Workzone Handyman Services

Workzone Handyman Services Carpentry, Decks, Painting, door hanging, architraves basic cabinetmaking, general repairs etc.

Before & AfterClient needed a door jamb and new door put on their mini reno of garage. Client had already painted the ja...
02/06/2026

Before & After
Client needed a door jamb and new door put on their mini reno of garage. Client had already painted the jamb and door in a brilliant yellow which I think contrasts the metal sheeting really well. Client very happy!

Client wanted to add a door into the ensuite. I needed to add a door jamb to create a rebate for the door. Once the fram...
14/05/2026

Client wanted to add a door into the ensuite. I needed to add a door jamb to create a rebate for the door. Once the frame was fitted installed the door which needed some trimming here and there, then installed the handle and gave two coats of a colour match from existing walls. Client wanted it to match the walls.

Client wanted a little refresh for the dental surgery. I made a custom made shelving unit in white melamine to utilise t...
14/05/2026

Client wanted a little refresh for the dental surgery. I made a custom made shelving unit in white melamine to utilise the corner, took away a few excess hooks and screws that weren’t being used and patched, painted the dark blue wall in dulux natural white and gave the rest of walls a quick coat as well. Just some simple changes but effective!

Client wanted to have their stairs replaced due to weathering and rot. Few steps were quite bad and needed replacing so ...
08/05/2026

Client wanted to have their stairs replaced due to weathering and rot. Few steps were quite bad and needed replacing so we just replaced them all. Refreshed the stringers by sanding back and then gave the stringers and steps three coats of Cabot’s decking and stair paint!! Also added another handrail otherside in Merbau to match existing.

Client wanted to replace all the palings of their gate due to deterioration and aging but also wanted a more modern look...
23/04/2026

Client wanted to replace all the palings of their gate due to deterioration and aging but also wanted a more modern look. Still using the existing steel frame I used an angle method which means I could hide all the fixings from the inside eliminating the use of putty leaving a very clean finish for the exterior street side.

Client recently had their water heater replaced and also lifted from original height to help with potential maintenance ...
15/04/2026

Client recently had their water heater replaced and also lifted from original height to help with potential maintenance and servicing. They needed the frame extended and with left over decking boards covered to hide water heater. Client was very happy!

Client wanted some custom made bookshelves made between their fireplace. Custom made on site we also put in v groove pan...
06/02/2026

Client wanted some custom made bookshelves made between their fireplace. Custom made on site we also put in v groove panelling as a feature wall. Client will be painting and when finished will send finished photos. Stay tuned!!

Small step repair with the addition of step treads. Client wanted bottom step related and Ali wanted to add step treads ...
04/02/2026

Small step repair with the addition of step treads. Client wanted bottom step related and Ali wanted to add step treads to hide all the chipped step treads over all the steps. Lucky they had spare tiles 😜

Client wanted to redo their pool landing and step using 140 & 90 mm merbau. After the removal of old decking we needed t...
04/02/2026

Client wanted to redo their pool landing and step using 140 & 90 mm merbau. After the removal of old decking we needed to lift height so it finished level with pool coping. It took some work to level and straighten the existing frame but in the end it all worked out well.

Recently coated this timber cutek extreme 50 with rustic gold colourtone , look at the beads of water.
02/02/2026

Recently coated this timber cutek extreme 50 with rustic gold colourtone , look at the beads of water.

Address

PO Box 262
Concord, NSW
2138

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm
Saturday 9am - 5pm
Sunday 9am - 5pm

Website

Alerts

Be the first to know and let us send you an email when Workzone Handyman Services posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Workzone Handyman Services:

Shortcuts

Share

Category