Laser Engravers

Laser Engravers Provides any type of CNC laser cutting on MS, Hardox, brass, Stainless Steel

10/08/2026

High-Efficiency Batch Machining:

From 3D CAD Simulation to Multi-Part CNC Milling ⚙️💻

​In precision component manufacturing, batch production requires accurate toolpath programming, rigid fixture setup, and synchronized multi-component milling routines.

​At LASERS ENGRAVERS PVT LTD, we streamline production from digital CAD model to physical metal parts. This video highlights our full engineering workflow:

​CAD/CAM Simulation: Toolpath generation and multi-axis trajectory planning in Creo Parametric.

​Batch Fixtures Setup: Rigid 4-block clamping setup on the CNC bed for maximum vibration stability.

​High-Speed Milling & Drilling: Simultaneous pocketing, hole drilling, and contour finishing across 4 parts in a single cycle.
​By optimizing multi-part toolpaths, we significantly reduce cycle times, minimize unit production costs, and maintain tight dimensional tolerances for our clients. 🇵🇰

​💼 Looking for an engineering partner for custom die components, batch milling, or prototype manufacturing in Karachi? DM us or share your technical drawings today!

​

30/07/2026

Surgical Precision in Action: High-Speed Fiber Laser Slotting & Hole Array Fabrication ⚙️⚡

​In heavy sheet metal fabrication, achieving clean edge profiles and exact hole centerlines without heat distortion is essential for fast downstream assembly.

​This video highlights our CNC Fiber Laser cutting heavy-gauge steel sheets with extreme accuracy—executing intricate slot paths and tight hole patterns with zero burr formation.

​Why Choose Our Fiber Laser Services:

✅ Micron-Level Tolerance: Flawless hole concentricity and slot alignment for seamless fitment.
✅ Clean Edge Ex*****on: Superior gas-assisted cutting that eliminates the need for manual deburring.
✅ High Volume Efficiency: Optimized CNC nesting to reduce material waste and cycle times.

​At LASERS ENGRAVERS PVT LTD, we provide end-to-end industrial sheet metal cutting, CNC routing, and custom die manufacturing under one roof in Karachi. 🇵🇰

​💼 Need rapid turnaround times and precision for your next production batch? Direct message us or send your technical CAD drawings today!

​

24/07/2026

CAD-to-Steel Precision: Fabrication of a 25mm Mild Steel Punching Stamp for Gas Stove Embossing ⚙️🔥

​In heavy sheet metal branding, producing a high-impact punching die requires exact CAD/CAM modeling, precise draft angles, and high-rigidity CNC toolpaths.

​Here is a glimpse of our manufacturing workflow at LASERS ENGRAVERS PVT LTD, where we engineered a custom 25mm Mild Steel (MS) Punching Stamp for "super PAK GAS STOVE".

​Key Production Stages:

✅ 3D CAD/CAM Design: Precision modeling in Creo Parametric to ensure optimal lettering depth and draft angle for clean sheet metal deformation.

✅ Heavy-Duty Clamping & Machining: Securing a solid 25mm MS block on our CNC setup to eliminate spindle vibration.

✅ Micro End-Milling: Using fine carbide cutters with continuous lubrication to achieve sharp text contours and smooth relief surfaces.
​This high-durability stamp is built to withstand thousands of high-pressure press cycles without losing edge sharpness.

​💼 Looking for custom dies, industrial embossing stamps, or specialized CNC machining in Karachi? DM us or connect to discuss your project requirements! 🇵🇰

​

22/07/2026

High-Precision Fiber Laser Cutting for Commercial Lighting Solutions: 1.5mm CR Sheet Metal Fabrication ⚡💡

In the commercial lighting and electrical industry, precise mounting holes, thermal dissipation vents, and sharp corner tolerances are crucial for seamless fixture assembly.

Here is a glimpse of our production floor at LASERS ENGRAVERS PVT LTD, where we are processing 1.5mm Cold Rolled (CR) sheets to fabricate custom SMD Light Housing Panels.
Using advanced CNC Fiber Laser technology, we achieve:

✅ Micron-Level Tolerance: Precise hole arrays for LED drivers, heat sinks, and structural mountings.
✅ Burr-Free Edges: Smooth, clean cuts that require zero secondary grinding—ready for immediate bending and powder coating.
✅ Rapid Bulk Output: Optimized nesting routines that significantly reduce per-unit production costs and cycle times.

