Gleitbau GmbH

Gleitbau GmbH Outstanding solutions in formwork engineering Zeitsparende, wirtschaftliche Lösungen, die in enger Abstimmung mit dem Kunden gefunden und umgesetzt werden.

Im doppelten Sinn des Wortes "herausragende" Lösungen der Schalungstechnik sind der tragende Leitgedanke der Gleitbau Salzburg. Für kleine, einfache Projekte genauso wie für große, komplexe Bauwerke. Die Klientel reicht vom Bauherrn / Architekten über den Generalunternehmer bis zur Baufirma. Die Kunden der Gleitbau Salzburg vertrauen auf fachspezifische Erfahrung aus annähernd fünf Jahrzehnten internationaler Tätigkeit. Die daraus gewonnenen Verbesserungen und Innovationen finden Eingang in die tägliche Arbeit sowohl in Planung und Konzeption als auch Ausführung vor Ort. Ein Kompetenzvorsprung, der oftmals die Umsetzung von gestalterischen, planerischen Visionen der Kunden überhaupt erst ermöglicht hat. Ob durch die Entwicklung neuer Schalungstechniken oder spezifischer Anwendungsideen. Als Spezialunternehmen für Schalungstechnik und Hubbau integriert die Gleitbau Salzburg dabei ihr praxisgefestigtes Wissen aus den Bereichen Bauingenieurwesen und Maschinenbau. In jeder Projektphase wird die Arbeit auf Bereiche wie Statik, Betonbau oder Baulogistik abgestimmt. Alle Aspekte im Projektablauf, der Baustelleninfrastruktur und weiterer wesentlicher Bereiche werden unter Berücksichtigung aller Schnittstellen koordiniert. Die Auswahl der jeweils am besten geeigneten Baumethodik verschafft dem Klienten bedeutende ökonomische Vorteile. Aus diesem Grunde ist die Einbindung der Gleitbau-Ingenieure bereits in der Projekt-Vorphase wichtig und sinnvoll.

Rising with precision in Istanbul 🇹🇷🏗️A unique observation tower in Istanbul, built using our advanced conical slipform ...
24/09/2026

Rising with precision in Istanbul 🇹🇷🏗️

A unique observation tower in Istanbul, built using our advanced conical slipform system — combining continuous concreting with precise control of a constantly changing geometry.

📐 Tower geometry & key figures:

• Height: 37.350 m

• Square cross-section

• Base dimension: 4.40 × 4.40 m

• Top dimension: 3.30 × 3.30 m

• Wall thickness: 300 mm

• Conicity: 14.7 mm/m

• Slipforming time: just 11 days

The special challenge was the conical geometry. Unlike a conventional vertical slipform, the formwork had to continuously adapt to the changing dimensions of the tower while maintaining the required alignment, wall thickness and concrete quality throughout the entire climb.

The result: 37.350 metres of continuously slipformed concrete in only 11 days.

A great example of how our specialized conical slipform technology can make complex concrete structures efficient, precise and fast.

🏗️ 107 METRES HIGH — COMPLETED IN THE HEART OF OSLO Project completed. Slipform successfully delivered. In just 36 days,...
16/09/2026

🏗️ 107 METRES HIGH — COMPLETED IN THE HEART OF OSLO

Project completed. Slipform successfully delivered.

In just 36 days, the slipform operation brought the core to a total height of 107 metres — making it the first high-rise in Oslo exceeding 100 m since 1990.

Working continuously upwards in the centre of Oslo, our slipform system had to overcome a number of demanding challenges:

🔹 107 m of continuous slipforming in just 36 days
🔹 A 16-ton crane operating within the tight space of our slipform
🔹 Two wall thickness reductions incorporated during the climb
🔹 More than 400 concrete trucks coordinated through the city centre to maintain the continuous concrete supply
🔹 Precise coordination of concrete, reinforcement, formwork, crane operations and logistics throughout the entire climb

From the first lift to the final metre, our advanced slipform Technology enabled a continuous, efficient and precisely controlled construction process.

