.

When disaster strikes — Call Stat. 406-752-8040

Address

2113 U.S. Highway 2 E
Kalispell, MT
59901

Telephone

+14067528040

Website

https://www.statrestore.com/

Alerts

Be the first to know and let us send you an email when Stat Restoration posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Want your business to be the top-listed Contractor in Kalispell?