Woolf Plumbing

Directions

Woolf Plumbing Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Woolf Plumbing, Plumbing service, Alton.

🚨 Baxi Solo - Failed flue sealsAnother Baxi solo attended to today where, due to the age of the boiler, the flue seals h...
28/08/2026

🚨 Baxi Solo - Failed flue seals

Another Baxi solo attended to today where, due to the age of the boiler, the flue seals had started to perish.

When seals deteriorate, they can compromise the combustion system and potentially lead to increased levels of Carbon Monoxide- a serious and potentially dangerous issue.

🔥 This is why regular servicing is so important, particularly on older boilers.

A boiler may appear to be working perfectly, but that doesn’t necessarily mean it’s operating safely.

âś… Full service
âś… Safety checks
âś… Replacement of worn components where required.

Get your boiler checked today!

📲 07340641117
Woolf plumbing- keeping your heating safe, efficient and reliable

Boiler pressure keeps dropping? 👀 If you’re constantly topping up the boiler pressure, the expansion vessel could be the...
25/08/2026

Boiler pressure keeps dropping? đź‘€

If you’re constantly topping up the boiler pressure, the expansion vessel could be the culprit!

When the expansion vessel loses it’s charge, the pressure can rise too much when the heating comes on, causing the safety valve to discharge water - leaving the homeowner reaching for the filling loop again and again.

đź’ˇA simple but important fault that can easily be overlooked.

If you’re regularly having to top up your boiler pressure, don’t just keep adding water - get the system checked to find out why.

📲 Need help with a boiler pressure issue? Get in touch!

A recent service on an Ideal boiler highlighted exactly why regular servicing is so important.  During the service, we f...
22/08/2026

A recent service on an Ideal boiler highlighted exactly why regular servicing is so important. During the service, we found a failed burner seal, a component that could easily go unnoticed without a proper inspection.

A boiler service isn’t just about keeping your boiler running. It helps identify worn or failed components early, maintain safe operation, prolong the life of the boiler and potentially prevent an expensive breakdown.

🔧 Ideal boiler plate heat exchanger replacement 🔥Another Ideal boiler back up and running after a faulty plate heat exch...
19/08/2026

🔧 Ideal boiler plate heat exchanger replacement 🔥

Another Ideal boiler back up and running after a faulty plate heat exchanger was diagnosed and replaced.

The new heat exchanger was fitted, the system checked over and the boiler tested to make sure everything was operating correctly âś…

Another job completed and another customer back up and running with reliable heating and hot water. đź’Ş

📲For boiler repairs, servicing or heating work, get in touch.

Ideal logic gas valve 🔥This ideal logic was struggling to maintain a flame, so I got to the root of the problem and repl...
12/08/2026

Ideal logic gas valve 🔥
This ideal logic was struggling to maintain a flame, so I got to the root of the problem and replaced the faulty gas valve đź”§

The key to a good repair isn’t just diagnosing the fault- it’s having the right parts on the van when you arrive.
Thankfully we had the right part in stock, meaning we could get the job sorted there and then without waiting for parts.
âś… Accurate fault finding
âś… Correct genuine part
âś… Repair on first visit
âś… Customer up and running with minimal disruption

Keeping the van well stocked means less waiting, fewer visits and most importantly a better service for our customers.

Worcester Cdi system boiler was firing up but not moving any of the heat past the boiler. Checked the pump and as I susp...
04/03/2026

Worcester Cdi system boiler was firing up but not moving any of the heat past the boiler. Checked the pump and as I suspected it wasn’t spinning, ordered a new pump and due to a parts upgrade I had to change the PCB as well. Switched it all back on and everything back to working how it should.

Ideal logic showing FD fault no water flow; checked the pump was running, checked the system had water and tested the PC...
03/03/2026

Ideal logic showing FD fault no water flow; checked the pump was running, checked the system had water and tested the PCB. After performing these tests it indicated a faulty flow switch, once I replaced this the boiler was back up and running and another satisfied customer.

🔧Vaillant F29 fault code🔍. This fault code indicates a flame loss failure during operation, often linked to issues with ...
01/03/2026

🔧Vaillant F29 fault code🔍. This fault code indicates a flame loss failure during operation, often linked to issues with the gas valve or ignition sequence. Replaced the faulty gas valve and got the boiler back up and running 🔥. Another happy customer with heating and hot water
âś… Fast diagnosis. âś… Quality parts. âś… Reliable service

Address

Alton

Website

Alerts

Be the first to know and let us send you an email when Woolf Plumbing posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share