04/26/2022
ICF PRODUCTS
- We are a STOCKING Distributor and have stock of the following products available to ship to accommodate your schedule.
Amvic ICF Concrete Forms
- stay in place, 5-in-one concrete forming system incorporating structure, insulation, an air/vapour barrier and a finish attachment
- cost effective, resilient and environmentally friendly construction system
Amvic ICF R30
- we STOCK the higher performance ICF block with EPS panel thickness of 3.25” with highest R value, R30 giving you almost 50% more insulation
- available core sizes 6”& 8”
- universal, no top or bottom, no right side or wrong end
- patented FormLock interlock with improved integrated drainage channels
- 3 1/4” of dense foam on each side makes for a very strong form unit
Also available, ICF R22, panel thickness of 2.5”
- available core sizes of 4, 6, 8, 10 & 12”
ICF Specialty Screws
- 10 x 2”, 10 x 3” hex screws with flat washer
- personally designed by John Maguire
Ampex insulated radian floor heating panel
- rigid insulation, a vapour barrier and PEX tubing locking mechanism
- R10 type 2, 2’ x 4’ x 3.375” sheets
SilveRboard rigid board insulation
- R10, 2”, 2’ x 8’ sheets
Eco Deck
- expanded polystyrene SUSPENDED CONCRETE DECK
- comes in 8’ sections, thickness heights of 8”, 10” and 12”
- can span up to 30’ using a combination of reinforcement – wire mesh or rebar
- perfect for flat roofs, suspended slabs over garages, cold rooms & outside decks
Brick Ledge form reinforcement
- one piece, engineered, place and go, XElerator ledge reinforcing
Sloping Brick Ledge extension – eliminating the steps in the brickledge
- 8’ lengths
Engineered Joist pockets
- Individual floor joist pockets – eliminates rim board, joist hangers, ties systems and labour
- available in 2 & 4” widths
- personally designed by John Maguire
Anchor bolts
1/2” with nuts and washers
Tape
- 6” protective tape, 990’/roll
Rebar
10 & 15 ml steel rebar
Glass Fiberglass Rebar
- resistance to corrosion, high stiffness to weight ratio, lower labour and handling costs
- stronger shear & tensile strength
- 100% non-corrosive, 1/4 the weight of steel
- 10 & 15ml
Bracing/Scaffolding
- available for rent or purchase
- comes with base plate, turnbuckle and guardrail post assembly
- tall wall assembly available
- personally designed by John Maguire
Waterproofing
- 40ml peel and stick waterproof membrane - 225 sq/roll
Delta Wrap
8’ x 65’6” – 524 sq. ft.
Foam - Applicator
- 24 oz/can - low expansion foam – works in cold and wet weather
- economy plastic foam applicator gun or steel applicator available
Exterior finishing system
- fibre mesh and prep coat for exposed foundation finishing above the waterproofing to grade
