Guru G Construction & Architect Designer

25/08/2026

📍 DAY 8/100 — STEEL REINFORCEMENT

🏗️ 100 DAYS CONSTRUCTION TIPS SERIES | ZERO TO FINISH

🚨 Steel mein chhoti si galti, structure ki strength par bada asar daal sakti hai!

Concrete ko strength dene wali backbone hai Steel Reinforcement. Lekin sirf steel laga dena kaafi nahi — sahi bar diameter, cutting, bending, spacing, lap length, binding aur concrete cover sab drawing ke according hona zaroori hai.

✅ Approved quality ka steel use karein
✅ Bar diameter aur spacing drawing se verify karein
✅ Proper cutting aur bending karein
✅ Lap length sahi rakhein
✅ Cover blocks zaroor use karein
✅ Binding tight rakhein
✅ Concreting se pehle final inspection karein

💡 GURU G EXPERT TIP:
“Right Steel + Right Spacing + Right Cover = Strong Structure.”
Concreting ke baad galti sudharna mushkil hota hai, isliye reinforcement ko pehle hi properly check karein.

📌 SAVE THIS POST — construction ke time ye checklist bahut kaam aayegi.
📲 SHARE karo kisi aise person ke saath jo ghar banwa raha hai.

🏠 Plot se Foundation, Structure, Finishing aur Interior tak — har din ek nayi practical tip!

👇 Agar aap chahte hain ki construction ki har stage ki genuine knowledge mile, to Guru G Construction ko Follow karein.

25/08/2026

18/08/2026

📍 DAY 7/100 — COLUMN LAYOUT & MARKING

🏗️ 100 DAYS CONSTRUCTION TIPS SERIES | ZERO TO FINISH

🚨 Column ki position mein chhoti si galti, poori building ke alignment ko affect kar sakti hai!

Foundation ke baad column marking sirf measurement ka kaam nahi hai. Center line, dimensions, 90° squareness, level aur exact column position ko drawing ke according verify karna zaroori hai.

✅ Drawing se center line match karein
✅ Dimensions aur offsets verify karein
✅ 90° squareness check karein
✅ Column size & position re-check karein
✅ Level/elevation confirm karein
✅ Concrete se pehle final inspection karayein

💡 GURU G EXPERT TIP:
“Marking ek baar karo, checking do baar.”
Concrete se pehle column position ko re-check karna future structural problems aur costly rework se bachne mein help karta hai.

📌 SAVE THIS POST — column work ke time ye checklist kaam aayegi.
📲 Ghar banwa rahe kisi friend/family member ko SHARE zaroor karo.

🏠 Plot se Final Finishing tak — har din ek nayi practical construction tip.

👇 Comment mein “COLUMN” likho agar aapko next construction tip chahiye.

17/08/2026

🏗️ 100 DAYS CONSTRUCTION TIPS SERIES | ZERO TO FINISH

📍 DAY 6/100 — PCC (PLAIN CEMENT CONCRETE)

🚨 Foundation ke neeche PCC ko ignore karna chhoti saving lag sakti hai, lekin base ki quality par bada impact pad sakta hai!

PCC foundation ke neeche ek clean, level aur uniform base banane mein help karta hai. Isse foundation work ke liye proper surface preparation milti hai aur soil ke direct contact ko reduce karne mein madad milti hai.

💡 GURU G EXPERT TIP:
PCC se pehle surface ki cleaning, level, dimensions aur thickness properly check karna zaroori hai. Foundation ka next step tabhi start karein jab PCC inspection complete ho.

📌 SAVE THIS POST — foundation banate waqt ye checklist kaam aa sakti hai.
📲 SHARE karo kisi aise person ke saath jo ghar banwa raha hai.

🏠 Plot se Final Finishing tak — har din ek nayi practical construction tip.

👇 Comment mein “PCC” likho agar aapko foundation ki aur important tips chahiye.

17/08/2026

16/08/2026

16/08/2026

🏗️ 100 DAYS CONSTRUCTION TIPS SERIES | ZERO TO FINISH

🚨 Foundation ki khudai mein ek chhoti si galti… baad mein bahut mehengi pad sakti hai!

Ghar ki foundation sirf “zameen khodna” nahi hai.
Sahi depth + sahi level + soil condition + proper checking = strong foundation. 🏠

⚠️ Excavation start karne se pehle:
✅ Drawing ke according marking check karein
✅ Required depth verify karein
✅ Bottom level properly check karein
✅ Loose soil ko identify karein
✅ Water logging ho to dewatering karein
✅ PCC se pehle engineer/site supervisor se verification karayein

💡 GURU G EXPERT TIP:
Foundation ki depth guess se nahi, structural drawing aur actual site/soil condition ke according decide honi chahiye.

📌 SAVE THIS POST — foundation work start hone se pehle kaam aayega.
📲 SHARE karo kisi aise person ke saath jo ghar banane wala hai.

🏗️ Zero se Finish tak — har din ek practical construction tip.

Aapke ghar ki foundation mein sabse pehle kya check karna chahiye?
Comment mein “FOUNDATION” likho 👇

15/08/2026

Wordrobe

15/08/2026

Elevation

15/08/2026

📍 DAY 4/100 — SITE LAYOUT & SETTING OUT
🇮🇳 HAPPY INDEPENDENCE DAY 🇮🇳

🏗️ 100 DAYS CONSTRUCTION TIPS SERIES | ZERO TO FINISH

Sahi shuruaat = Perfect Nirman! 🏠

Ghar banane se pehle site par boundary, direction, dimensions, grid lines aur levels ki accurate marking bahut important hoti hai.

Ek chhoti si setting-out mistake aage chal kar room alignment, column position, setback aur structure mein problems create kar sakti hai.

💡 GURU G EXPERT TIP:
Foundation ka kaam start karne se pehle layout ko drawing ke according cross-check zaroor karein. Ek baar extra measurement, future ki badi problem se bacha sakta hai.

🇮🇳 Aaj ke din ek strong ghar ke saath ek strong India ka sapna bhi banayein.

Zero se Finish tak — har din ek practical construction tip. 🏗️