Honeybadger Woodworks LLC

09/08/2026

Yes, I know there are nails in the wood. Cutting wood containing metal can be dangerous and can damage a blade, cause kickback, or send debris flying. I’m using an old blade that I’m willing to sacrifice, and I’m taking precautions based on the material, equipment, and situation. This isn’t something I recommend trying unless you understand the risks and know how to work around them safely.

09/06/2026

Free wood is everywhere if you know where to look. I break down old pallets, pull the nails, clean up the boards, and turn what most people consider trash into usable lumber. It takes a little work, but you can’t beat the price.

09/03/2026

Rebuilding these 138-year-old shutters means drilling a LOT of holes in exactly the right place. Instead of measuring and marking every single one, I made a simple jig that makes the process faster, easier, and repeatable.

08/31/2026

These old shutters were too far gone to simply repair, so I’m rebuilding the frames while saving as much of the original material as possible. They’ve survived well over a century, so throwing them away wasn’t an option. One step closer to bringing these old shutters back to life!

08/28/2026

Build a saw station from trash

The Torsion Box Build : https://youtu.be/vz6-b7LDC0oOften Mentio...

08/27/2026

I made a LEGO table because apparently stepping on them wasn’t enough of an experience.

08/26/2026

Steam Bending Wood

08/25/2026

Why Buy Blast Gates When You Can Make Them?

08/25/2026

Not your regular cutting board

08/24/2026

Making A Cat Tower from tree branches