David Wilson

09/10/2026

A CX in this week down on power and exhaust fumes in the cab. We found the turbo and exhaust were a little worse for wear. New parts fitted and back up and running.

24/09/2026

A customer phoned with problems with their drill and the control box not turning on. After a bit of an inspection I found the mice had been hard at work. After some new plugs and repairing some wires he was back up and drilling.

23/09/2026

A service I carried out on a John Deere 6520 the other day. I also replaced the bonnet grill. All parts were OEM and sourced from Yeowart Agricultural Ltd

15/09/2026

Archie Osborne was flat out last week building and checking over 3 new 62 series McConnell hedgecutter ready for there new homes.

28/08/2026

We have been flat out for August and keep forgetting to take photos but here are a few of some of the Massey and McCormick jobs we have been doing. These include a new radiator for a Massey 5455 and a McCormick MTX in for a new 4wd clutch.

28/08/2026

05/08/2026

With hedge cutting season not far away, we repaired this control box today for a customer. A new wiring loom and plug for the control box and a new plug and pins for the loom. Already to go now for the 1st September.

31/07/2026

We had this McCormick MTX 140 into the workshop with loss of drive this week. A broken circlip was found to be the problem and while it was in the customer asked for us to change the brakes for him as well. Good to keep the old girl going.

26/07/2026

A Massey in the workshop last week for an air con job. While it was in we also sorted out the dash lights for the customer.