What are the opening hours?

Monday 8am - 5pm Tuesday 8am - 5pm Wednesday 8am - 5pm Thursday 8am - 5pm Friday 8am - 5pm

Resinject

Subsidence and Structural Repair Specialists. Over 100 years combined experience. 400+ ⭐️⭐️⭐️⭐️⭐️ Google Reviews.

01/06/2026

🤠Sinking slabs. Bouncing loaders. Feed getting wet.

This feed bay entrance had dropped up to 174mm, rainwater was pouring in, slabs were out of line, and the front-end loader was losing loads every time it crossed.

✅ Resinject fixed it with RSJ170 engineered resin, strengthening the ground and lifting the slabs back to level by filling the voids beneath them.

The result? 🔹 Slabs lifted back to level 🔹 No more water running into the bay 🔹 Smooth, safe surface for the loader 🔹 Ground strengthened to stop future movement
All done in-situ, no excavation, no demolition, no downtime. 💪

📞 1300 091 441 🌐 www.resinject.com.au ✉️ [email protected]

Agriculture

21/05/2026

Ground conditions strengthened using our RSJ170 engineered resin technology.
This before-and-after comparison shows structural movement and post injection stabilisation results.

18/05/2026

Big shout out to the Resinject team, we've once again maintained our certification across ISO 9001, ISO 14001 and ISO 45001 (quality, environment, and health & safety).

Behind this is the day-to-day work our crews put in on every site and project. Doing things properly, looking after each other, and keeping our impact in check.

For our clients, it means peace of mind, knowing you're working with a team that backs up the technical side with the right systems, processes and accountability.

Proud of what the team continues to deliver.

14/05/2026

Keeping customers safe and sites operational. 👷‍♂️⛽

Resinject recently completed slab levelling works at this fuel station, removing dangerous trip hazards and restoring a safer, smoother surface with minimal disruption.

06/05/2026

Emergency Slab Stabilisation Beneath Production Line

Voiding and loss of sub-slab support beneath the main production line forced a temporary shutdown on safety grounds. Resinject was engaged to deliver emergency void filling and structural re-support, restoring load-bearing capacity beneath the operating footprint. Works were executed outside production hours to eliminate downtime and maintain continuity of output. The production line was returned to full operation within 8 hours of works commencing, minimising disruption and reinstating structural integrity without impacting operations.

05/05/2026

Resinject’s RSJ170 was injected beneath the slab supporting this post, expanding to fill voids and densify the soil. As it expands, it creates controlled lift, raising the slab, then the post, and finally re-seating the beam.

Key point: we didn’t force the structure up, we restored the ground it depends on.

Fix the support, and the structure follows.

03/05/2026

Sunken slabs? We strengthen the ground and lift slabs back to their original levels.

Resinject uses precision resin injection to raise and level slabs, no heavy demolition, less downtime, and a clean finish.

Pathways. Patios. Pool Surrounds. Residential and commercial properties . Fixed ✅

28/04/2026

Resinject stabilised and re-levelled critical AGL infrastructure using its RSJ170 engineered resin solution. Facing subsidence and structural misalignment, traditional repair methods were deemed costly and disruptive. Instead, a non-invasive deep injection approach was used to strengthen underlying soils, fill voids, and lift concrete plinths with millimetre precision. Completed in just three days during a planned shutdown, the project restored structural integrity, improved safety, and delivered a cost-effective, long-term solution with minimal operational disruption. 🌳🌱

22/04/2026

🚧 We’re at the 2026 IPWEA NSW & ACT State Conference! 🚧

The Resinject team is excited to be exhibiting this week, 22–24 April, connecting with public works professionals from across NSW and the ACT.

Swing by Booth 15 to chat with our team about how resin injection technology is solving weak ground challenges — faster, with less disruption and better long-term outcomes.

👉 Come and say hello at Booth 15!

15/04/2026

Sunken path? Don’t rip it out, lift it back into place 🔧⬆️

Resinject’s RSJ170 engineered resin is a fast, clean, and cost-effective way to raise and re-level concrete slabs that have settled over time. Instead of demolition, small holes are drilled and Resinjects RSJ170 resin is injected underneath. As it expands, it gently lifts the path back to their original position.

✨ No major digging
✨ Minimal disruption
✨ Ready to use the same day

If your front path or entryway is uneven, it’s not just an eyesore — it can be a safety hazard too. Resin injection fixes the problem quickly without the mess of replacement.

Got sunken concrete? Let’s lift it right the first time 👍

Address

Newcastle, NSW

Opening Hours

Monday	8am - 5pm
Tuesday	8am - 5pm
Wednesday	8am - 5pm
Thursday	8am - 5pm
Friday	8am - 5pm

Telephone

(02) 49598361

Website

http://www.resinject.com.au/

Alerts

Be the first to know and let us send you an email when Resinject posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Resinject:

Shortcuts

Address
Telephone
Opening Hours
Alerts
Contact The Business
Claim ownership or report listing

Want your business to be the top-listed Contractor in Newcastle?