Buildrite Construction Chemicals Hub Lipa

Buildrite Construction Chemicals Hub Lipa Operated by Mitflor Soluxon Construction Supplies Trading
For Inquiries and Purchase Order Contact Us at
0917 1172 194
Email: [email protected]

Owned and Operated by Mitflor Soluxon Construction Supplies Trading - Lipa

Not All Tile Adhesives Are the Same — Here’s What You Should KnowChoosing the wrong tile adhesive can compromise the qua...
03/09/2026

Not All Tile Adhesives Are the Same — Here’s What You Should Know

Choosing the wrong tile adhesive can compromise the quality, durability, and performance of your installation, leading to tile failure, safety risks, and unnecessary costs. Tile adhesives are specially formulated to bond with specific materials like earthenware, porcelain, large format and they are designed to perform optimally in different environments and applications. The right adhesive prevents damage, improves durability, enhances performance, speeds up installation, and ensures cost-effectiveness.

BUILDRITE SMARTBOND FLEX is a high-performance flexible tile adhesive and shear stress dampener that absorbs movement between tiles and substrates, preventing debonding even in challenging conditions.

To ensure optimal performance across different tile formats and applications, BUILDRITE offers a range of SMARTBOND FLEX variants:
SmartBond Flex Silver – For ceramic and earthenware tiles
SmartBond Flex Gold – For granite and porcelain tiles
SmartBond Flex Diamond – For large-format tiles
SmartBond Flex Wall – For wall tile applications
SmartBond Flex Hydro – For wet areas and underwater applications

Need quick repairs before the year ends? We’ve got the solution!Ready-mix concrete (RMC) is produced in a batch plant ac...
02/09/2026

Need quick repairs before the year ends? We’ve got the solution!

Ready-mix concrete (RMC) is produced in a batch plant according to specific job requirements and delivered
to the site "ready to use." It’s ideal for construction projects where mixing concrete on-site isn’t feasible.

For small to medium projects, the cost and time associated with hiring mixing equipment, labor, and purchasing and storing raw materials—along with the environmental concerns of cement dust—may make ready-mixed concrete a far more cost-effective and practical solution.

BUILDRITE READYCRETE is a ready-mix concrete in a bag that can achieve 4,000 to 6,000 psi of compressive strength. You just need to add the right amount of water and mix for 10 minutes. It is recommended for small to medium projects that cannot order RMC due to minimum order quantity (MOQ), or for job sites that are inaccessible to RMC trucks. It can also be used for footings, pedestals, columns, beams, slab repairs, retaining walls, and more.

Cracked or washed out grouts could lead to water seepage underneath the tiles. Regular grouts tend to absorb moisture, e...
01/09/2026

Cracked or washed out grouts could lead to water seepage underneath the tiles.

Regular grouts tend to absorb moisture, especially in bathrooms and shower areas, where water is always present. Even steam creates enough moisture to find its way into the porous grout. If water found its way underneath the tiles can cause growth of mold and bacteria, insect infestation, and kapak or tile debonding.

To prevent this, we recommend Buildrite's TILE SEAL, a waterproof tile grout designed to prevent water seepage on grouts. It has a strong water-resistant capability that prevents water absorption, preventing the formation of molds and mildew.

TILE SEAL is a waterproof tile grout designed to prevent water seepage on grouts. It has a strong water-resistance and flexibility that prevents water absorption and cracking. It also has anti-bacterial and anti-fungus materials to prevent the growth of molds and mildew.

Tile Seal conforms with the European Standards. It falls under cg2 rating or cementitious grout with improved performance.

Today we honor the courage and resilience of the heroes who shaped our nation—and while we celebrate their legacy, our s...
31/08/2026

Today we honor the courage and resilience of the heroes who shaped our nation—and while we celebrate their legacy, our store remains open today to support all your construction needs. Happy National Heroes Day!

Do you find concrete finish floors attractive?Achieving a polished concrete finish typically involves various techniques...
29/08/2026

Do you find concrete finish floors attractive?

Achieving a polished concrete finish typically involves various techniques, from mixing and troweling a fresh slab to grinding, finishing, and polishing after it has cured. While traditional floor polishing delivers excellent results, what if there were a faster and more efficient way to achieve the same polished finish?

BUILDRITE has the solution. By simply applying a sealer directly to your concrete floor, you can instantly achieve your desired gloss or matte finish—no need for labor-intensive polishing.

Introducing FLOORTEK S and FLOORTEK SM: film-forming sealers that enhance both the aesthetics and durability of your concrete floors. These sealers act as a protective layer, shielding your floors from stains, scratches, dust formation, and weather-related damage, effectively extending their lifespan. Additionally, they are non-yellowing and resistant to film cracking.

