Thermo International

Call Directions Website Contact the business

Thermo International Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Thermo International, 95 Bartley Flanders Road, Flanders, NJ.

Thermo International Services, a leading engineering group based in Flanders, NJ that provides state-of-the-art technology in induction heating and heat treatment products.

⚡🏗️ Big Parts? No Problem. 🏗️⚡Industrial components come in all shapes and sizes—and your induction heating equipment ne...
10/17/2026

⚡🏗️ Big Parts? No Problem. 🏗️⚡
Industrial components come in all shapes and sizes—and your induction heating equipment needs to be able to keep up.
At Thermo International, our induction heating systems are designed with an exceptionally wide tuning range. That means the same technology can be used for components ranging from very small parts to massive industrial assemblies weighing thousands of pounds.
The key is our wide-range load matching technology, which gives technicians the flexibility to adapt the system to different coils, loads, and applications.
Whether the job involves thermal expansion, shrink fitting, bearing installation, coupling removal, or other heavy industrial maintenance, our equipment is built to provide the power and flexibility needed in the field.
🔧 Small parts to extra-large components
⚡ Wide tuning range for greater versatility
🏭 Built for demanding industrial applications
🇺🇸 Designed and manufactured in the USA
One machine. More applications. Fewer limitations.
📞 973-970-9500
🌐 ThermoInternational.com

🔩 Need a Custom Bolt Heating Inductor—Fast?When a job calls for an unusual size, your crew needs a supplier who can resp...
10/16/2026

🔩 Need a Custom Bolt Heating Inductor—Fast?

When a job calls for an unusual size, your crew needs a supplier who can respond.

Thermo International manufactures all its bolt heating inductors in-house. We stock the components to build nearly any size or configuration, allowing us to build and ship custom inductor wands often in less than 24 hours.

Recently, for a forging press project, the customer needed two inductors with a 61 mm outside diameter and a 48-inch heated zone to support assembly and disassembly.

That’s why we keep manufacturing close: when you need a specific fit, we can get to work.

Tell us what your job requires. Send your bore dimensions, heated-length requirements and deadline. We’ll help determine the configuration and confirm turnaround.

📞 973-970-9500
🌐 ThermoInternational.com

⚡🔩 Your Turbine Outage Starts With Getting the Bolts Loose.Your crew is ready. Inspections and repairs are scheduled. Bu...
10/15/2026

⚡🔩 Your Turbine Outage Starts With Getting the Bolts Loose.

Your crew is ready. Inspections and repairs are scheduled. But first, those large turbine casing bolts need to come apart.

Thermo International’s portable induction bolt heating systems generate heat directly within the bolt, creating controlled expansion that helps relieve clamping load so crews can loosen nuts under the specified procedure.

Heating can take just minutes per bolt, depending on its dimensions, material and equipment setup.

For turbine maintenance teams, that can mean:

⚡ Shorter heating cycles to keep disassembly moving
🔩 Less reliance on excessive mechanical force
🎯 Localized heating that helps limit heat transfer into the casing
🔥 No open flame during heating

With the right setup and procedure, controlled heating can also help reduce the risk of damage associated with forceful removal.

Planning your next turbine outage? Send us your bolt dimensions, bore size, material and schedule. We’ll help match the machine and inductors to your job.

📞 973-970-9500
🌐 ThermoInternational.com

⚡ Turbine Bolts Today. Retaining Rings Tomorrow.As a turbine engineer, you know the work doesn’t end when the casing bol...
10/14/2026

⚡ Turbine Bolts Today. Retaining Rings Tomorrow.

As a turbine engineer, you know the work doesn’t end when the casing bolts come loose. The next task may involve a coupling, a hub or a generator retaining ring—and each brings different heating requirements.

Thermo International’s 120kW induction heating system gives your crew the flexibility to handle multiple applications with one power supply.

With the appropriate coils, inductors and setup, the same machine can support:

🔩 Large turbine bolt and nut heating
⚙️ Retaining ring removal and installation
🏭 Coupling, hub and bearing thermal expansion

Its wide tuning range accommodates different heating loads. Multiple input-voltage configurations—380, 400, 415, 480 or 575 volts—also help support projects at facilities around the world.

For maintenance teams, OEMs and field service crews, that means equipment you can plan around as the scope of work changes.

What’s on your next outage schedule? Send us your component dimensions, material and site power requirements. We’ll help match the machine and accessories to your work.

📞 973-970-9500
🌐 ThermoInternational.com

⚡ Better Induction Heating Starts With Better Cable Design.For demanding industrial jobs, the connection between your po...
10/13/2026

⚡ Better Induction Heating Starts With Better Cable Design.

For demanding industrial jobs, the connection between your power supply and coil matters.

Thermo International’s true coaxial cables are engineered for portable induction heating systems, supporting:

✔ Efficient power transfer with low energy loss
✔ Freedom to position the coil during operation
✔ Protection for components inside the power supply

Built in-house in Flanders, NJ, with the practical needs of turbine maintenance and industrial heating crews in mind.

Get the right cable for your next job. Talk with Thermo International.

