Connatser Wood Floors, LLC

Connatser Wood Floors, LLC Sanding and finishing all types of hardwood floors and stairs, old and new with over 40 years experience.

This is a job i just finished up last week in Machipongo VA, it's 2,000 sq. ft. of random width hickory plank and a stai...
08/03/2026

This is a job i just finished up last week in Machipongo VA, it's 2,000 sq. ft. of random width hickory plank and a stairway. This one went natural with 3 coats of Glitsa finish that will dry to a satin sheen.

This is a job I did a few weeks ago in Easton MD. It's an upstairs apartment with white oak plank floor and a bakery dow...
08/03/2026

This is a job I did a few weeks ago in Easton MD. It's an upstairs apartment with white oak plank floor and a bakery downstairs with white oak herringbone floor. Both were sanded and finished with 3 coats of Glitsa finish. The finish is wet in the first few pictures, but dries to a satin sheen.

This is one I recently did near Denton, It's an older 2- 1/4 red oak floor in a kitchen and breakfast area that was worn...
05/29/2026

This is one I recently did near Denton, It's an older 2- 1/4 red oak floor in a kitchen and breakfast area that was worn and scratched up. I sanded it down and stained it back the original color, DuraSeal Sedona Red, and then applied 3 coats of Glitsa finish.

This is an old pine bedroom floor that I recently did in Wye Mills. The floor had some termite damage, broken boards and...
05/29/2026

This is an old pine bedroom floor that I recently did in Wye Mills. The floor had some termite damage, broken boards and nail holes that I had to epoxy and fill first, then I sanded them down and finished them natural with 3 coats of Glitsa finish.

This is a small repair done at the end of a room last week in Camden Delaware. I sanded and stained this area with a spe...
05/29/2026

This is a small repair done at the end of a room last week in Camden Delaware. I sanded and stained this area with a special mix of 3 different Minwax stains to match the old floor, then applied 3 coats of Glitsa finish. The 2 boards near the tape are the original color from 14 years ago that I had to match, glad I was able to find out the original mix that was used back then.

This is a small room I recently refinished in Rock Hall. The builder had patched an area with new floor and I sanded and...
04/01/2026

This is a small room I recently refinished in Rock Hall. The builder had patched an area with new floor and I sanded and finished the whole room. I had to try and match the color because this flooring was throughout the whole house. I sanded and stained the floor with Minwax Simply White stain, then applied 3 coats of Satin Glitsa finish over it. I never guarantee an exact match, especially when the floor is this old, but I think I got it pretty close. You can see the new and old in one picture where the door sill is.

This is a job I did recently in Annapolis (Eastport), it's part old and part new red oak floor and 3 stairways. I sanded...
03/11/2026

This is a job I did recently in Annapolis (Eastport), it's part old and part new red oak floor and 3 stairways. I sanded it down and applied a coat of Minwax Honey stain and 3 coats of Glitsa finish. The finish is wet in the pictures and will dry to a satin sheen.

This is a small job I just finished in Chestertown. It's a new yellow pine plank floor and stairs that I sanded and fin...
01/24/2026

This is a small job I just finished in Chestertown. It's a new yellow pine plank floor and stairs that I sanded and finished natural with three coats of Glitsa finish. The finish is still wet in the pictures and will dry to a satin sheen.

Address

204 N Academy Street
Greensboro, MD
21639

Telephone

+14107141740

Website

Alerts

Be the first to know and let us send you an email when Connatser Wood Floors, LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Connatser Wood Floors, LLC:

Shortcuts

Share

Category