Ohm Engineering Works

27/08/2026

𝐔𝐏𝐒 𝐁𝐚𝐜𝐤𝐮𝐩 𝐋𝐚𝐬𝐭𝐬 𝐋𝐞𝐬𝐬? 𝐁𝐚𝐭𝐭𝐞𝐫𝐲 𝐀𝐮𝐝𝐢𝐭 𝐈𝐬 𝐎𝐯𝐞𝐫𝐝𝐮𝐞

Your UPS may show 100% charge, yet deliver only a fraction of its expected backup.
Battery health cannot be judged from the UPS display alone—capacity gradually declines with age, temperature, charging conditions, and operating history.

🔋 What Can Reduce UPS Backup:

- Battery ageing and capacity loss
- High operating temperature
- Unequal battery voltages in the string
- Loose or corroded battery terminals
- Excessive discharge cycles
- Incorrect charging conditions

⚠️ Warning Signs To Watch:

- Backup time dropping unexpectedly
- Batteries heating during operation
- Frequent low-battery alarms
- Large voltage differences between batteries
- UPS switching to bypass or shutdown during outages

🔎 What A Battery Audit Should Check:

- Individual battery voltage and condition
- Terminal connections and corrosion
- Battery temperature
- Float/charging voltage
- Battery bank condition and age
- Capacity or discharge performance where applicable

🛠️ Ohm Engineering Works Insight:
A UPS is only as reliable as the battery bank supporting it.
Replacing batteries based purely on age—or waiting until the UPS fails—can both be costly. Battery condition should be measured and trended.

Test the battery. Know the capacity. Trust the backup.

26/08/2026

⚡ ഓണം ആശംസകൾ | Powering Progress, Engineering Excellence

This Onam, we celebrate the spirit of prosperity, togetherness and new beginnings. 🌼

At Ohm Engineering Works, we believe every strong foundation begins with the right electrical engineering.

From HT/LT Systems & Installation to Control Panels, Testing & Commissioning, Power Quality and Electrical Project Solutions — we engineer solutions that keep businesses powered, protected and performing.

🌾 May this Onam bring prosperity, success and endless possibilities to you and your business.

Ohm Engineering Works

Engineered Solutions for Electric Excellence.

📲 Follow us: Power DNA | Ohm Engineering Works

ElectricalEngineering ElectricalContractor ElectricalSolutions HTLT PowerQuality TestingAndCommissioning ElectricalProjects Bangalore Kerala TamilNadu

26/08/2026

21/08/2026

⚡ Your machine may not be the problem. Your power supply might be.

Voltage fluctuations. Harmonics. Power surges. Poor distribution.

These invisible electrical problems can quietly lead to equipment failures, downtime, energy losses and reduced equipment life.

At Ohm Engineering Works, we take electrical projects from designing to ex*****on.

🏠 Residential
 

🏢 Commercial
 

🏭 Industrial

Design → Supply → Ex*****on → Testing & Commissioning → Support

Don't wait for an electrical failure to reveal the problem.

Engineer it right. Execute it right. Power it right.

📞 9600181272
📩 [email protected]
🌐 www.ohmengineeringworks.com

19/08/2026

𝐅𝐫𝐞𝐪𝐮𝐞𝐧𝐭 𝐕𝐅𝐃 𝐅𝐚𝐢𝐥𝐮𝐫𝐞𝐬? 𝐂𝐚𝐛𝐥𝐢𝐧𝐠 𝐚𝐧𝐝 𝐄𝐚𝐫𝐭𝐡𝐢𝐧𝐠 𝐀𝐫𝐞 𝐓𝐡𝐞 𝐂𝐚𝐮𝐬𝐞

A VFD that keeps failing is not always a VFD problem.
In many installations, incorrect motor cabling, poor shielding, inadequate earthing, or improper cable routing can expose the drive and motor to electrical stress.

⚠️ What Poor VFD Cabling Can Cause:

- Excessive electrical noise and interference
- Reflected-wave stress on motor insulation
- Bearing currents and premature bearing damage
- Nuisance trips and repeated drive faults

🔎 Common Installation Issues:

- Incorrect cable type or inadequate shielding
- Long motor cable runs without considering manufacturer limits
- Poor termination of cable shields
- Power and control cables routed too closely together
- Inadequate or improperly connected protective earthing

🛠️ What Should Be Checked:

- VFD-to-motor cable selection and length
- Shielding and gland termination
- Protective earth continuity
- Cable routing and segregation
- VFD parameters and fault history
- Motor insulation and bearing condition

⚡ Ohm Engineering Works Insight:
Replacing a failed VFD without checking the installation can simply repeat the same failure.
The drive, cable, motor, and earthing system must be treated as one complete system.

Correct cabling. Proper earthing. Reliable VFD operation.

17/08/2026

Earthing is not an optional electrical accessory. It is a critical part of the protection system. ⚡

A proper earthing system helps provide a controlled path for fault current and works together with protective devices to reduce the risk of electric shock, equipment damage and electrical fire.

Don't assume your earthing is good because an earth wire is present. Test and verify it.

15/08/2026

🇮🇳 Freedom Then. Powering Tomorrow. ⚡

Celebrating freedom. Powering progress. Building a stronger India. 🇮🇳⚡

Happy Independence Day!

13/08/2026

Being a solo consultant doesn't mean doing everything yourself.

It means knowing what only you can do, what can be delegated, and what can wait.
My weekly system is simple:
Prioritize → Design → Execute → Follow up → Close → Reset
The goal isn't to make every hour productive.
It's to make sure the important work gets done consistently.

Karthikeyan | Ohm Engineering Works
Electrical Consulting • Design • Ex*****on • Reliability

13/08/2026

Being a solo consultant doesn't mean doing everything yourself.

It means knowing what only you can do, what can be delegated, and what can wait.

My weekly system is simple:

Prioritize → Design → Execute → Follow up → Close → Reset

The goal isn't to make every hour productive.

It's to make sure the important work gets done consistently.

Karthikeyan | Ohm Engineering Works

Electrical Consulting • Design • Ex*****on • Reliability