📞 973-970-9500
🌐 www.ThermoIntl.com

⚡🔩 Keep Turbine Disassembly Moving. Put Induction Heat Inside the Bolt.Before inspections and repairs can begin, your cr...
10/12/2026

⚡🔩 Keep Turbine Disassembly Moving. Put Induction Heat Inside the Bolt.
Before inspections and repairs can begin, your crew needs access—and large turbine casing bolts can stand in the way.
Thermo International’s induction bolt heating systems generate heat directly within the bolt through a properly sized inductor positioned inside its center bore.
Rapid, controlled heating creates expansion to support nut loosening under the specified bolting procedure. A shorter heating cycle also gives heat less time to migrate into the surrounding turbine casing.
For turbine maintenance teams, that means:
🔩 Controlled expansion of large bolts and studs
⚡ Rapid, localized heating where it’s needed
🔥 No open flame
⏱️ Shorter heating cycles to help keep disassembly moving
The right setup depends on your bolt dimensions, bore size, material and required heating cycle. Matching the machine and inductor to the application starts before the outage.
Planning your next turbine outage? Send us your bolt specifications, photos or drawings, and schedule. We’ll help match the equipment to your job.
📞 973-970-9500
🌐 ThermoInternational.com/turbine-casing-bolt-removal

⚡🔩 Keep Turbine Disassembly Moving. Put Induction Heat Inside the Bolt.Before inspections and repairs can begin, your cr...
10/12/2026

⚡🔩 Keep Turbine Disassembly Moving. Put Induction Heat Inside the Bolt.

Before inspections and repairs can begin, your crew needs access—and large turbine casing bolts can stand in the way.

Thermo International’s induction bolt heating systems generate heat directly within the bolt through a properly sized inductor positioned inside its center bore.

Rapid, controlled heating creates expansion to support nut loosening under the specified bolting procedure. A shorter heating cycle also gives heat less time to migrate into the surrounding turbine casing.

For turbine maintenance teams, that means:

🔩 Controlled expansion of large bolts and studs
⚡ Rapid, localized heating where it’s needed
🔥 No open flame
⏱️ Shorter heating cycles to help keep disassembly moving

The right setup depends on your bolt dimensions, bore size, material and required heating cycle. Matching the machine and inductor to the application starts before the outage.

Planning your next turbine outage? Send us your bolt specifications, photos or drawings, and schedule. We’ll help match the equipment to your job.

📞 973-970-9500
🌐 ThermoInternational.com/turbine-casing-bolt-removal

⚡ Built for the Tough Jobs in Power GenerationWhen you’re working on large turbines, generators, fans, and blowers, havi...
10/11/2026

⚡ Built for the Tough Jobs in Power Generation
When you’re working on large turbines, generators, fans, and blowers, having the right induction heating equipment can make a difficult job a whole lot easier.
At Thermo International, we design and manufacture our induction heating machines and accessories right here at our New Jersey facility.
That includes the machines, true coaxial cables, custom coils, and accessories used by OEMs, turbine service companies, and maintenance teams for jobs such as:
⚙️ Retaining ring heating and removal
🔥 Coupling removal
🔧 Fan and blower hub heating
🔩 Turbine bolt and nut heating
🏭 Other thermal expansion applications
Because we build the system ourselves, we know how every component is designed to work together. And when a customer comes to us with an unusual application, our team can help develop the right setup for the job.
We don’t just build induction heating machines. We build complete systems for the real-world challenges our customers face in the field.
📞 973-970-9500
🌐 ThermoInternational.com

👨‍🏭⚡ Expert Training Comes Standard with Thermo International⚡👨‍🏭Buying new induction heating equipment is just the begi...
10/10/2026

👨‍🏭⚡ Expert Training Comes Standard with Thermo International⚡👨‍🏭
Buying new induction heating equipment is just the beginning. Knowing how to get the most from it is what makes the difference.
At Thermo International, we don't just build industry-leading portable induction heating systems—we make sure our customers know how to use them with confidence.
If you're new to our equipment, we can send one of our experienced technicians to your facility for hands-on training, including:
✅ Proper machine setup and testing
✅ Equipment maintenance and preventive care
✅ Load tuning for maximum performance
✅ Troubleshooting and best operating practices
Our goal is simple: help your team work safely, efficiently, and confidently from day one.
When you own a Thermo International induction heating system, you're backed by more than great equipment—you receive knowledgeable technical support from people who understand your applications.
📞 973-970-9500
🌐 Thermo International

⚡🔩 Turbine Outage? Put the Heat Where It’s Needed—Inside the Bolt.When you’re removing large turbine casing bolts, heati...
10/09/2026

⚡🔩 Turbine Outage? Put the Heat Where It’s Needed—Inside the Bolt.

When you’re removing large turbine casing bolts, heating speed and control matter.

Many turbine bolts have a center bore designed for conventional electric resistance heaters. Thermo International’s induction bolt heating systems use a properly sized inductor in that same bore to generate heat directly within the bolt.

Rapid heating creates the expansion needed for loosening under the specified bolting procedure, while giving heat less time to migrate into the surrounding turbine casing.

For turbine maintenance engineers, that means:

🔩 Controlled expansion of large bolts and studs
⚡ Rapid, localized heating
🔥 No open flame
⏱️ Shorter heating cycles to help keep disassembly moving

Planning your next turbine outage? Send us your bolt dimensions, bore size, material and schedule. We’ll help match the machine and inductors to your job.

📞 973-970-9500
🌐 ThermoInternational.com

Address

95 Bartley Flanders Road
Flanders, NJ
07836

Opening Hours

Monday 8am - 4pm
Tuesday 8am - 4pm
Wednesday 8am - 4pm
Thursday 8am - 4pm
Friday 8am - 4pm

Telephone

+19739709500

Website

Alerts

Be the first to know and let us send you an email when Thermo International posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Thermo International:

Shortcuts

Share