DP Diamond Drilling & Sawing LTD

DP Diamond Drilling & Sawing LTD Diamond Drilling & Concrete Cutting company based in Northwest, England

Cutting a trench into a concrete slab takes careful planning, the right equipment and a clean, controlled approach 💎From...
07/09/2026

Cutting a trench into a concrete slab takes careful planning, the right equipment and a clean, controlled approach 💎

From marking out and guide cuts to deeper sawing, breaking out and dust management, every stage matters when preparing space for pipework, drainage, electrical services or floor boxes.

Our blog explains how the process works, what equipment is needed and why specialist concrete cutting is often the safest and most efficient option.

Take a look today 👇

https://www.dpdiamonddrilling.co.uk/drilling-down/how-to-cut-a-trench-in-a-concrete-slab

Working in Conwy for Jennings Construction 👌We were brought in to scrabble a newly built bridge where several joints had...
02/09/2026

Working in Conwy for Jennings Construction 👌

We were brought in to scrabble a newly built bridge where several joints had high spots ranging from 5mm to 40mm.

Using a specialist scrabbling machine, we ground the areas down to achieve a more even finish and prepare the surface correctly.

Need concrete scrabbling or surface preparation for your project? Get in touch with our team today 👇

https://www.dpdiamonddrilling.co.uk/contact-us

Clean, controlled and completed with minimal disruption. 💎Dry diamond drilling is an ideal solution for many internal pr...
01/09/2026

Clean, controlled and completed with minimal disruption. 💎

Dry diamond drilling is an ideal solution for many internal projects, helping to create precise openings while keeping dust and mess to a minimum. It's great to hear our customer was pleased with both the process and the result.

31/08/2026

Precision chase cutting in Glastonbury 👌

We were brought in to cut chases ready for tracks to be fitted. As the work was indoors, we used our electric LISSMAC floor saw throughout.

Two 15mm x 15mm chases were completed using a 15mm blade. For the larger 40mm x 30mm chase, we used a 5mm blade to make two lines before carefully breaking out the section between them.

The client had travelled over from the Netherlands to complete the job alongside us and was very happy with the finished work.

Groundworks start with the right preparation. 👌Working for Spencer Wilkinson Construction in Preston, we carried out a r...
26/08/2026

Groundworks start with the right preparation. 👌

Working for Spencer Wilkinson Construction in Preston, we carried out a relief cut through 100mm of bitumen so it could be removed ready for new building footings.

Using our Husqvarna FS7000 floor saw, we completed the cut accurately and efficiently, leaving the site ready for the next stage of the project 💪

Reliability is something our customers value, and something we take seriously.From turning up when we say we will to com...
25/08/2026

Reliability is something our customers value, and something we take seriously.

From turning up when we say we will to completing the job efficiently and professionally, we're committed to delivering a service our customers can rely on. Thanks to everyone who takes the time to share their feedback.

Need a dependable diamond drilling contractor for your next project? Get in touch with our team today 👇

https://www.dpdiamonddrilling.co.uk/contact-us

24/08/2026

A tough weekend job in Scotland 💪

We were called to a recycling refinery during a shutdown to drill 107mm and 152mm inspection holes into the hoppers.

The concrete was only 80mm thick, but after years of being baked, it was extremely hard, with some holes taking up to an hour each. The work had to be completed over the weekend while the refinery was shut down, so there was no room for delays.

A challenging emergency job, but the team got it done.

Working for Tanro in Chesterfield 💪This new-build project involved both trench cutting and cutting out floor boxes throu...
19/08/2026

Working for Tanro in Chesterfield 💪

This new-build project involved both trench cutting and cutting out floor boxes through a 190mm thick reinforced concrete floor. The floor boxes measured 3m x 3m, with a 150mm hole drilled in each corner to eliminate the need for overcuts and achieve a clean finish.

We also cut a 25m long, 1m wide trench, making a cut every metre so the client could remove each section using an eye bolt after we had installed a 20mm nugget. The work was carried out using our Husqvarna FS5000 floor saw fitted with a 600mm blade.

A job where careful planning and accurate cutting made all the difference.

Every project starts with the right advice.Taking the time to understand the job, explain the options and recommend the ...
18/08/2026

Every project starts with the right advice.

Taking the time to understand the job, explain the options and recommend the best approach is just as important as the drilling itself. We're pleased to hear this customer was happy with both the service and the finished result.

Planning a project that requires specialist diamond drilling? Speak to our team to discuss the best solution 💪

https://www.dpdiamonddrilling.co.uk/contact-us

17/08/2026

Precision makes all the difference on jobs like this 💎

We were tasked with cutting out a section in a concrete plank measuring 4m long and 150mm deep, with sides measuring 450mm long.

To avoid overcuts, we drilled the corners before making the cuts. This helps produce a clean finish and reduces the risk of the concrete cracking when it's lifted into place.

Address

Warrington

Website

Alerts

Be the first to know and let us send you an email when DP Diamond Drilling & Sawing LTD posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to DP Diamond Drilling & Sawing LTD:

Shortcuts

Share

Category