JJ Bell Carpentry Armidale

JJ Bell Carpentry Armidale Local carpentry and home maintenance service. High quality work and affordable. Based in Armidale NSW

Building wardrobes and starting to put on the first trim details. Probably got over 200lm of custom made cover strips to...
10/06/2026

Building wardrobes and starting to put on the first trim details. Probably got over 200lm of custom made cover strips to do. We will be making all the trim for this project on site from decking and flooring.

I'm told this crate contains two kitchens and two vanity units. Should keep me busy for the next few weeks. Flooring is...
26/05/2026

I'm told this crate contains two kitchens and two vanity units. Should keep me busy for the next few weeks. Flooring is all done and walls should be done this week.

This week I have been putting down Black Butt flooring in the duplex build. Got the main room of unit 2 done. It's looki...
16/05/2026

This week I have been putting down Black Butt flooring in the duplex build. Got the main room of unit 2 done. It's looking good, next week I should get the other 3 rooms done.

I designed and built this garden shed, including the doors. Quite a bit of the building is made of recycled materials.
09/05/2026

I designed and built this garden shed, including the doors. Quite a bit of the building is made of recycled materials.

Getting to the satisfying part of the build now where all the hardwork starts to become the finished product. Outside is...
27/04/2026

Getting to the satisfying part of the build now where all the hardwork starts to become the finished product. Outside is 95 percent done and the ceilings are going in!! Mossy has done a fantastic job on the details outside, now it's down to me to make the inside pop.

The roof flashings are all done, moving onto colorbond walls. Cold cut saw making the cuts a bit easier and cleaner.
15/04/2026

The roof flashings are all done, moving onto colorbond walls. Cold cut saw making the cuts a bit easier and cleaner.

Almost done on the roof. Today was fitting the barge caps and doing Scribe cuts on all the ridge flashings.
14/04/2026

Almost done on the roof. Today was fitting the barge caps and doing Scribe cuts on all the ridge flashings.

I mostly like finish carpentry but yeah, wouldn't say it's my strength, so many angles and even 1mm error stands out. In...
04/04/2026

I mostly like finish carpentry but yeah, wouldn't say it's my strength, so many angles and even 1mm error stands out. In this case prehaps I'm leaning on the painter a bit hard.

The build is coming along, getting closer to lock up. I've been busy making custom window reveals and helping out with t...
27/03/2026

The build is coming along, getting closer to lock up. I've been busy making custom window reveals and helping out with the facia system install. Looks pretty tidy.

These bench tops were destined for the dump so I repurposed them into very heavy shelf unit. Got to make some dados with...
06/03/2026

These bench tops were destined for the dump so I repurposed them into very heavy shelf unit. Got to make some dados with the router and will see it the polyurethane glue alone will hold them together.

Address

Armidale, NSW
2350

Telephone

+61487407758

Website

Alerts

Be the first to know and let us send you an email when JJ Bell Carpentry Armidale posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to JJ Bell Carpentry Armidale:

Shortcuts

Share

Category