Wolter

Home
India
Bhiwadi
Wolter

We are in Design & Manufacturing of Ventilation and Special Application Fans

13/08/2026

An EC motor changes the math on running a fan. Wolter EC Fans use it to trim power use, with power saving up to 40% while holding airflow exactly where you set it. They run quiet, last long and barely need maintenance, which earns them a spot in HVAC systems, industrial setups and commercial kitchens. Lower bills, lighter footprint, the same air doing the same work.

Connect with us
👉🏼 8502005500
👉🏼 [email protected]

11/08/2026

Wolter Tunnel Ventilation Fans push high-velocity air through metro and road tunnels, clearing smoke, dropping the heat and pulling exhaust
gases out so commuters and crews can breathe. Built to keep working when conditions turn extreme. The airflow critical infrastructure can’t go without.

Connect with us
👉🏼 8502005500
👉🏼 [email protected]

09/08/2026

The hottest, stalest air in any building ends up at the roof, and it won’t leave on its own. Wolter Roof Extract Fans clear it out at high volume, with aerofoil blades and a direct drive that keep the extraction smooth through rain, heat and grit. Factory or mall, they hold the air moving and the temperature in check up top. Steady rooftop extraction, season after season.

Connect with us
👉🏼 8502005500
👉🏼 [email protected]

07/08/2026

Cleanrooms and air handling units want a precise air supply and not much noise to go with it. PLUG FANS deliver exactly that, running on backward-curved blades and a direct drive that skips the belt entirely. The air supply stays steady,
the sound stays low, and the low maintenance means they keep working long after you have stopped thinking about them. Reliable air supply for the rooms that can’t tolerate a slip.

Connect with us
👉🏼 8502005500
👉🏼 [email protected]

05/08/2026

Push air against heavy resistance and most fans groan. CENTRIFUGAL FANS don’t. The belt drive and double-inlet build move large, steady volumes while keeping the noise down, and adding aerofoil impellers sharpens the efficiency so you spend less to move more. For high-pressure work across plants and commercial blocks, this is airflow that holds its line.

Connect with us
👉🏼 8502005500
👉🏼 [email protected]

03/08/2026

Enclosed car parks and tunnels trap exhaust and stale air, and threading ductwork through them is a headache nobody wants. The JET FAN does away with that, throwing high-velocity air across the space to keep it clear and the sightlines clean.
It moves up to 9,000 m³/hr on low power, with the thrust confined spaces need to stay breathable. Fast, controlled ventilation without the duct run.

Connect with us
👉🏼 8502005500
👉🏼 [email protected]

01/08/2026

Industrial floors run hot, dusty and nonstop, and the fan overhead has to take all of it. The AXIAL FAN is that fan. A galvanised steel casing stands up to the punishment, and high-efficiency impellers shift serious volumes of air without drinking power. You can have it in both GI and Epoxy, depending on what your site faces. Plain, sturdy ventilation that shows up every shift.

Connect with us
👉🏼 8502005500
👉🏼 [email protected]

27/07/2026

Plug fans earn their place by doing a lot with little. Wolter Plug Fans run on backward-curved blades and a direct-drive setup, holding a precise air supply across HVAC systems, cleanrooms and industrial plants. They handle pressure cleanly, spread air evenly and keep maintenance low, so they fit almost anywhere the air supply has to stay dependable. Versatile by design, steady by habit.

Connect with us
👉🏼 8502005500
👉🏼 [email protected]

22/07/2026

Pull harsh fumes through a standard fan and it won’t last long. Wolter’s Chemical Fume Jet Fan is built for the corrosive, hazardous air that labs and chemical plants throw off. The chemical-resistant body shrugs off what would corrode lesser units, the airflow stays reliable, and the maintenance stays low. Where the air is dangerous, this is the fan that protects the people working in it.

Connect with us
👉🏼 8502005500
👉🏼 [email protected]

18/07/2026

Not every job leaves room for a bulky fan. Wolter RFD Inline Fans tuck straight into the duct work and still deliver, blending axial and centrifugal flow in one direct-driven unit. The mix-flow blade and built-in guide vane push high-pressure air through long runs without wasting energy or space. When the layout is tight but the airflow still has to be strong, these are the fans that fit.

Connect with us
👉🏼 8502005500
👉🏼 [email protected]

Address

Wolter Ventilators India Pvt. Ltd. Plot No. G1 795 794 793 Industrial Area Bhiwadi Road Number 20 A, Distt. Khairthal Tijara, BHARAT
Bhiwadi
301019

Website

https://www.wolterindia.in/new/

Alerts

Be the first to know and let us send you an email when Wolter posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Want your business to be the top-listed Contractor in Bhiwadi?