PS Products Oy

The next generation of pipe casings are here! By using the PS pipe casings you will have cost and time savings for the installation work! The PS casings were developed for use in all areas where surface installation of pipes are required. Below are the primary benefits from our point of view that are all related to Cost Savings

1) Reduced moments of installation
a. Less cutting
c. Less measuremen

ts
d. Less patching up

2) Ease of access
a. Casing possible to reopen easily
b. Hinged wall for quick access to installations

3) Material savings
a. Less waste

Piping is easily done with the patented casing as it can be mounted both on walls and in the ceiling. The installation of the casing is easy and it also allows pressing tools to be used on the pipes as one side of the casing is hinged. Corners and joints are easily covered with the special modules developed for this purpose. The pipe clamps are rotated into place in the tracks inside the casing. These can later be moved laterally if needed. All corners and joints are covered by modules that are easily clicked into place. The overlapping of the modules (20mm) covers small cutting errors. When the piping is completed the pipes can be insulated with max. 9mm thick insulation. After insulating the pipes the lid can be installed. The rigid casing gives a neat and professional end result which is relished by all parties. The casing is also easy to wipe down and keep clean and hygienic. The lid is easily removed for inspections and services!