Concrete Creations Ballarat

Concrete Creations Ballarat Concrete Creations Ballarat is a local business specializing in all things concrete, from the simple grey to polished and exposed.

Another civil and concrete package currently being completed by the CCE team in Geelong.This scope has involved a substa...
28/07/2026

Another civil and concrete package currently being completed by the CCE team in Geelong.

This scope has involved a substantial site cut along with retention works to both boundaries at the rear of the property. This will lead into bored piers and strip footings for the subfloor and finally carpark and paving works.

Projects like this are a good example of where having excavation and concrete capabilities within the one team really works well, allowing us to manage the site from the initial cut through to the detailed structural concrete works.

A great result from the team so far and another Geelong project taking shape.

We’ve been lucky enough to be involved in some interesting projects over the years and this one is right up there. A ter...
24/07/2026

We’ve been lucky enough to be involved in some interesting projects over the years and this one is right up there. A terraced seating project completed from footing excavation to the final back filling and compaction. Our scope included all concrete elements including walls, stairs, suspended slab, terraced seating ect as well as water proofing, backfilling and compaction. This project has tested us, throwing some really interesting access, staging and logistics problems at us along the way which we have managed to over come. I personally am really happy with the final result and really proud of everyone that has been a part of the project so far

We are available to pick up additional projects between now and the 17th of March. Supplying Ballarat, Geelong and weste...
21/02/2025

We are available to pick up additional projects between now and the 17th of March. Supplying Ballarat, Geelong and western Melbourne and specialising in (but not limited too 😉) Commercial and industrial projects, Concrete creations has some holes in our upcoming schedule. Whether you’re looking for a full supply and install package, place and finish, excavation ect we have your project covered from start to finish. If you’re looking for detailed excavation then we have you covered with our excavator and positrack combo; If it’s precision you’re after then we have our own in house Leica icr80 total station for hardstand mapping, steel and formwork set out /checks, base prep ect and if it’s a flawless finish you’re looking for then our ride on trowel machines and experienced operators will take care of that.

Some recent photos from our Oztenpin stage 2 project for MKM constructions in Ballarat. Approximately 3000m2 of internal...
28/01/2025

Some recent photos from our Oztenpin stage 2 project for MKM constructions in Ballarat. Approximately 3000m2 of internal burnished warehouse (unfortunately no photos) and 3000m2 of external car park and roadway. The video towards the end of the slides gives a little sneak peak into our finishing process, we generally like to pan our external slabs as well (whether that be with a walk behind or ride on). The final slide shows a few of the surfaces created using our total station for this project. Using this we can check 3D cut/fill levels, set offsets for base prep, set height pins for our pours as well as boxing lines and even check ponding/water retention onsite.

What a week! has been on my bucket list since I first started labouring in this industry 10+ years ago and it certainly...
24/01/2025

What a week! has been on my bucket list since I first started labouring in this industry 10+ years ago and it certainly lived up to all my expectations. For anyone in Australia interested in going I would highly recommend and this is why: Being my first WOC and heading over by myself I was a little apprehensive and unsure of what to expect but I needn’t be! The badge collection was easy, all halls and exhibits were labelled well and the app allowed you to find any product or exhibitor you were interested in. The biggest thing that I personally got out of the event was the education! As we all know, education in our sector of construction is light on at best in Australia, most people are governed by what their bosses have taught them and maybe some online research and further education is either expensive or simply not available. I enrolled in 15 hours worth of seminars and courses which included anything from specialist flat floor work to business and employee management, mix design, general concrete troubleshooting shooting (obviously with a few different processes and products than we use back home and most classes taught in imperial measurements 😝) ect and there were plenty more available. Everything was taught by industry professionals who were all happy to stick around and answer questions after the sessions. The 65000m2 of equipment exhibits was also very impressive, all the big players were there as well as new and innovative technology! Once again, if you are considering it then just do it!

A couple more slabs from our maxitrans redevelopment project. The first set of photos is from 2 seperate 3 pit robotic w...
19/05/2024

A couple more slabs from our maxitrans redevelopment project. The first set of photos is from 2 seperate 3 pit robotic welding stations and the second set is for a new blast booth. The base of the large sunken section needed full with I-beam placed at 2m intervals and poured insitu for the floor system to be mounted and welded to. Once again we were able to obtain drawings for total station to ensure each component of the various slabs were within the specified tolerances.

A sneak peak of a project we completed late last year at Maxitrans Ballarat for their redevelopment. This involved the i...
19/05/2024

A sneak peak of a project we completed late last year at Maxitrans Ballarat for their redevelopment. This involved the installation of 4 base slabs for new paint spray booths. Our scope included the detailed excavation, reinforcement design and steel fixing, culvert supply and installation, formwork and concrete placement. Working with maxitrans in house engineers we were supplied with a detailed CAD/DXF file for our total station so we could accurately map and layout everything from excavation lines to ensure wall thickness to steel locations, culvert and formwork placement and more all in relation to current shed column and roadway layout.

Concrete creations are looking for new members to join our team. We are looking for motivated individuals that enjoy wor...
20/02/2023

Concrete creations are looking for new members to join our team. We are looking for motivated individuals that enjoy working in a team environment. Successful candidates must have the minimum experience stated above, have reliable transport, a great attitude towards work and life as well as a want to learn and grow with our company. Successful candidates will be guaranteed consistent fulltime employment, competitive hourly rates and a safe respectful work environment.

Civil prep, kerb and External hardstand works completed at our Melton AV project over the last couple of weeks. This one...
18/08/2022

Civil prep, kerb and External hardstand works completed at our Melton AV project over the last couple of weeks. This one has come up a treat, another great job by all involved.

On a side note we are still looking for quality concreters and skilled labourers to join our team, so if you know anyone who fits the above criteria and are looking for work or a change of scenery point them in our direction.

WE ARE HIRING! Much the same as everyone else 😅 Having been awarded a higher volume of work than originally anticipated ...
13/07/2022

WE ARE HIRING! Much the same as everyone else 😅 Having been awarded a higher volume of work than originally anticipated for the months of July, August and September we are looking to add a few extra members to our current core group. Vacant positions include 2 x experienced concreters with a role available as a foreman for the right candidate, 2 x skilled labourers as well as a position available for an experience machine operator. Work is based predominantly between Ballarat and Melbourne with occasional regional work, all work is Commercial concrete and excavation largely based around Ambulance/fire stations, sports pavilions and childcare’s as well as warehouses. All positions are full time on wages and rates are negotiable based on experience as well as attitude and work ethic. If you’re are interested please call Jesse on 0400855470 and/or forward your resume and cover letter to [email protected]

Address

Ballarat, VIC
3356

Website

Alerts

Be the first to know and let us send you an email when Concrete Creations Ballarat posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Concrete Creations Ballarat:

Shortcuts

Share

Category