Air Track Inc

Air Track Inc Commercial & Industrial HVAC Repair & Maintenance Contractor Mississauga

Commercial Properties: Are your Rooftop HVAC Units (RTUs) ready for severe summer storms?High winds, heavy downpours, an...
06/25/2026

Commercial Properties: Are your Rooftop HVAC Units (RTUs) ready for severe summer storms?

High winds, heavy downpours, and sudden summer storms can cause severe structural and electrical damage to exposed rooftop equipment. Securing your RTUs now protects your building from costly downtime and structural leaks.

Essential steps to storm-proof your rooftop HVAC systems:

🏗️ Audit Tie-Downs & Curbs: Ensure structural fastings, vibration isolators, and roof curbs are tightly secured against high wind uplift forces.

🛡️ Install Hail Guards: Protect vulnerable condenser coils from impact damage caused by flying debris and heavy hail.

🧹 Clear Rooftop Drainage: Blocked roof drains turn your roof into a swimming pool, risking water intrusion through the RTU base.

⚡ Verify Surge Protection: Test electrical disconnects and ensure surge suppressors are functional to handle lightning strikes.

Read our full guide on securing and protecting your commercial RTUs this summer:
🔗 https://www.airtrackhvac.com/hvac-industry-news/high-winds-and-summer-storms-securing-and-protecting-commercial-rooftop-hvac-units-rtus/

👋 Connect with our commercial HVAC team today:
📞 Call us today: 905 330 4056
📧 Email: [email protected]
🌐 Website: airtrackhvac.com
📍 Address: 16 Falconer Dr #5, Mississauga, ON L5N 3M1

Manufacturing Plants: Is process heat slowing down your production lines this summer?High ambient summer temperatures co...
06/25/2026

Manufacturing Plants: Is process heat slowing down your production lines this summer?

High ambient summer temperatures combined with massive internal heat loads from machinery can rapidly degrade product quality, trigger equipment trips, and compromise worker safety. Keeping your manufacturing floor cool and regulatory-compliant requires industrial-grade climate control.

How to combat extreme process heat loads right now:

⚙️ Dedicated Process Chilling: Isolate and cool high-heat machinery directly rather than overworking your facility's ambient HVAC.

🌬️ Strategic Ventilation & Makeup Air: Deploy positive pressure systems to push out concentrated hot air and bring in conditioned, filtered fresh air.

📊 Thermal Load Audits: Balance structural heat gain with machinery heat output to eliminate dangerous factory hot spots.

Read our full guide on keeping manufacturing lines cool and compliant this summer:
🔗 https://www.airtrackhvac.com/hvac-industry-news/combating-process-heat-load-keeping-manufacturing-lines-cool-and-compliant-this-summer/

👋 Connect with our industrial HVAC specialists:
📞 Call us today: 905 330 4056
📧 Email: [email protected]
🌐 Website: airtrackhvac.com
📍 Address: 16 Falconer Dr #5, Mississauga, ON L5N 3M1

Ontario Industrial Facilities: June means peak demand charges are back.With chiller plants making up to 40% of your faci...
06/25/2026

Ontario Industrial Facilities: June means peak demand charges are back.

With chiller plants making up to 40% of your facility's power footprint, an unoptimized system during grid peaks can skyrocket your Global Adjustment (GA) fees for the entire year.

4 ways to slash peak chiller costs right now:

⚙️ Demand Limiting: Program smart load shedding into your automation systems during high-tariff grid peaks.

💧 Chilled Water Reset: Dynamically raise supply temperatures when humidity drops to cut compressor workloads.

🧼 Condenser De-scaling: Clear out tube fouling to stop compressors from drawing excess peak kilowatts.

🔄 VFD Sequencing: Run multiple chillers at optimized part-load curves instead of maxing out a single unit.

Read our full expert breakdown on mitigating Ontario's summer peak demand charges here:
🔗 https://www.airtrackhvac.com/hvac-industry-news/mitigating-ontarios-peak-demandcharges-industrial-chiller-optimizationstrategies-for-june/

👋 Get in touch with our industrial energy team:
📞 Call us today: 905 330 4056
📧 Email: [email protected]
🌐 Website: airtrackhvac.com
📍 Address: 16 Falconer Dr #5, Mississauga, ON L5N 3M1

Still paying for fixed-calendar HVAC maintenance checks that don't actually prevent downtime? It’s time to switch to Out...
06/25/2026

Still paying for fixed-calendar HVAC maintenance checks that don't actually prevent downtime? It’s time to switch to Outcome-Based Maintenance (OBM).

Traditional commercial maintenance models rely heavily on arbitrary calendars—inspecting equipment every few months regardless of actual run hours, system wear, or actual energy efficiency. Outcome-Based Maintenance (OBM) completely flips the script.

Instead of tracking activities (how many filters were changed), OBM focuses entirely on results—guaranteeing specific performance metrics like peak thermodynamic efficiency, 99.9% uptime, optimized indoor air quality, and measurable energy savings.

