https://www.facebook.com/104325078450414/

Arcas Timber, Sydney (2026)

23/09/2021

𝙎𝙩𝙖𝙞𝙧𝙨: 𝙎𝙩𝙖𝙞𝙧 𝙩𝙧𝙚𝙖𝙙𝙨
Stair treads need to be slip resistant and extend across the full width of the stairway. The edge of treads should be visible against the background. Slip resistant nosings can be added to meet these standards. Treads must be solid if the stairway is more than 10 metres high or connects more than 3 stories.
Via Latham

the work was done a while ago for

21/09/2021

𝙎𝙩𝙖𝙞𝙧𝙨: 𝙁𝙡𝙞𝙜𝙝𝙩𝙨 𝙖𝙣𝙙 𝙡𝙖𝙣𝙙𝙞𝙣𝙜𝙨

The Australian standards for stairs and landings state that you can use a maximum of 18 stairs (risers) in a single flight. Flights can be connected using landings. A barrier, a landing 2+ metres in length or a change in the direction of the stairway of 90+ degrees needs to take place every 36 stairs.
Staircases must slope at an angle of 20° to 45°, but between 30° and 38° is recommended. Minimum headroom is generally 2 metres.
the work was done a while ago for

17/09/2021

𝙁𝙞𝙩𝙩𝙞𝙣𝙜 𝙥𝙚𝙧𝙛𝙚𝙘𝙩✨

13/09/2021

𝙒𝙤𝙧𝙠 𝙖𝙩 𝙝𝙚𝙞𝙜𝙝𝙩

Working at considerable heights, as a construction worker, comes with its own set of employee hazards – especially if certain height safety tips aren’t implemented as they should. Thus, with dozens of injuries occurring on a daily basis, forming part of one of the largest causes of workplace accidents, it’s important to ensure that certain work at height safety tips are implemented in order to receive peace of mind on site whilst employees are hard at work maintaining deadlines and delivering quality craftsmanship.

1. Conduct A Risk Assessment.
Prevention is better than trying to find a cure, in which case, it’s absolutely necessary (if not required by law in some instances) to conduct a thorough risk assessment of any possible trips and falls, hazards related to chemicals being used, as well as possible special precautions which need to be taken in order to keep the public safe. Record your findings and figure out how to reduce any of the risks mentioned-above in order to create a safer work environment.

2. Locate Access Routes.
When working at heights, it’s crucial to assess any access routes in order to prevent unnecessary accidents – planning out safe routes in order to conduct the work necessary to complete the job. Employees need to be able to move easily between certain points on the construction site without having to work at considerable heights if at all possible.

3. Inspect Height Safety Equipment.
Of course, as any construction worker would know, you have to inspect your height safety equipment such as your construction safety harness prior to use as well as after the end of a long shift – ensuring that each element is in proper working condition according to the manufacturer’s standards. If not, you may find yourself in a tricky situation at a considerable height, putting your own life in danger as well as the lives of those who need to come to your rescue.

Via Anchored Height Safetely

This was an job ✅

11/09/2021

One of the most important things when working on finished locations is preserving the condition of the property.

For this reason, always when working on finished houses, everything that can be ruined must be protected.

Working for

08/09/2021

𝘾𝙤𝙣𝙘𝙧𝙚𝙩𝙚 𝙎𝙡𝙖𝙗 𝙛𝙤𝙪𝙣𝙙𝙖𝙩𝙞𝙤𝙣

The foundation that your house is built on can have a major impact on the structural integrity of your home. A slab foundation is made of concrete that is typically 4"–6" thick in the center. The concrete slab is often placed on a layer of sand for drainage or to act as a cushion. Houses built on a slab lack crawlspaces, and there is no space under the floor.

The picture was taken working for

04/09/2021

𝙏𝙮𝙥𝙚𝙨 𝙤𝙛 𝙬𝙖𝙞𝙣𝙨𝙘𝙤𝙩𝙞𝙣𝙜
There are 5 different types that you might want to consider before you make your selection.

𝑹𝑨𝑰𝑺𝑬𝑫 𝑷𝑨𝑵𝑬𝑳: This style is classified by the panels being in front of the styles and rails. The result is that the panels look like they’re raised.

𝑭𝑳𝑨𝑻 𝑷𝑨𝑵𝑬𝑳: Flat panel wainscoting has panels behind the styles and rails, making it look flatter and deeper than raised panel wainscoting.

𝑩𝑬𝑨𝑫𝑩𝑶𝑨𝑹𝑫: This is made up of narrow, vertical boards that are put together using a tongues and grooves system.

𝑶𝑽𝑬𝑹𝑳𝑨𝒀: This style combines flat panel and raised panel by installing flat panels first and then installing additional panels in the center of those flat panels.

