High Demand Electrical Level 2 Electrician

Directions Website Contact the business

High Demand Electrical Level 2 Electrician ๐—ฆ๐˜†๐—ฑ๐—ป๐—ฒ๐˜† ๐—Ÿ๐—ฒ๐˜ƒ๐—ฒ๐—น ๐Ÿฎ ๐—˜๐—น๐—ฒ๐—ฐ๐˜๐—ฟ๐—ถ๐—ฐ๐—ถ๐—ฎ๐—ป๐˜€
Your 24/7 emergency level 2 electricians! Contact us today for expert electrical support.

High Demand Electrical is your trusted specialist for Level 2 ASP electrical services across Sydney. Operating 24/7, we are renowned for delivering reliable and efficient electrical solutions, accredited by both Ausgrid and Endeavour Energy. Our team of certified Level 2 ASP electricians offers comprehensive services, including overhead and underground installations, switchboard upgrades, and advanced metering solutions. Partnering with all major energy providers, we ensure safe, compliant connections and disconnections. Whether you need power pole installations, consumer mains, or emergency repairs, we are committed to providing top-notch service Sydney-wide.

15/10/2026

If Iโ€™m already on site, Iโ€™ll always point out what else needs attention

This one had old 6mm copper cable running in, rated to 40 amps, and the usual size should be 16mm

I let the customer know there was an opportunity to run a bigger cable and move from two-phase to three-phase while the work was already happening

That way, if they want to do it now, theyโ€™re not paying to do it up twice

Three-Phase Overhead Connection with Bucket Truck in Dural, NSW๐Ÿšจ Why We Were CalledA property in Dural, NSW needed a thr...
15/10/2026

Three-Phase Overhead Connection with Bucket Truck in Dural, NSW

๐Ÿšจ Why We Were Called
A property in Dural, NSW needed a three-phase overhead connection made to a private pole. The pole height required a bucket truck to complete the connection safely. A licensed Level 2 ASP electrician in Sydney with an elevated work platform was needed.

๐Ÿ› ๏ธ What We Did
โœ… Attended site with bucket truck and reviewed all materials supplied on site
โœ… Sourced and installed the missing Q hook for the asset pole connection
โœ… Installed 30m of three-phase 25mm ALOH overhead service mains to the private pole
โœ… Prepped and connected at the top of the pole, tested at MSB and confirmed all phases operational

๐Ÿ“Š Results
The three-phase overhead connection was completed safely using a bucket truck. All phases were confirmed operational at the MSB and the lockable MSB was secured on completion.

Need a three-phase overhead connection requiring a bucket truck in Sydney? High Demand Electrical are licensed Level 2 ASP electricians with elevated work platform capability across NSW. Get in touch today.

Garage Sub-Board Isolation in Catherine Field, NSW๐Ÿšจ Why We Were CalledA property in Catherine Field, NSW needed the gara...
14/10/2026

Garage Sub-Board Isolation in Catherine Field, NSW

๐Ÿšจ Why We Were Called
A property in Catherine Field, NSW needed the garage sub-board safely isolated and the feed labelled and capped. A licensed electrician in Sydney was needed to disconnect the circuit and make the installation safe.

๐Ÿ› ๏ธ What We Did
โœ… Tested voltage at the garage sub-board and confirmed it was live
โœ… Located the garage feed at the main switchboard and disconnected from its circuit breaker
โœ… Labelled the cable and bridge plate capped the end
โœ… Tested the garage to confirm supply was isolated. Job complete in 20 minutes

๐Ÿ“Š Results
The garage sub-board was safely isolated and capped in 20 minutes. The circuit was labelled and the installation left safe and compliant.

Need a sub-board isolated or a circuit safely disconnected at your Sydney property? High Demand Electrical are licensed electricians in Sydney across NSW. Get in touch today.

Underground Pillar Connection & New Meter in Wilton, NSW๐Ÿšจ Why We Were CalledA new connection was required at a property ...
14/10/2026

Underground Pillar Connection & New Meter in Wilton, NSW

๐Ÿšจ Why We Were Called
A new connection was required at a property in Wilton, NSW with underground works and a board already completed by the on-site electrician. A licensed Level 2 ASP electrician in Sydney was needed to connect to the underground pillar and commission the new meter.

๐Ÿ› ๏ธ What We Did
โœ… Attended site and stripped the cable inside the underground pillar
โœ… Connected to the rubix cube connector at the pillar
โœ… Energised the supply and tested at the MSB
โœ… Tagged and labelled the board. Job complete in 1.5 hours

๐Ÿ“Š Results
The new connection was made at the underground pillar and the meter commissioned in a single visit. The board was tagged, labelled, and confirmed operational before leaving.

Need an underground pillar connection or new meter commissioned at your Sydney property? High Demand Electrical are licensed Level 2 ASP electricians across NSW. Get in touch today.

Impact Damage Light Reinstatement in Beaumont Hills, NSW๐Ÿšจ Why We Were CalledA light fitting in a child's bedroom at a ho...
13/10/2026

Impact Damage Light Reinstatement in Beaumont Hills, NSW

๐Ÿšจ Why We Were Called
A light fitting in a child's bedroom at a home in Beaumont Hills, NSW had detached from the ceiling and was hanging with exposed wires after an unknown object hit the house. Urgent make safe was needed with potential rain threatening further damage.