By integrating real-time data, predictive diagnostics, and specific building goals, switching to an OBM framework helps facilities achieve:
📉 Drastic Cost Reductions: Stop spending money on unnecessary manual checkups and start addressing issues exactly when the data tells you to.
⏳ Extended Asset Lifecycles: Continuous performance optimization prevents minor component stresses from evolving into catastrophic system failures.
📈 Total Operational Transparency: Rely on clear data and verifiable performance outcomes rather than just a signed technician checklist.

If you are managing a commercial facility or industrial plant in the Greater Toronto Area, shifting away from rigid, legacy contracts to a proactive, results-oriented partnership is one of the smartest operational decisions you can make.

The industrial and commercial HVAC specialists at AirTrack HVAC are ready to help you map out your transition to high-efficiency OBM. Reach out to design an outcome-driven strategy engineered specifically for your facility.

👋 Get in touch with our commercial team:
📞 Call us today: 905 330 4056
📧 Email: [email protected]
🌐 Visit us: airtrackhvac.com
📍 Find our office: 16 Falconer Dr #5, Mississauga, ON L5N 3M1

Is your industrial cooling tower prepared for the peak summer heat?As temperatures climb, your cooling towers work overt...
06/25/2026

Is your industrial cooling tower prepared for the peak summer heat?

As temperatures climb, your cooling towers work overtime to keep your facility running. But that hot, wet environment creates a perfect storm for two massive operational risks: Mineral Scaling and Biological Fouling.

Without a precise, data-driven water treatment strategy, these summer conditions can rapidly lead to:
📉 Lost Efficiency: A layer of calcium scale thinner than a business card can slash your heat exchange efficiency by over 10%—skyrocketing your energy bills.
🔬 Biological Risks: Warm water loops invite algae, slime-forming biofilms, and dangerous pathogens like Legionella, exposing your organization to major safety liabilities.
⚙️ System Corrosion: Microbiologically Influenced Corrosion (MIC) can quietly eat through carbon and stainless steel, causing sudden pipe leaks and structural failure.

Protect Your Facility This Summer
Keeping your system running at peak thermodynamic efficiency requires exact chemical balancing, calibrated biocide dosing, and automated blowdown controls. Don't leave your facility's energy budget and bio-safety to guesswork!

AirTrack HVAC's commercial maintenance team is here to help you secure your systems. Schedule an intensive cooling tower performance audit, water analysis, and optimization service today.

👋 Get in touch with the experts:
📞 Call us today: 905 330 4056
📧 Email: [email protected]
🌐 Visit us: airtrackhvac.com
📍 Find our office: 16 Falconer Dr #5, Mississauga, ON L5N 3M1

Here is a professional Facebook post description designed for Air Track HVAC based on the provided link:💧 Is "Low Delta ...
05/23/2026

Here is a professional Facebook post description designed for Air Track HVAC based on the provided link:

💧 Is "Low Delta T" Syndrome the Silent Killer of Your Facility's Efficiency? If you manage a large commercial complex or industrial plant, your chilled water loop could be wasting massive amounts of energy without you even realizing it. Low Delta T syndrome happens when the difference between your supply and return water temperatures is much smaller than designed. The result? Your system pumps excessive water, forcing chillers to work harder without reaching full cooling capacity. 💸

⚠️ Look out for these classic warning signs in your facility:

Chillers are running at part-load while your pumps are working at 100%.

Extra chillers keep staging on, even when the overall building cooling load is low.

There is inconsistent cooling or warm spots in remote wings of your building.

At Air Track HVAC, we specialize in advanced hydronic balancing solutions to solve this engineering challenge. By installing Pressure Independent Control Valves (PICVs) and recalibrating secondary pumping systems, we make sure each Air Handling Unit (AHU) gets exactly the flow it requires. Restoring your Delta T to design specifications can reduce your pumping energy costs by 20% or more!

Stop paying for wasted pumping energy. Let our expert engineering team perform a thorough flow analysis and central plant optimization for your facility.

🔗 Read our full mechanical breakdown here: https://www.airtrackhvac.com/hvac-installation-commissioning/solving-low-delta-t-syndrome-in-chilled-water-loops/

📞 Call us today: 905 330 4056
📍 Visit us: 16 Falconer Dr #5, Mississauga, ON L5N 3M1
🌐 Email: [email protected] | airtrackhvac.com

Is Your Cold Storage Facility Prepared for Seasonal Humidity Spikes? As outdoor humidity levels rise, the thermal load o...
05/23/2026

Is Your Cold Storage Facility Prepared for Seasonal Humidity Spikes? As outdoor humidity levels rise, the thermal load on cold storage, warehouses, and logistics facilities increases exponentially. Standard cooling systems often fall short against heavy latent heat loads, leaving your operations vulnerable to inventory damage and safety hazards.

Managing moisture is critical to protecting your business from:
🛑 Structural issues like ice build-up on evaporators.
🛑 Safety hazards like slippery, wet floors in high-traffic loading bays.
🛑 Health and compliance risks like mold or microbial growth in food-grade or pharmaceutical products.

