18/09/2026
🚨YOUR WATER PRESSURE IS WARNING YOU… ARE YOU LISTENING?
Your shower starts strong… then suddenly becomes weak. 🚿
Your tap keeps surging.
Your pump keeps switching ON and OFF.
Your water bill keeps going UP. 💸
Your meter keeps moving when EVERY TAP IS OFF.
👉DON’T JUST BLAME THE WATER SUPPLY.
Something could be wrong with your plumbing system and you could have a hidden underground water leak.
🚨WHY DOES YOUR WATER PRESSURE KEEP FLUCTUATING?
There isn't always one simple answer.
Your water pressure can be affected by:
💦 1. HIDDEN UNDERGROUND WATER LEAKS
A leaking pipe underneath your yard, driveway, floor slab or landscaped area may be losing water without leaving an obvious wet patch.
🚨 Watch out for:
• A water meter that moves when everything is OFF
• Unexplained high water bills
• Damp patches or unusually green vegetation
• Mould or moisture
• The sound of running water when nobody is using it
• A pump running more frequently than normal
The dangerous part? You may be losing water before you even know where the leak is.
🔍 That's why specialized underground leak detection equipment can help identify likely leak locations before unnecessary excavation.
💧2. CHANGES IN THE MAIN WATER SUPPLY
Municipal or shared water supply pressure can fluctuate because of:
• High demand
• Maintenance work
• Line repairs
• Intermittent supply
• Changes in reservoir levels
If several properties around you are experiencing the same problem, the issue may be upstream.
But if YOUR PROPERTY is the only one affected… it's time to investigate your internal water system.
🚰3. WATER TANK PROBLEMS
Is your tank running low?
A low tank level, faulty float valve, blocked outlet, damaged valve, sediment, rust or an undersized pipe can all affect your water flow.
A dirty tank can also allow **sediment, rust particles and biological buildup** to enter outlet lines and restrict the system.
🔧4. PUMP PROBLEMS
If your water pressure repeatedly rises and falls, your pump could be short-cycling.
Possible causes include:
⚠️ Incorrect pressure switch settings
⚠️ Failed pressure tank
⚠️ Low air charge
⚠️ Worn pump
⚠️ A leak causing the pump to run too often
⚠️ A pump that is too small for the property's demand
And please don't assume that simply installing a bigger pump will solve everything.
Pipe sizing, tank capacity, water demand and the actual pump performance all matter.
🔩5. FAULTY OR PARTLY CLOSED VALVES
A valve that isn't fully open can restrict water flow.
Check the:
• Main shutoff valve
• Tank outlet valve
• Isolation valves
• Pump valves
• Filter valves
• Irrigation valves
• Pressure-reducing valves
⚠️Never force a seized valve. Older valves can fail internally even when the handle appears to be fully open.
🚿 6. BLOCKED PIPES, FILTERS & FIXTURES
If only ONE TAP OR SHOWER has weak pressure, the problem may be local.
Mineral deposits, rust, pipe scale and debris can block:
• Showerheads
• Tap aerators
• Cartridges
• Flexible connectors
• Small isolation valves
If several fixtures in one section of the building are affected, a blocked branch pipe or faulty valve may be the problem.
Older galvanized steel pipes can also corrode internally and become increasingly narrow.
💨 7. AIR IN THE PIPES
Spluttering taps? 💦💨
Water coming out in bursts?
Vibration or irregular flow?
Air can enter plumbing after a water interruption, tank emptying, pipe repair or leak.
In pumped systems, persistent air can indicate a suction-side leak, poor pipe connection, faulty foot valve or insufficient water at the source.
⚠️ Pumps should not be allowed to run dry because this can damage internal components.
🚨 HERE'S WHEN YOU SHOULD STOP IGNORING IT:
Get professional assistance if fluctuating pressure is accompanied by:
🚨 Water pooling
🚨 Rapidly increasing water bills
🚨 A pump that won't stop running
🚨 Discoloured water
🚨 Sewer odour
🚨 Water backing up through drainage points
🚨 Severe pressure drops
🚨 Extremely high pressure
High pressure isn't necessarily good pressure.
Excessive pressure can damage appliance hoses, taps, toilet fill valves, filters and older pipe joints, while repeated pressure surges can shorten the life of your plumbing system.
🔎 BEFORE YOU DIG… INVESTIGATE.
One of the biggest mistakes property owners can make is breaking floors or digging up yards based on guesswork.
A professional inspection can assess:
✅ Supply pressure
✅ Static pressure
✅ Pressure under flow
✅ Water tank condition
✅ Pump performance and controls
✅ Valves
✅ Accessible pipework
✅ Possible underground water leaks
Where water loss is suspected, leak detection should come before major excavation.
💧 LEBA LEE MOSES SERVICES helps property owners investigate water problems through:
🔍 UNDERGROUND WATER LEAK DETECTION
🚰 WATER FAULT DETECTION
🔧 PLUMBING MAINTENANCE & REPAIRS
💦 WATER TANK CLEANING
📍 PIPELINE INSPECTION & INVESTIGATION
We use specialized equipment to investigate suspected underground water leaks and identify likely fault locations, helping reduce unnecessary digging and water loss.
💥 DON'T WAIT FOR THE LEAK TO SHOW ITSELF.
That weak shower.
That noisy pump.
That fluctuating pressure.
That unexplained water bill.
That meter that keeps moving.
Your water system may already be telling you something is wrong.
📞 CALL / WHATSAPP: 74207519 / 78111114
📧 EMAIL:[email protected]
💧LEBA LEE MOSES SERVICES
Your Number One Doctor to Detect Water Leakages.
