Grace Technologies

09/02/2026

💧 How much can change between cooling tower inspections?

Performance losses don’t always show up as obvious failures. Changes in efficiency, energy use, water use, and cooling capacity can develop gradually between inspections.

This week’s HumpDay Blog explores why continuous cooling tower condition monitoring can provide a clearer picture of performance over time, especially as cooling demands grow.

👉 Read the full blog: https://hubs.li/Q04wn70g0


https://hubs.li/Q04wn70g0

08/26/2026

Electrical safety and equipment reliability are becoming harder to separate. NFPA 70E 2027 creates a clearer connection between condition of maintenance and NFPA 70B.

Our latest HumpDay Blog breaks down how the two standards work together and what that connection means in practice.

💡 Read the full blog: https://hubs.li/Q04vqVmx0


https://hubs.li/Q04vqVmx0

08/25/2026

"How can it do BOTH?" 🤔

Good question, Les!

⚡ LED indicators show when voltage is present
🔌 Built-in test points let you verify with your own meter, no need to open the door

One device, one 30mm knockout, and safer lockout/tagout for your whole team. That's closed-door voltage verification with ChekVolt.

Learn more: https://hubs.li/Q04v8ynS0

08/19/2026

As power demands climb, switchgear and distribution equipment face higher loads, changing fault-current conditions, and greater consequences when critical equipment fails.

Our latest blog explores what rising rack densities mean for data center electrical infrastructure and what facilities teams should have on their radar.

👉 Read the full blog: https://hubs.li/Q04tBT_L0


https://hubs.li/Q04tBT_L0

Rising data center rack density creates new electrical risks for switchgear. See how AI loads, fault current and equipment lead times are raising the stakes.

08/17/2026

Periodic inspections tell you how your equipment was doing on inspection day. Continuous thermal monitoring tells you how it's doing right now, watching critical connections 24/7 and alarming the moment thermal risk develops. Sorry, Burnie, the switchgear's covered:https://hubs.li/Q04sd8HG0

08/14/2026

Equipment failures rarely come without warning, the warning just goes unheard.

GraceSense™ Machine Health Monitoring catches faults early and tells your team what's wrong in plain language, no vibration analyst needed.

Pilot it on your own equipment for $5,000, backed by a 90-day Love It or Return It guarantee: https://hubs.li/Q04sdH6K0

08/13/2026

Most near misses never get reported. The Proxxi Band catches them in real time: wearable alerts as workers approach live voltage, plus a dashboard that shows safety managers where the risks actually are.https://hubs.li/Q04sdw6Q0

08/12/2026

The 2027 edition of NFPA 70E is here. Is your Electrical Safety Program ready?

It introduces important updates to energized electrical work, testing, PPE, battery systems, emerging technologies, and equipment maintenance.

This week, we're breaking down the key changes and what electrical safety teams should have on their radar.

⚡ Read the full blog: https://hubs.li/Q04sQwp60


https://hubs.li/Q04sQwp60

The 2027 edition of NFPA 70E introduces important changes to energized work, testing, PPE, batteries, solar systems, and maintenance. Here's what your electrical safety program should review now.

08/11/2026

Over 1000 VDC on mining vehicles? The ChekVolt® 3KV's built-in 10:1 divider lets a standard voltmeter verify absence of voltage from outside the enclosure. Proven to save 30-45 minutes per LOTO.

Learn more: https://hubs.li/Q04sdqHY0

08/10/2026

NEW: The GraceSense™ Hot Spot Monitor 600 brings continuous thermal monitoring to low-voltage equipment. Instead of waiting for the next IR inspection, the HSM 600 tracks temperature rise 24/7 and alarms the moment thermal risk develops, helping you catch faults early and support NFPA 70B compliance. Scalable to 78 monitored points from a single network module.

See how it works: https://hubs.li/Q04sd8qJ0