At Air Track HVAC, we implement advanced engineered solutions using Dedicated Outdoor Air Systems (DOAS) equipped with desiccant dehumidification. By treating outdoor air separately, your primary cooling systems can focus purely on temperature control—significantly lowering energy costs and reducing compressor wear.

Protect your cold chain integrity before the next humidity spike hits. Reach out to our industrial division today for a comprehensive facility evaluation!

🔗 Read the full industry insight here: https://www.airtrackhvac.com/hvac-industry-news/precision-humidity-control-for-cold-storage-logistics/

📞 Call us: 905 330 4056
📍 Visit us: 16 Falconer Dr #5, Mississauga, ON L5N 3M1
🌐 Email: [email protected] | airtrackhvac.com

Is Your Industrial Facility Still Running in Silos? In 2026, efficient facility management means looking beyond simple c...
05/23/2026

Is Your Industrial Facility Still Running in Silos? In 2026, efficient facility management means looking beyond simple cooling. Integrating your industrial HVAC systems into a centralized Building Automation System (BAS) is no longer a luxury—it’s a mechanical necessity for cutting operational overheads! ⚡

By connecting your chillers or Air Handling Units (AHUs) via advanced protocols like BACnet or Modbus, your building gains the power to:
📉 Reduce Energy Costs: Implement advanced strategies like peak shaving and demand response to lower utility tariffs.
🤖 Automate Efficiency: Coordinate with occupancy sensors to automatically modulate Variable Frequency Drives (VFDs) and reduce airflow in inactive zones.
📊 Gain Precision Control: Access real-time data logging for compliance audits and identify mechanical issues before they trigger costly alarms.

Ready to transition from legacy controls to a fully integrated, smart building system? Our technical team is here to manage everything from the audit to implementation.

🔗 Read the full guide here: https://www.airtrackhvac.com/seasonal-hvac-tips/integrating-industrial-hvac-with-building-automation-systems-bas/

📞 Call us today: 905 330 4056
📍 Visit us: 16 Falconer Dr #5, Mississauga, ON L5N 3M1
🌐 Learn more: [email protected] | airtrackhvac.com

The "Hidden" Energy Drain: Why Industrial Coil Cleaning is Your Top April Priority 🌬️💰As we transition from the heating ...
04/26/2026

The "Hidden" Energy Drain: Why Industrial Coil Cleaning is Your Top April Priority 🌬️💰

As we transition from the heating season, many commercial rooftop units (RTUs) and chillers are burdened with a winter’s worth of salt, dust, and debris. While seemingly minor, these contaminants act as thermal insulators, forcing your system to work significantly harder.

The Cold, Hard Facts:

Dirty condenser coils can increase energy consumption by up to 30%.

Just 1/100th of an inch of grime can reduce heat transfer efficiency by 21%.

Dirty coils are the leading cause of premature compressor failure.

Don't let invisible dirt inflate your summer energy bills. At AirTrack HVAC, our industrial-grade approach includes chemical neutralization, fin straightening, and performance baselining for a tangible Efficiency Gain report.

Learn more and schedule your restoration today:
🔗 https://www.airtrackhvac.com/hvac-installation-commissioning/the-hidden-energy-drain-why-industrial-coil-cleaning-is-your-top-april-priority/

Get in touch with the AirTrack Team:

📞 24 Hours & Emergencies: 905-330-4056
📧 Email: [email protected]
📍 Office: 16 Falconer Dr #5, Mississauga, ON L5N 3M1

Is Your Warehouse Prepared for the April "Shoulder Season"? April is a critical transition period in the industrial sect...
04/26/2026

Is Your Warehouse Prepared for the April "Shoulder Season"?

April is a critical transition period in the industrial sector. While outdoor temperatures are mild, humidity levels are beginning to spike. For facilities handling electronics, pharmaceuticals, paper goods, or sensitive raw materials, this is the most dangerous time for moisture-related damage.

From "Sweaty Slab Syndrome" to cardboard compromise and equipment corrosion, the risks are real.

In our latest blog post, we break down:
✅ The science behind the Dew Point Challenge.
✅ Strategies for Industrial Dehumidification.
✅ Why positive building pressure is your best defense.

Don't let spring moisture damage your assets. Read the full guide here:
🔗 https://www.airtrackhvac.com/hvac-maintenance-tips/managing-shoulder-season-humidity-in-large-scale-warehousing-and-logistics/

Need expert help calibrating your environmental controls? Get in touch with the AirTrack Team today:

📞 24 Hours & Emergencies: 905-330-4056
📧 Email: [email protected]
📍 Office: 16 Falconer Dr #5, Mississauga, ON L5N 3M1

Address

16 Falconer Drive #5
Mississauga, ON
ONL5N3M1

Telephone

+19053304056

Website

Alerts

Be the first to know and let us send you an email when Air Track Inc posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category