Epoxy Anchors or Chemical Anchors create a bond between the anchor and the concrete. The key-lock effect is achieved bec...
28/08/2026

Epoxy Anchors or Chemical Anchors create a bond between the anchor and the concrete. The key-lock effect is achieved because the epoxy flows into the irregularities of the drilled hole and around the anchor, then it hardens to create a mechanical interlock. This, combined with the chemical bond of the epoxy, creates a very strong connection that can resist both pull-out and shear forces. This is why epoxy anchors are often used in high-strength applications, such as securing heavy equipment or structural elements.

BUILDRITE CONFIX ANCHOR is a high-strength and non-shrink chemical anchor. The epoxy is caulked inside the drilled hole, completely filling the space while covering the entire bolt. Using a chemical anchoring system, any length of the rod can be embedded into the hole to increase the load capacity or pull-out strength.

Notice those voids or cavities in hardened concrete? That’s honeycomb—a defect caused by poor compaction or incomplete f...
27/08/2026

Notice those voids or cavities in hardened concrete? That’s honeycomb—a defect caused by poor compaction or incomplete formwork filling. It weakens structural integrity and allows water to pe*****te, leading to reinforcement corrosion and other durability issues.

The long-lasting solution is BUILDRITE SOLIDCURE. Its high flowability fills even the tightest voids, while its non-shrink formula ensures a solid, durable repair. With up to 8,000 psi compressive strength, it’s ideal for structural grouting, base plate foundations, and restoring honeycombed or spalled concrete—making construction fast, reliable, and long-lasting.

The inability to waterproof the exterior can stem from various challenges. Sometimes barriers like landscaping, neighbor...
26/08/2026

The inability to waterproof the exterior can stem from various challenges. Sometimes barriers like landscaping, neighboring properties, or budget constraints make it impractical or impossible. In such cases, interior waterproofing becomes a viable alternative to safeguard your home.

BUILDRITE FLEXOR is a two-component, flexible cementitious waterproofing system that can withstand negative side pressure and movements of above-ground structures. It is recommended for mid-rise to high-rise buildings or for houses that are difficult to waterproof outside.

Is slippery tiles a problem for you?Areas that often get wet—like showers, bathrooms, kitchens, laundry areas, and walkw...
25/08/2026

Is slippery tiles a problem for you?

Areas that often get wet—like showers, bathrooms, kitchens, laundry areas, and walkways—can pose serious slip hazards. Slips and falls are a real concern, especially in high-traffic or frequently wet spaces.

BUILDRITE STOPSLIP Tiles is designed to enhance safety in these environments. This durable, non-slip coating provides superior grip while preserving the aesthetic integrity of your floors. Perfect for both commercial and residential applications, STOPSLIP offers long-term performance, easy application, and minimal maintenance.

REPAIR CONCRETE SPALLING AND CONCRETE SLAB DAMAGE FROM BECOMING MAJOR FAILURESConcrete spalling, scaling, delamination, ...
24/08/2026

REPAIR CONCRETE SPALLING AND CONCRETE SLAB DAMAGE FROM BECOMING MAJOR FAILURES

Concrete spalling, scaling, delamination, and slab deterioration can erode structural integrity, lead to rebar corrosion, and pose safety hazards in buildings, bridges, parking decks, and walkways. Faced with vertical concrete damage such as chipping, flaking, and peeling, or horizontal slab damage like pitting, cracking, and surface loss, owners and engineers often struggle to find durable, long-lasting repair solutions. Without proper bonding, patching can quickly delaminate; without effective crack injection, the repair won’t integrate with the existing structure.

The solution lies in using a tailored multi-product system that addresses both bonding and structural repair: CONFIX CONCRETE EPOXY HV, a high-viscosity epoxy bonding agent ideal for vertical repair, bonding old and new concrete and CONCRETE PATCH V, a non-sag repair mortar for vertical spalled surfaces, form the vertical repair duo. For floor and slab pe*******on and substrate consolidation, CONFIX CONCRETE EPOXY LV, a low-viscosity, deep-penetrating epoxy ensures superior adhesion and stress transfer. For full-depth reinstatement of damaged pavements, HARDCRETE 310/510/610 a cementitious high-strength repair mortar rated 3,000 psi, 5000 psi, and 6,000 psi, restores slab geometry and durability. Applied together in a sequenced process — epoxy priming, mortar patching, crack injection, and full-depth resurfacing — these systems combat spalling and slab damage effectively, ensuring a strong, long-lasting concrete repair.

Address

Purok 6, Brgy. Lodlod
Lipa City
4217

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm
Saturday 8am - 5pm

Website

Alerts

Be the first to know and let us send you an email when Buildrite Construction Chemicals Hub Lipa posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category