From indoor commercial SMD lights to heavy-duty outdoor industrial enclosures, we provide complete sheet metal engineering under one roof in Karachi. 🇵🇰

💼 Looking for an OEM manufacturing partner for your lighting, electrical, or structural sheet metal needs? Drop us a line or DM us your CAD blueprints to get started!

21/07/2026

From Raw CAD Concept to Flawless 3D Finish:

Complete Tyre Tread Mold Precision Machining ⚙️🏎️

A few days ago, we shared the initial roughing phase of this complex Tyre Tread Mold. Today, we are proud to showcase the fully finished, high-precision die, engineered and machined entirely at LASERS ENGRAVERS PVT LTD.

Machining deep, repeating 3D tread patterns with intricate siping channels requires extreme toolpath accuracy, continuous spindle load control, and flawless cooling synchronization to lock in exact tolerances.

Key Technical Milestones Achieved:

✅ Complex 3D Contour Milling: Surgical accuracy on multi-angled rubber tread blocks and side lugs.
✅ Micro-Texturing & Detail: Deep center-line channel engraving with zero burr formation.
✅ Mirror-Grade Finish: Smooth cavity surfaces ensuring effortless mold release during high-pressure rubber vulcanization.

By delivering end-to-end mold & die manufacturing under one roof in Karachi, we help our clients maintain tight production deadlines with zero compromise on quality. 🇵🇰

💼 Need custom molds, dies, or specialized CNC machining for your manufacturing facility? Let’s connect or DM us your technical drawings!

18/07/2026

Defense-Grade Engineering at its Best! 🇵🇰⚓

Take a look at these custom-built Dual-Screen Aluminum Consoles, specially engineered and manufactured for the Pakistan Navy. Built from high-grade aluminum, these rugged and durable enclosures are designed to house critical defense electronics and communication systems under demanding environments.

From precision CNC fabrication and robust hardware assembly to a flawless premium matte finish, our team at Lasers Engravers Pvt Ltd ensures that every unit meets strict defense and industrial quality protocols.

💼 Our Core Capabilities:
Custom Industrial & Defense Console Fabrication
Precision Sheet Metal Engineering (Aluminum, Steel & Stainless Steel).High-End CNC Machining & Specialized Coatings.

www.lasersengraverspvtltd.pk

📞 Contact us to discuss your manufacturing specifications: +92 332 3905847

16/07/2026

Crafting Details out of Wood! 🪵✨

Watch our high-speed CNC Router carve clean typography and intricate brand logos directly onto wood. From initial design coordinates to the final polished finish, the level of precision we achieve ensures sharp edges and premium depth every single time.

This specific project was done for Bilal Traders and Ammunition Dealer, bringing their brand identity to life with top-tier engraving.

💼 Our Core Services:
Precision Wood Carving & 3D Engraving
Custom Signs & Branding Boards
Heavy-Duty CNC Milling & Mold Making

🌐www.lasersengraverspvtltd.pk

📞 Get custom engraving for your brand: +92 332 3905847

13/07/2026

From Blueprint to High-Grade Aluminum! 🛠️⚡

Take a behind-the-scenes look at our complete Mold Fabrication process. This video captures the journey of transforming a massive 120mm Aluminum block into a precision industrial mold.

Watch the perfect synergy between automated technology and skilled craftsmanship—from heavy-duty CNC milling to manual bending, professional welding, and flawless finishing.

Aluminum offers the perfect balance of lightweight efficiency and high thermal conductivity, making it ideal for high-performance molds. At Lasers Engravers Pvt Ltd, we engineer accuracy into every single millimeter.

💼 What We Offer:
High-End Aluminum Mold Design & Fabrication
Precision VMC & CNC Machining (Up to Heavy-Block Milling) Custom Industrial Metal Fabrication & Welding.

🌐 Visit our website: www.lasersengraverspvtltd.pk

📞 Discuss your manufacturing needs with us: +92 332 3905847

Address

Plot SA 04 33/C Korangi Near Old KESC Office
Karachi
74000

Opening Hours

Monday 08:30 - 17:00
Tuesday 08:30 - 17:00
Wednesday 08:30 - 17:00
Thursday 08:30 - 17:00
Friday 08:30 - 17:00
Saturday 08:30 - 17:00

Telephone

+923323905847

Website

Alerts

Be the first to know and let us send you an email when Laser Engravers posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Laser Engravers:

Shortcuts

Share