EX10 Damp Proofing | Mould Removal | Ventilation | Flat Roofing | Property Preservation
Serving Dorset & Surrounding Areas
Honest Investigations. Proven Solutions.

Covering Dorset, East Dorset, Purbeck, Bournemouth, Christchurch & Poole and surrounding areas. EX10 Ltd specialises in damp proofing, mould remediation, ventilation solutions, flat roofing and property preservation across Dorset and surrounding areas. We help homeowners, landlords and commercial clients identify and solve issues relating to rising damp, penetrating damp, condensation, mould growt

h, water ingress and moisture-related building defects. Our approach is simple: investigate first, identify the cause and recommend the most appropriate solution for the property. Services include:
✔ Damp Surveys & Investigations
✔ Rising Damp Treatments
✔ Mould Remediation
✔ Condensation Control
✔ Positive Input Ventilation (PIV)
✔ Extractor Fan Installation
✔ Leak Detection
✔ Flat Roofing & Waterproofing
✔ Property Preservation
Covering Bournemouth, Poole, Christchurch, Wimborne, Ferndown, Ringwood, New Milton, Wareham, Swanage, Dorchester, Weymouth and surrounding areas.

🔎 One Damp Problem... Multiple Causes... One Complete Solution.Pauline contacted us after noticing serious signs of damp...
29/06/2026

🔎 One Damp Problem... Multiple Causes... One Complete Solution.

Pauline contacted us after noticing serious signs of damp affecting the ground floor of her home in Poole.

Our initial survey revealed more than just damp walls. As we investigated further, we uncovered wet and mould-contaminated flooring, deteriorated timber and moisture issues that needed addressing both inside and outside the property.

Rather than simply treating the visible symptoms, we looked at the property as a whole.

Our remedial works included:

✔ Thorough investigation and diagnosis
✔ Replacement of decayed timber flooring
✔ Installation of a new damp-proof membrane
✔ New insulation between the floor joists
✔ New structural plywood flooring
✔ High-performance underlay and new flooring
✔ Installation of an ACO drainage channel externally to reduce moisture against the building

For us, damp proofing isn't about applying one product and hoping for the best. It's about understanding how moisture is entering a property and putting together the right combination of solutions to resolve it.

Every property is different, which is why every solution should be too.

A huge thank you to Pauline for trusting EX10 with her home and for leaving such fantastic feedback. ⭐⭐⭐⭐⭐

If you're experiencing damp, mould, musty smells or deteriorating floors, we'd be happy to help.

📍 Covering Dorset & surrounding areas.

🏠 Recent Damp Proofing Project – BournemouthThis property was suffering from rising damp affecting multiple ground floor...
15/06/2026

🏠 Recent Damp Proofing Project – Bournemouth

This property was suffering from rising damp affecting multiple ground floor walls throughout the home.

Rather than jumping straight into a solution, we started with a thorough investigation and process of elimination to rule out other possible causes, including condensation, external bridging, leaks and penetrating moisture.

Once we were satisfied we were dealing with genuine rising damp, we carefully carried out the remedial works:

✔ Removal of contaminated plaster
✔ Installation of a damp-proof barrier system
✔ Specialist waterproofing treatment
✔ Reinstatement using breathable materials
✔ Careful lifting and reinstatement of flooring where required

One thing we're seeing more and more is walls being covered with plastic membrane systems without properly understanding why the wall is wet in the first place.

In our experience, understanding the cause of the moisture is just as important as the treatment itself. Simply hiding damp behind a membrane doesn't always solve the underlying issue.

The photos show the journey from investigation and preparation through to the completed result.

If you're experiencing damp, mould, peeling plaster or musty smells, it pays to understand the cause before deciding on the solution.

📍 Dorset & Surrounding Areas
📞 Get in touch to arrange a damp survey

High external ground levels are a very common cause of penetrating damp.When soil, paving, or render sits too high again...
19/01/2026

High external ground levels are a very common cause of penetrating damp.

When soil, paving, or render sits too high against a property, it allows moisture to bridge into the wall and transfer straight through to the internal surfaces.

Over time this can lead to:

• Damp patches internally
• Blown or salt-contaminated plaster
• Mould forming at low level
• Cold, moisture-laden walls

Reducing ground levels and managing water away from the building is essential to prevent moisture entering the structure.

If you’re seeing damp inside and your external ground levels are high, this could be the cause.

Get in touch if you’d like us to take a look.





We were recently called to a property where thermal imaging showed very cold readings along the top of the skirting boar...
14/01/2026

We were recently called to a property where thermal imaging showed very cold readings along the top of the skirting boards.

On further investigation, the issue wasn’t the walls at all — the subfloor was extremely damp and poorly ventilated.

When a subfloor is damp and unvented it can lead to:

• Cold floors and cold walls
• Condensation forming internally
• Mould developing around skirtings
• Damp air rising into the living space
• Deterioration of floor timbers over time

We installed ventilation to improve airflow, allowed the area to dry, and then put everything back properly.

If you’re experiencing cold walls, mould at low level, or unexplained damp, the problem may be under your feet.
Get in touch if you’d like us to investigate.





Cold walls & thermal bridgingMould often starts in corners for a reason.Cold internal corners create thermal bridges, al...
07/01/2026

Cold walls & thermal bridging

Mould often starts in corners for a reason.
Cold internal corners create thermal bridges, allowing condensation to form and mould to return again and again.

Identify the cold spots to fix the cause not just the mould.

📞 Contact us for expert advice.

05/01/2026

Water must be managed away from the property, not allowed to sit against it.

Here we’ve installed ACO / French drains to direct water away from the building and reduce pressure on the external walls.

When water is allowed to build up against a property, it can lead to water ingress, penetrating damp, and even rising damp.

Correct water management is a key part of long-term damp prevention.





This wall has previously been treated, but no salt inhibitor was applied.Because of this, salts are still migrating thro...
30/12/2025

This wall has previously been treated, but no salt inhibitor was applied.

Because of this, salts are still migrating through the wall and appearing on the surface.

Even when a wall feels dry, hygroscopic salts can continue to attract moisture, leading to staining, blistering paint, and failure of finishes.

If salts aren’t dealt with correctly during treatment, they will keep coming back.










Chimneys are often naturally damp spaces and one of the most common hidden routes for water ingress.Cracked or failing f...
29/12/2025

Chimneys are often naturally damp spaces and one of the most common hidden routes for water ingress.
Cracked or failing flaunching, uncapped chimneys, and damaged brickwork all allow rainwater to enter and track down internally.
Chimneys that have been taken down internally but not properly vented can also trap moisture, leading to penetrating damp and staining on surrounding walls.
Old chimney soot is hygroscopic — it stays damp and draws moisture and salts through to internal finishes, even long after the fireplace has been removed.
If you're noticing staining, damp patches, or suspect water may be entering via a chimney, get expert advice early before the problem worsens.
Contact us 01202
790212

17/12/2025

Got a leak? 💧 Don’t spend money on damp treatments until everything is ruled out.
Many damp issues are caused by leaks - not “rising damp.” A full investigation should always come before treatment.

📞 Contact us for any damp issues.

Address

Rear Of 1464 Wimborne Road
Bournemouth
BH107AS

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Alerts

Be the first to know and let us send you an email when EX10 posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to EX10:

Shortcuts

Featured

Share