Tube Tech Industrial Ltd

Tube Tech Industrial Ltd Heat exchanger, VCFE, Texas Tower, Shell Side, LNG Condenser, Flare Line combined cleaning

Tube tech International Inc's global reputation for achieving the highest return on investment after the removal of fouling from heat transfer assets is unparalleled, even in the world’s most challenging environments.

🔧 TubeTech™ cleaned 3,186 fouled tubes in a Philippine Texas Tower within five days, using bespoke remote cleaning techn...
08/11/2026

🔧 TubeTech™ cleaned 3,186 fouled tubes in a Philippine Texas Tower within five days, using bespoke remote cleaning technologies through narrow-access points. Click the link in the comments section to learn more.

💡 Restoring performance was essential after years of severe shell-side fouling, the most severe seen at the plant in ove...
07/14/2026

💡 Restoring performance was essential after years of severe shell-side fouling, the most severe seen at the plant in over 15 years. See how IGS TubeTech restored full heat transfer functionality while delivering zero safety incidents and on-schedule ex*****on. Click the link in the actions to learn more.

🛠️ TWISTED TUBE Heat Exchanger by Koch Heat Transfer was returned to bare metal after TubeTech™ applied a unique cleanin...
07/01/2026

🛠️ TWISTED TUBE Heat Exchanger by Koch Heat Transfer was returned to bare metal after TubeTech™ applied a unique cleaning technique to remove shell side fouling and tube side deposits that traditional methods could not. The bespoke technology travelled the full length of the cleaning lanes, removed deep blockages, and restored cleanliness where previous attempts had achieved only 20%. Click the link in the comments section to read the full case study.

Two VCFEs in the Middle East were expected to have light fouling but were found to be approximately 60% blocked after 16...
06/24/2026

Two VCFEs in the Middle East were expected to have light fouling but were found to be approximately 60% blocked after 16 years without cleaning. Using a new multi-drill system alongside simultaneous shell and tube side cleaning, TubeTech™ removed severe coke and deposit build-up across 7,712 tubes and restored the units for inspection. The project was completed within a tight timeframe using a combination of established and newly developed cleaning technologies. Click the link in the comments section to learn more.

🛠A Middle Eastern refinery required cleaning of both the shell and tube side of a TWISTED TUBE Heat Exchanger by Koch He...
06/17/2026

🛠A Middle Eastern refinery required cleaning of both the shell and tube side of a TWISTED TUBE Heat Exchanger by Koch Heat Transfer after performance had deteriorated 18 months after installation.

TubeTech™ designed a new bespoke cleaning technique that travelled the full length of the cleaning lanes and channels, removed blockages, and returned the TWISTED TUBE Heat Exchanger to bare metal. Click the link in the comments to learn more.

⚠️ One significant study finding revealed the underperformance of the convection coils, which hindered the unit from ach...
06/09/2026

⚠️ One significant study finding revealed the underperformance of the convection coils, which hindered the unit from achieving its desired efficiency and led to radiant inlet temperature (cross-over temperature) being way below the designed value. Over more than 20 years of operation, the convection coils, primarily consisting of finned tubes, suffered from increased fouling due to inadequate inspection and cleaning practices.
Click the link in the comments section to learn more.

🇵🇭 A Texas Tower in the Philippines hadn’t been cleaned since 2001, with 3,186 tubes heavily fouled and access limited t...
05/18/2026

🇵🇭 A Texas Tower in the Philippines hadn’t been cleaned since 2001, with 3,186 tubes heavily fouled and access limited to a 2-inch top nozzle and side manway. TubeTech™ completed the VCFE exchanger clean in just 5 days using bespoke remote cleaning systems, removing years of sludge, scale, and blockages ahead of the shutdown deadline. Click the link in the comments section to learn more.

🔥 One of the site’s most critical assets, a large-scale ethylene furnace, was suffering from performance inefficiencies ...
04/28/2026

🔥 One of the site’s most critical assets, a large-scale ethylene furnace, was suffering from performance inefficiencies traced back to years of unaddressed convection section fouling. This was causing thermal inefficiencies, elevated stack temperatures, and growing pressure to boost output without increasing fuel usage or emissions.
Click the link in the comments section to learn more.

04/16/2026

🔧Fouling in the convection section continues to limit SMR performance more than most expect, driving higher fuel use and lower heat transfer.
This case study shows how ROV cleaning during maintenance reduced hydrogen production cost by 2.6%, increased steam output by 20%, and lowered flue gas temperature by 58°C. Click the link in the comments section to learn more.

Address

6623 Willowbrook Park
Houston, TX
77066

Telephone

+18322861322

Website

Alerts

Be the first to know and let us send you an email when Tube Tech Industrial Ltd posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Tube Tech Industrial Ltd:

Shortcuts

Share

Category