Howells Patent Glazing

Directions Website Contact the business

Howells Patent Glazing Family run business based in Cradley Heath, heart of the Black Country. Suppliers and installers of Traditional types of bar can also be provided if required.

Howells Glazing Bar Systems

A well respected manufacturer of roof glazing solutions since 1973

Howells Patent Glazing Ltd systems has since 1973 been involved in the supply and installing of patent glazing in both roof and vertical applications using single or double glazing or polycarbonate sheet. Key staff have over 30 years experience in the industry, giving HPG in-depth expertise in the design of roof and vertical systems. Applications
The system is suitable for use in Shopping Malls, Schools, Retail Complexes and Factory Units. Description
The range provides for inverted glazing bars to suit various spans. All glazing bars can successfully incorporate top hung opening lights, smoke ventilators window inserts and louvres. The requirement of suitable structural supports should be considered at an early stage in the project therefore the Company would suggest its involvement at the earliest opportunity. Manufacture Composition
Glazing bars are extruded from aluminium alloy complying with BS 1474 designation 6063T6 ancillary components such as flashing, closures weathering and gutters, can be provided from preformed aluminium alloy to BS 1470. Appearance
All glazing bars and ancillary components can be supplied in mill finish, natural or colour anodised to BS 3987 or polyester powder coated to BS 6496 in a wide range of colours. Design Considerations
(Heat and Light)
Solar performance characteristics for typical glasses and double glazing units can be provided upon request. (Weather Resistance)
Adherence to the design recommendations of BS 5516 will ensure adequate weather resistance for glazing pitched above 15 degrees. For glazing slopes lower than 15 degrees consult Howells Patent Glazing Ltd for advice. Services
A comprehensive advisory service is available to assist with initial design and cost targets. Detail drawings will be prepared in accordance with the agreed design requirements and submitted for approval prior to commencement of manufacture. For further information contact:-
Howells Patent Glazing Ltd
Triton Works
Woods Lane
Cradley Heath
West Midlands
B64 7AN

Tel: 01384 820060 Fax: 01384 820061

Web Site: http://www.howellsglazing.co.uk
Email: (Contracts) [email protected]
Email: (Supply Only) [email protected]

SLEEK DESIGN. BRIGHTER SPACES.Designed to bring natural light into the heart of the home, this sloped patent glazing ins...
16/10/2026

SLEEK DESIGN. BRIGHTER SPACES.

Designed to bring natural light into the heart of the home, this sloped patent glazing installation combines a clean, contemporary finish with excellent thermal performance.

Using our HGR1 Rafter Bars, the system has been finished in RAL7021 Matt Black/Grey, creating a smart contrast against the surrounding slate roof and giving the installation a sleek, integrated appearance.

The 28mm double glazed units comprise:
🔹 6mm HS Toughened Clear outer pane
🔹 16mm argon-filled cavity with black spacer
🔹 6mm HS Toughened Planitherm Ultra N 1.1 inner pane
🔹 Centre pane U-value: 0.7 W/m²K

A bespoke glazing solution that doesn't just introduce more daylight – it becomes part of the architecture.

CONTEMPORARY GLAZING. TIMELESS BUILDINGS.Modern glazing can transform a building without taking away from the character ...
14/10/2026

CONTEMPORARY GLAZING. TIMELESS BUILDINGS.

Modern glazing can transform a building without taking away from the character that makes it unique.

This series of bespoke rooflights uses our HG 105mm aluminium box glazing bars with thermal barrier, creating clean, contemporary lines that sit beautifully alongside the existing architecture while flooding the spaces below with natural light.

Finished in RAL7015 Matt externally with RAL9910 Satin White internally, the system delivers a considered finish from every angle.

The 28mm double glazed units comprise:
🔹 6mm Toughened SKN176ii solar control outer pane
🔹 14mm argon-filled cavity with black warm-edge spacer
🔹 8.8mm heat-soaked toughened & laminated clear inner pane
🔹 Centre pane U-value: 1.0 W/m²K

A great example of modern glazing technology working in harmony with a more traditional setting.

BESPOKE GLAZING FOR EVERY SPACE.Not every project comes with a straightforward space – and that’s exactly where bespoke ...
12/10/2026

BESPOKE GLAZING FOR EVERY SPACE.

Not every project comes with a straightforward space – and that’s exactly where bespoke glazing makes the difference.

This Sloped Patent Glazing installation has been designed to maximise natural light within a restricted area, creating a clean, contemporary finish that works seamlessly with the existing property.

Measuring 3425mm × 1500mm across five fixed panes, the system features HG57 Glazing Bars, finished in RAL7009 Matt Grey for a subtle, modern look.

The 28mm double glazed units comprise 6mm heat-strengthened toughened clear outer glass, a 16mm argon-filled cavity with black warm-edge spacer, and 6mm heat-strengthened toughened clear Low-E inner glass – achieving a centre pane U-value of 1.0 W/m²K.

Proof that even challenging spaces can be transformed with the right glazing solution.

Traditional architecture meets modern glazing.This bespoke sloped patent glazing installation shows how contemporary gla...
09/10/2026

Traditional architecture meets modern glazing.

This bespoke sloped patent glazing installation shows how contemporary glazing can work beautifully alongside a building with real character.

Designed for a striking thatched-roof property, the project comprises four 3410mm × 1360mm glazed sections, each formed from three fixed panes. The result brings natural light deep into the building while integrating neatly with the existing architecture.

The system uses HG2 aluminium glazing bars, finished in RAL7043 Matt Traffic Grey, alongside high-performance 48.8mm triple glazed units.

