Fxco Finishes

Fxco Finishes Quality paint production
Wall screeding. General wall painting. Decorative Paintings. P.o.p celling, furniture & TV con

06/09/2026

An extraordinary design that will always make a passerby turn and look twice.

Lets make your exterior stand out with this quality weathershield paint design.!

Happy new week to us all



28/08/2026

this should be the most beautiful exterior paint for exterior finishings, In terms of beuty I don't think graffiato comes close.

if there is a perfect quality wall skimming, why should we prime ?Is it a waste of resources ?Is there a noticeable dif...
17/08/2026

if there is a perfect quality wall skimming, why should we prime ?

Is it a waste of resources ?

Is there a noticeable difference between a primed and primed surface after painting?

may we have a productive week ahead

Wishing us all a fruitful and productive week ahead 🙏
10/08/2026

Wishing us all a fruitful and productive week ahead 🙏


09/08/2026

The rainy season have been slowing the exterior delivering of this project for some times now but we are on it...

it will come out great as usual

this is a gravitex paint finish, one of the multipurpose finishes in the painting industry. it gives your wall a protective and decorative finish at the same time.

the ecstatics is unmatched..

10 years warranty

stay tuned



Wishing us all a fruitful august!
01/08/2026

Wishing us all a fruitful august!

Behind every captivating finishing, A wholept of work have been done on the background...New week blessings to us all ...
27/07/2026

Behind every captivating finishing,
A wholept of work have been done on the background...
New week blessings to us all


Not every peeling paint is caused by roof leakages or rising damp.Most people blame paint failures on water leakages or ...
25/07/2026

Not every peeling paint is caused by roof leakages or rising damp.
Most people blame paint failures on water leakages or poor damp-proofing, and while those are common causes, they are not the only ones.
As someone who has spent years in home finishing and project management, I've seen another major culprit that is often ignored: the type of sand used for plastering.
In many parts of Nigeria, a type of plaster sand commonly called mud sand is widely used. It contains a high percentage of clay. Contractors often prefer it because it:
Reduces cement consumption.
Makes plastering easier and faster.
Produces a smooth-looking finish at the early stage.
To reduce the clay content, it is usually mixed with sharp sand. However, mixing it does not completely remove the effects of excessive clay.
Over time, walls plastered with high-clay sand are more likely to experience problems such as: • Paint peeling. • Cracking. • Weak adhesion of finishes. • Frequent wall maintenance.
Unfortunately, when these defects appear, the blame often falls on the painter or screeder, or people assume inferior materials were used. In many cases, the real problem started much earlier—during the plastering stage.
The foundation of every beautiful finish is a quality plaster.
If you're building or supervising a project, be intentional about the sand used for plastering. Spending a little more on quality materials today can save you from repeated maintenance costs tomorrow.
As professionals, we may benefit from maintenance jobs, but I'd rather see homeowners build right the first time than keep spending money fixing avoidable problems.

share your thoughts

Build once. Build right. — Fxco Paints &
Finishes


A few years ago, I supervised the remodeling of a residential building in my area.The first complaint from the property ...
19/07/2026

A few years ago, I supervised the remodeling of a residential building in my area.
The first complaint from the property owner was that tenants consistently undervalued the apartments when negotiating rent.
Interestingly, it wasn't because the building was old. In fact, it was less than six years old.
The major issue was poor space planning by the builder. The layout didn't make the best use of the available space. Secondly, the choice of paint and finishing materials—both inside and outside the building—made the property appear older than it actually was.
As a home finishing expert, I believe every design should be created to stand the test of time.
Not every trendy design ages well. Some concepts look outdated within just five years. While the world of design keeps evolving, a well-planned finish should never look old-fashioned after only a few years.
A timeless design isn't always the most expensive or the most sophisticated. In many cases, simple, elegant, and well-executed finishes remain attractive and modern for 15–20 years.
To architects and engineers, my advice is this: involve professional interior and exterior finishing experts early in the design process. Our input can help ensure that the completed building remains visually appealing, functional, and valuable for many years.
Good engineering gives a building strength. Great finishing gives it lasting beauty. When both work together, homeowners enjoy a property that retains its value and continues to attract quality tenants long into the future.

Address

Okpuno Awka

Telephone

+2348167033833

Website

Alerts

Be the first to know and let us send you an email when Fxco Finishes posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share