Tower and Turbine Technologies LLC

01/04/2024

Safety Alert on Gear

⚠ GRILLON SAFETY ALERT ⚠
Petzl requests that you inspect GRILLON products manufactured between October and December 2023, following detection of ropes which were incorrectly installed in the rope adjuster of recently produced GRILLON products. In such a case, the product does not perform its blocking function, which can result in a risk of injury.

Please immediately stop sales and use of GRILLON products manufactured in October, November and December 2023 and follow the inspection procedure described in the link in the comment section.

If you know others who possess or use GRILLON products, we ask you to kindly share this important information with them. We apologize for the inconvenience caused and remain available to provide any further information you may need.

07/25/2023

Great facility!! Real height training and rescue.

06/08/2023

The unmanned aerial system ecosystem came together yesterday at the NATE 2023 UAS EXPO at Valmont headquarters and fairgrounds in Valley, NE. More than 125 people attended the second year […]

03/16/2023

We are Hiring!!
If you know someone that would be a good fit for our Dallas Training position, please share this with them!
https://mailchi.mp/202efa479e19/become-a-safety-lms-instructor-6264849

01/31/2023

Equipment and Safety Info..

Huber+Suhner has issued an urgent notification not to use pre-laced hoisting grips installed on all Masterline Classic Hybrid 12x24 cable that came attached to the hybrid cable when reels were delivered to installers or may be…

12/22/2022

Safety Recall....

www.rockexotica.com/omni-recall
Rock Exotica has issued a recall notice on all 1.1” Omni Block Pulleys and associated variants manufactured from February 2020 through October 2022.
For full details please visit the link above

12/13/2022

Cool stuff!

11/25/2022

BLACK FRIDAY SALE
20% OFF ALL ONLINE COURSES!!!
Nov 23-27
Visit safetylms.com today to lock in your savings

11/19/2022

Safety First!!

Material fatigue is normal.
Recently in Berlin I was discussing fatigue with my good friends Hannes and Jakob at Rock Exotica Germany and looking at stress/strain curves during cyclic loading. One thing is clear, plastic deformation, which is irreversible damage, begins at about 50% of the 3sigma MBS of an aluminium carabiner. This is why many of us state that you should never exceed 25% of the MBS during use. If you knowingly do this then you should remove the carabiner from service and destroy it. At least one reputable and well-known manufacturer actually prints this in their instructions.
Put simply, you should never load a 22kN carabiner beyond 5.5kN.

09/15/2022

President of SafetyLMS and Tower and Turbine Technologies LLC, JP Jones, takes the Commissioner and other to the top!!