A great example of bespoke glazing being designed around the building – rather than asking the building to compromise for the glazing.

CHALLENGING SPACE. MADE TO FIT.When standard solutions simply won’t work, bespoke glazing comes into its own.Installed w...
07/10/2026

CHALLENGING SPACE. MADE TO FIT.

When standard solutions simply won’t work, bespoke glazing comes into its own.

Installed within an awkward and restricted space, this Sloped Patent Glazing system was designed around the area available – proving that challenging architecture doesn’t have to limit what’s possible.

Spanning 4600mm × 2060mm across five panes at a 13° slope, the system uses our HGR1-48 MC1 Rafter Glazing Bars, finished in RAL 8025 Matt.

The 46mm triple glazed units comprise:

🔹 6mm Toughened Active Clear outer
🔹 14mm argon-filled cavity with black spacer
🔹 6mm Toughened Optitherm S3 Pro T middle
🔹 14mm argon-filled cavity with black spacer
🔹 6.4mm Laminated Planitherm S3 inner
🔹 Centre pane U-value: 0.7 W/m²K

Because even the most awkward spaces can make room for great glazing.

05/10/2026

AWKWARD SPACE? SMART SOLUTION.

Not every space is straightforward – but that doesn’t mean it can’t be transformed.

This Monopitch Roof Glazing system was constructed within a particularly awkward space, demonstrating how a bespoke glazing solution can make the most of challenging areas while creating a clean, contemporary finish.

Manufactured using our HGR1 Rafter Bars and finished in RAL 7016 Matt Anthracite Grey, the system features high-performance 28mm double glazed units:

🔹 6mm Toughened 70/35 Solar Control outer pane
🔹 16mm argon-filled cavity with black warm edge spacer
🔹 6mm Heat Soaked Toughened S1 Low-E inner pane
🔹 Centre pane U-value: 1.0 W/m²K

Awkward spaces still have potential – they just need the right solution.

Natural light, designed into every detail.This monopitch roof glazing system combines a clean, contemporary appearance w...
02/10/2026

Natural light, designed into every detail.

This monopitch roof glazing system combines a clean, contemporary appearance with practical everyday performance, bringing an abundance of daylight into the space below.

Featuring 7 glazed panes and 1 opening vent, the installation uses HG1/105/44 aluminium box glazing bars with square caps, finished in RAL1015 Matt Light Ivory for a softer architectural finish.

The 28mm double glazed units incorporate SN70/35 outer glass, an argon-filled cavity with a black warm edge spacer and a heat-soaked Low-E inner pane, achieving a centre pane U-value of 1.0 W/m²K.

A beautifully engineered solution that delivers light, ventilation and thermal performance in one seamless design.

📧 Sales: [email protected]
📞 01384 820060

More light. Better performance. Beautifully engineered.This monopitch roof glazing installation combines clean contempor...
28/09/2026

More light. Better performance. Beautifully engineered.

This monopitch roof glazing installation combines clean contemporary lines with high-performance glazing to create a brighter, more comfortable living space.

Using our HGR1-48 MC1 aluminium rafter glazing bars in a sleek RAL9005 Matt Black finish, the system features 46mm triple glazed units incorporating solar control and Low-E glass for excellent thermal performance.

With a centre pane U-value of just 0.7 W/m²K, it’s designed to maximise natural light while helping maintain a comfortable internal environment throughout the year.

A modern glazing solution where performance and design work hand in hand.

📧 Sales: [email protected]
📞 01384 820060

✨ More Natural Living. All Year Round.A contemporary low pitch canopy glazing solution measuring 7950mm × 2730mm, constr...
25/09/2026

✨ More Natural Living. All Year Round.

A contemporary low pitch canopy glazing solution measuring 7950mm × 2730mm, constructed in 16 no. panes. Designed to flood the space with natural light, creating a brighter, more connected living environment, whatever the season.

Key specifications include:

🔹 HG3 glazing bars – clean lines and a contemporary finish
🔹 Low pitch canopy – designed for light and built for everyday living
🔹 Polyester powder coated finish – Ref RAL9005 Matt Black
🔹 28mm double glazed units, comprising:
• 6mm Toughened Clear outer pane
• 16mm Argon-filled cavity with Black Warm Edge Spacer
• 6mm Heat Soaked Toughened Clear inner pane
• Centre Pane U-Value 1.0 W/m²K

Designed to deliver brighter spaces, contemporary design, high performance and a lasting investment with quality materials and timeless results.

📧 Sales: [email protected]
📞 01384 820060

✨ Architectural Light Without CompromiseA precision-engineered glazing solution designed to bring natural light, thermal...
23/09/2026

✨ Architectural Light Without Compromise

A precision-engineered glazing solution designed to bring natural light, thermal efficiency and contemporary design together.

Our patent glazing to north and south elevation features:

🔹 HG50 aluminium light glazing bars with thermal pressure plate and cap

🔹 Polyester powder coated finish – Ref RAL9910 Satin White

🔹 28.8mm double glazed units, comprising:
• 6mm Toughened Low E clear outer pane
• 14mm Argon-filled cavity with warm edge spacer
• 8.8mm White Satin Heat Strengthened Laminated Inner
• Centre Pane U Value 1.1 W/m²K

Designed for enhanced natural light, improved thermal performance, a contemporary aesthetic and long-term durability.

📧 Sales: [email protected]
📞 01384 820060

Address

Triton Works, Woods Lane
Halesowen
B647AN

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 4pm

Alerts

Be the first to know and let us send you an email when Howells Patent Glazing posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Howells Patent Glazing:

Shortcuts

Share