𝑩𝑶𝑨𝑹𝑫 𝑨𝑵𝑫 𝑩𝑨𝑻𝑻𝑬𝑵: This style is basically flat panels, but it’s distinctive because it uses vertical boards to cover seams or styles. The additional boards are called battens, hence the name.

The fit out work was done by

01/09/2021

𝙒𝙖𝙞𝙣𝙨𝙘𝙤𝙩𝙞𝙣𝙜: fancy detail that makes the difference

Wainscoting is a raised panel originally used as a functional wall covering to keep out cold and moisture. This architectural element dates back to the 16th century, Europe.🏛️

Nowadays we use these panels purely as a decorative wall accent. It usually rises to around the height of a chair rail and helps make the room a little cozier and more aesthetically pleasing. This wall detail can be installed in any room.

I love how these decorative panels can add an interesting architectural detail to your home. These panels are usually made of wood and can be used exclusively for design, to cover damage, or to enhance the insulation of the room.

The fit out work was done by

30/08/2021

𝙎𝙤𝙢𝙚 𝙤𝙛 𝙩𝙝𝙚 𝘼𝙙𝙫𝙖𝙣𝙩𝙖𝙜𝙚𝙨 𝙤𝙛 𝙒𝙞𝙣𝙙𝙤𝙬𝙨 🏠

Safety and Security

You would definitely need an aperture for air and light in your home, but without a proper window, it is just an opening that can let unwanted elements into your home. Windows can be locked and can offer a great deal of safety. However, remember that jemmying windows that aren’t well-maintained can be quite easy. So, always opt for made-to-measure windows, and maintain them well to boost the security of your home.

Via Fanesta

Thanks to for the opportunity of working in this kind of works

25/08/2021

𝙎𝙤𝙢𝙚 𝙤𝙛 𝙩𝙝𝙚 𝘼𝙙𝙫𝙖𝙣𝙩𝙖𝙜𝙚𝙨 𝙤𝙛 𝙒𝙞𝙣𝙙𝙤𝙬𝙨 🏠
Efficiency
With advancements in technology, homeowners now have the options to choose uPVC windows for their homes. These windows offer a lot of advantages. They are easy to maintain and eliminate draughts into a room since they are specially made to order, but the best advantage of these windows is that they are very energy efficient. During the summers, they keep the heat outside the home, and in winters they retain the heat inside, which also helps a lot in lowering electricity bills.
Via Fanesta

Thanks to for the opportunity of working in this kind of works

23/08/2021

𝙎𝙤𝙢𝙚 𝙤𝙛 𝙩𝙝𝙚 𝘼𝙙𝙫𝙖𝙣𝙩𝙖𝙜𝙚𝙨 𝙤𝙛 𝙒𝙞𝙣𝙙𝙤𝙬𝙨 🏠

They Offer a Lot of Conveniences

It depends on where they are placed, but windows offer a lot of convenience to the residents of a home. For example, a window in the kitchen will let any hot air, smoke, or even odours escape without any hassle. In bathrooms, on the other hand, a window can facilitate the release of steam and can also help in drying the bathroom faster. If you wish to enjoy the light breeze outside but want to read a favourite book in the light of the living room, a window (with an insect mesh, preferably) will let you do just that.

Via Fanesta

Thanks to for the opportunity of working in this kind of works

18/08/2021

𝘿𝙤𝙤𝙧𝙠𝙣𝙤𝙗🚪
Some important factors as well that have a substantial effect in helping you decide which doorknob is more appropriate to select:

1- Select the style, shape, colour and finish of the doorknob amply.
Before going through any of the factors when purchasing the doorknobs, the first and most important thing you need to look out for is the design of the doorknob. At first, you need to see what type of doorknob you want. Doorknobs can offer you a massive collection of style and shape to select from, so you need to pick the one that looks classy but easy to handle. After selecting the style, you need to look for the colour that goes with the interior or in contrast with your door and other furniture. There are surely so many shades available as well so pick the colour wisely.

After selecting the style and colour, you must look for the finish of the doorknobs. There are many options for you to browse like matt finish and antique finish. Do your research which is the best and then make the selection accordingly.

2- Do not ignore the aspect of safety and security
3- Make Sure your selection provides adequate privacy.
4- Ensure your selected doorknob does not go far beyond your budget.
5- Check whether it offers ease of use.

Via Decor&Decor

Working for the boss

Arcas Timber

23/09/2021

21/09/2021

17/09/2021

13/09/2021

11/09/2021

08/09/2021

04/09/2021

01/09/2021

30/08/2021

25/08/2021

23/08/2021

18/08/2021

Address

Website

Alerts

Shortcuts

Share

Category