๐Ÿ› ๏ธ What We Did
โœ… Attended site urgently and inspected the roof tiles for damage or holes
โœ… Found no roof damage and identified that poor clips on the light fitting had caused it to fall from vibrations
โœ… Tested power on the cable to confirm it was safe
โœ… Reinstalled the light fitting securely and tested for correct operation

๐Ÿ“Š Results
The light fitting was safely reinstalled and the ceiling confirmed undamaged in a single urgent visit. The homeowner had peace of mind that no further damage had occurred and the room was safe to use.

Got a fallen light fitting or electrical safety concern at your Sydney home? High Demand Electrical are licensed electricians in Sydney available 24/7, rain, hail or shine. Get in touch today.

13/10/2026

Just sticking this pole in and making sure itโ€™s set right

Weโ€™re checking the levels, getting enough concrete in around it, and making sure the setting is solid before we move on

This oneโ€™s about getting more clearance over the driveway, so the overheads arenโ€™t sagging through the middle of it

The rafter bracket sets the pole back a bit, which helps create that extra height for larger vehicles coming through

Pool Circuit Fault Diagnosis in Engadine, NSW๐Ÿšจ Why We Were CalledA homeowner in Engadine, NSW had a pool RCBO that kept ...
13/10/2026

Pool Circuit Fault Diagnosis in Engadine, NSW

๐Ÿšจ Why We Were Called
A homeowner in Engadine, NSW had a pool RCBO that kept tripping. A licensed electrician in Sydney was needed to find the cause and restore safe power to the pool equipment.

๐Ÿ› ๏ธ What We Did
โœ… Attended site and found the pool RCBO tripped in the sub-board in the pool room
โœ… Removed every plug from the pool room power points and tested each appliance individually
โœ… Identified the filter pump as the cause of the tripping
โœ… Tested all other power points and appliances. All confirmed safe with positive IR readings

๐Ÿ“Š Results
The pool circuit fault was traced to a faulty filter pump in under an hour. All other circuits confirmed safe. The homeowner had a clear diagnosis and could arrange filter pump replacement.

Got a pool circuit tripping at your Sydney home? High Demand Electrical are licensed electricians in Sydney diagnosing pool electrical faults fast across NSW. Get in touch today.

Power Logger Installation & Collection at Medical Centre in Hammondville, NSW๐Ÿšจ Why We Were CalledA medical centre in Ham...
12/10/2026

Power Logger Installation & Collection at Medical Centre in Hammondville, NSW

๐Ÿšจ Why We Were Called
A medical centre in Hammondville, NSW had a meter fail due to overloading. A licensed electrician in Sydney was needed to install a power logger and monitor the electrical load over one week to identify the source of the overload.

๐Ÿ› ๏ธ What We Did
โœ… Located the main switchboard and installed the power logger with voltage clamps and current loops on all incoming mains
โœ… Set the logger to monitor for one week and secured the board with a lock
โœ… Returned one week later to remove the logger and retrieve all recorded data
โœ… Delivered seven days of power consumption data across all phases for analysis

๐Ÿ“Š Results
Seven days of power consumption data was captured across all phases. The medical centre now has the information needed to identify the source of overloading and prevent future meter failures.

Got an overloading issue or unexplained meter failure at your Sydney commercial or medical facility? High Demand Electrical are licensed electricians in Sydney providing power quality monitoring across NSW. Get in touch today.

Ausgrid Defect Clearance at Medical Centre in Menai, NSW๐Ÿšจ Why We Were CalledA medical centre in Menai, NSW had outstandi...
11/10/2026

Ausgrid Defect Clearance at Medical Centre in Menai, NSW

๐Ÿšจ Why We Were Called
A medical centre in Menai, NSW had outstanding Ausgrid electrical defects that needed clearing. The consumer mains were incorrectly terminated and the switchboard needed reconfiguring to meet network requirements before a compliance certificate could be issued.

๐Ÿ› ๏ธ What We Did
โœ… Removed old front-wired fuses and relocated consumer mains to the correct active links
โœ… Extended the neutral using a jumbo connector and removed the old neutral link
โœ… Wired in new tails to the fuse, labelled and tested the board
โœ… Issued a Certificate of Electrical Work and provided all Ausgrid defect clearance documentation

๐Ÿ“Š Results
All Ausgrid defects were cleared in a single early morning visit. The medical centre received full compliance paperwork to close out the defect with the network.

Got an Ausgrid defect notice on your Sydney property or business? High Demand Electrical are licensed Level 2 ASP electricians clearing defects fast across NSW. Get in touch today.

11/10/2026

That white cableโ€™s had enough sun on it

You can see the outer layer starting to break down, and once that happens the insulation underneath is exposed

If both cables are worn and sitting close together, they can start arcing or sparking under load

Thatโ€™s the sort of thing Iโ€™d rather catch early than wait until it turns into a bigger job and a power issue at the house

Address

1 Macquarie Place Level 36
Newcastle, NSW
2000

Alerts

Be the first to know and let us send you an email when High Demand Electrical Level 2 Electrician posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to High Demand Electrical Level 2 Electrician:

Shortcuts

Share

Category