21/06/2021
3.59 GBP per kg
BC RWS - Prefabricated wall systems for exterior and interior walls of residential and industrial buildings.
The price is 3.59 GBP per ton of constructions without VAT at the stage of unassembled profiles.
Option: GBP 0.50 / kg for assembling the profiles in the form of ready-to-install structural walls.
Construction plan 0.20 GBP/kg
Option: installation of prefabricated walls
Save up to 1/3 of the time and cost of construction
The exterior and interior walls of your building can be completed in the construction of the concrete columns and foundations of the building
Reduce costs by expensive specialists (installers and electricians)
Get a quality product with no chance of constructive human error
Solutions for developers, builders and governments.
Remember, it's not just about building better and faster today, it's about being ready to respond to new technologies and maximizing the benefits for your own organization from that day forward.
On average, you can expect impressive savings on total construction costs.
You can expect a big reduction in on-site labor.
Stunningly will save a lot of time to build.
An important feature of RWS - Ready Wall Systems are the light metal constructions made, as the size and thickness of the light metal profiles can vary depending on the height of the facade wall under wind loads acting on it. Possible large windows, railings and other architectural features. Partitions BC - Finished wall systems are usually located on site as individual elements that are pre-cut length, they can be pre-manufactured as large panels, already finished cladding.
BC - the finished wall systems in a multi-storey structure with a metal frame, it is now common practice to use partitions of light steel structures for quick drying of the package on the outer cladding. The same form of construction can be used as a wall or compartment to separate different parts of the building. The use of light partition walls with metal structures can be used in the construction of reinforced concrete. The light weight, speed and lightness of the construction are important design advantages that have led to a rapid increase in the use of this form of construction.
The advantages of BC lightweight steel infill walls used for exterior facades and exterior walls and interior partitions are as follows:
BC - Prefabricated wall systems - Speed of construction
Quick installation of partitions of light steel structures, creating a waterproof housing, allowing other activities in the building to be carried out much earlier than would be possible with hard-filled walls.
Ready Wall Systems - minimal use of materials and less work on the site
Less materials and less work are needed to lift and move the material, as the light metal frame consists of pre-assembled panels or assemblies of light sections "C", which are designed to cover the space between the floors. The construction process is "dry", so shrinkage and other drying problems are eliminated. Easily achievable save time by more than two weeks per floor.
BC - Finished wall systems - Waste is virtually eliminated by using cut along the profiles.
BC Ready Wall Systems - walls up to five meters high under high pressure wind
Ready Wall systems - exterior walls of light steel structures are resistant to wind loads up to 2kN / m2.
This pressure can occur in tall buildings or in corners due to local wind pressure. Usually in this case internal columns are used every 400 mm, which can extend up to 3.6 m between floors. In regions with high wind pressure or higher wall, using load-bearing systems partition wall with a width of 140 mm. For indoor applications, a light opening of up to 7 meters can be achieved with walls.
BC - Lightweight ready-made wall systems
Lightweight steel walls are lighter than conventional solid walls and do not apply heavy linear loads to the floor. The typical lightweight steel structure with light cladding is 2kN / m. This is often crucial in renovated buildings, where the quality of the original floor construction is not enough to withstand heavy loads.
Ready Wall Systems - you can use a wide range of cladding systems, as the design can carry any type of light and decorative cladding system.
Ready Wall Systems - can be moved to expanding buildings, etc.
Ready Wall Systems - in hospitals, schools and other similar applications, lightweight steel walls have important advantages because the partitions are movable during the life of the building.
BC - Prefabricated wall systems - Fire resistance
Steel is non-combustible, unlike wood and a period of up to 120 minutes fire resistance can be achieved by using several layers of "refractory" drywall (corresponding to BS EN 520, Type F).
BC - Prefabricated wall systems - Good acoustic performance
Lightweight walls of metal structures can achieve excellent sound insulation of 60 db + when using double layers of drywall and insulation layer between the trays.
BC - Prefabricated wall systems - Good thermal properties
The high level of thermal insulation is provided by the various foam insulation panels, which is attached externally to the profiles to create a "hot frame". U-value less than 0.2 W / m 2, this can be achieved by using closed cell isolation.
BC - Ready Wall systems - Possibility to create large openings BC - Ready Wall systems - large windows with a height of three meters and a width of five meters can be made, which is not possible with other materials.
