Moschell Construction Pvt Ltd

13/08/2026

For residential houses and villas, these are the most useful styles to know:

⭐️ Modern Architecture
Clean lines, flat roofs, glass, simple geometry

⭐️Contemporary Architecture
Mixed materials, unusual forms, large glazing

⭐️Neo-Classical Architecture
Classical elements with cleaner modern proportions

⭐️Classical Architecture
Columns, arches, cornices, symmetry

⭐️Minimalist Architecture
Very clean forms, fewer materials, no ornamentation

⭐️Mediterranean Architecture
Stucco, arches, balconies, warm colours

05/08/2026

Do you own a plot ?

We are the Design and Build company,
Call now +91 79-06621221 (save upto 5 lakhs)

Minimum plot size 200

01/08/2026

For residential construction, brickwork quality directly affects the strength, durability, and finish of the building. Here is a practical site checklist that an architect, engineer, or site supervisor should follow.

⭐️Brick Quality

* Bricks should be of the approved class (usually first-class bricks).
* Uniform size, shape, and color.
* Well-burnt, with sharp edges and no cracks.
* Free from efflorescence (white salt deposits).
* Water absorption should not exceed about 20% by weight.

⭐️Brick Soaking

* Bricks should be soaked in clean water for 1–2 hours before laying.
* They should be damp but not dripping wet when used.

⭐️Mortar

* Use the specified mix (commonly 1:6 cement:sand for residential walls unless otherwise specified).
* Sand should be clean and free from silt.
* Mortar should be mixed fresh and used within about 30–40 minutes.

⭐️Wall Alignment

* Check verticality with a plumb bob.
* Check level using a spirit level.
* Ensure walls are perfectly straight using string lines.
* Verify room dimensions as per the drawings.

⭐️Joint Thickness

* Horizontal joints: about 10 mm.
* Vertical joints: about 10 mm.
* Joints should be completely filled with mortar.

⭐️Bonding

* Maintain proper brick bond (usually English bond or Stretcher bond as specified).
* Vertical joints should not continue in the same line.
* Use full bricks as much as possible.
* Avoid excessive brick bats (broken bricks).

⭐️Junctions

* Properly interlock brickwork at wall junctions.
* Use toothed joints instead of straight joints wherever possible.
* Ensure proper bonding with RCC columns using wall ties or anchors.

⭐️Daily Height

* Do not raise brickwork more than approximately 1.2–1.5 m in a day to prevent settlement.

⭐️Curing

* Start curing after 24 hours.
* Cure continuously for at least 7 days.

⭐️Final Checks

* Check wall thickness (115 mm, 230 mm, etc.) as per drawings.
* Verify all dimensions before proceeding.
* Ensure no honeycombing or gaps in joints.
* Confirm electrical boxes and concealed pipe positions.
* Check diagonal measurements to ensure rooms are square.

23/07/2026

How to make your duplex house more stylish ?

⭐️ Staircase Design

The staircase is a major design feature.

* Place it centrally for easy access.
* Use comfortable step dimensions.
* Allow natural light around the staircase.
* Make it an architectural highlight rather than just a functional element.

⭐️ Black frame windows

* Choose slim aluminum frames for a premium, contemporary appearance.
* Use floor-to-ceiling windows in the living room to maximize natural light.
* Combine black frames with white textured paint, natural stone, wood-finish HPL, or corten steel accents for a high-end façade.
* Maintain consistency by using the same frame color throughout the house.

⭐️ Main stylish Door

Ideal Door Size

* Height: 8–10 ft
* Width: 4–6 ft (single pivot door) or 6–8 ft (double door)
* A taller door creates a grand first impression, especially if your home has a double-height entrance.

⭐️ Large windows

A bright home feels larger and more luxurious.

* Use large windows and sliding doors.
* Add skylights over the staircase.
* Create double-height spaces where possible.
* Position rooms to capture the best daylight.

16/07/2026

Which is your favourite Element for facade ?

15/07/2026

10/07/2026

We work for home

09/07/2026

The biggest construction failures are rarely visible after concrete is poured.

Once a beam is cast, you can't see whether:

⭐️The reinforcement was placed correctly.
⭐️The concrete cover was maintained.
⭐️The stirrup spacing was right.
⭐️The lap lengths were adequate.
⭐️The beam-column junction was detailed properly.
⭐️The bars shifted during concreting.

That's why professional builders and engineers spend more time inspecting reinforcement before concreting than fixing problems after it.
Remember:

A strong building isn't created by using more steel or more concrete.
It's created by getting the details right.

03/07/2026

Hello from Moschell Construction 🦺

02/07/2026

Presentation A new project - A beautiful Residential project designed by Moschell Team

Area - 1.5 Acres
Client - Krixton Developers
Scope - Architectural Designing and construction