A big thank you to everyone involved — our dedicated team, project partners, concrete crews, logistics teams and everyone on site who contributed to making this project a success.
Insenti



Another successful silo project completed in Austria! 🇦🇹This project features three reinforced concrete silos arranged i...
16/07/2026

Another successful silo project completed in Austria! 🇦🇹

This project features three reinforced concrete silos arranged in a circular layout:
• 2 silos with an inner diameter of 13.06 m
• 1 silo with an inner diameter of 16.76 m
• All silos standing 18.15 m high with a wall thickness of 22 cm

All three silos were constructed simultaneously using our advanced slipform system, completing the continuous slip in just 4.5 days. This achievement reflects careful planning, precise ex*****on, and outstanding teamwork on site.

Beyond the slipforming works, our scope also included:
✔ Design and production of galvanized silo doors
✔ Roof construction with prefabricated beams
✔ Concreting of the silo ceilings
✔ Installation of wraparound safety railings and access ladders

From engineering and fabrication to ex*****on, this project demonstrates how integrated planning and efficient construction methods deliver exceptional results.

A big thank you to everyone involved for making this project a success!

Le point sur le projet 🚧Notre chantier de deux silos à biomasse, construits côte à côte dans le cadre d'un même projet e...
10/06/2026

Le point sur le projet 🚧

Notre chantier de deux silos à biomasse, construits côte à côte dans le cadre d'un même projet en 🇫🇷, est désormais terminé.

Le recours à notre technologie de pointe en matière de coffrage glissant a permis un processus de construction continu et efficace, avec un haut niveau de précision et une qualité constante du début à la fin. Cette méthode s'est une nouvelle fois révélée être un facteur clé pour respecter à la fois le planning ainsi que les objectifs de performance et de qualité.

Une étape importante pour ce projet et un excellent exemple de ce que les techniques de construction modernes et une équipe dévouée peuvent accomplir conjointement.

Félicitations aux équipes pour leur travail.

Une étape importante franchie avec maîtrise dans le cadre de notre projet d'Unité de Valorisation Énergétique en France ...
20/05/2026

Une étape importante franchie avec maîtrise dans le cadre de notre projet d'Unité de Valorisation Énergétique en France 🇫🇷

La totalité de la structure est désormais achevée, grâce à notre technologie avancée de coffrage glissant, une méthode qui nous a permis d'allier rapidité, précision et qualité à grande échelle.

Chiffres clés de cette phase 1:
• Hauteur : 33,5 m
• Longueur du coffrage glissant : 300 m
• Volume de béton : 1 450 m³
• Surface totale : 6 900 m²
• Épaisseur des murs : min. 200 mm | max. 650 mm

Chiffres clés de cette phase 2:
• Hauteur : 33,5 m
• Longueur du coffrage glissant : 245 m
• Volume de béton : 6 600 m³
• Surface totale : 1 425 m²
• Épaisseur des murs : min. 300 mm | max. 1000 mm

Chiffres clés de cette phase 3:
• Hauteur : 20,7 m
• Longueur du coffrage glissant : 205
• Volume de béton : 852 m³
• Surface totale : 4250 m²
• Épaisseur des murs : min. 400 mm | max. 600 mm

Cette réalisation est le fruit d'un travail d'équipe solide, d'une planification minutieuse et d'une exécution continue sur le chantier.

Un grand merci à IDEX & Spie batignolles pour leur soutien et leur collaboration 🙌

21 Days. 46 Meters. One Continuous Slipform.This sugar silo in Poland was built using slipform construction—delivering s...
29/04/2026

21 Days. 46 Meters. One Continuous Slipform.

This sugar silo in Poland was built using slipform construction—delivering speed, precision, and consistency from start to finish.

📸 Project highlights:
• 262 runmeters of formwork
• 2,218 m³ of concrete
• 12,066 m² of concrete surface
• 46 m total height

During the slip, post-tensioning ducts were installed seamlessly, while the external ring beam completes the structure.

Our advanced slipform made it all possible: a continuous process, no interruptions, and a highly efficient way to build vertically at scale.

LGV Kénitra - Marrakech1 pile sur 18 achevée. Il reste encore du travail…S'élevant progressivement au Maroc, cette pile ...
23/04/2026

LGV Kénitra - Marrakech

1 pile sur 18 achevée. Il reste encore du travail…

S'élevant progressivement au Maroc, cette pile de pont a été construite à l'aide de notre technologie avancée de coffrage glissant — un processus continu qui permet de faire progresser les travaux 24 heures sur 24. Précision, planification et travail d'équipe : chaque mètre compte.

Points forts du projet :
• 2 géométries réalisées simultanément
• Jusqu'à 36 m de hauteur
• 67 mètres linéaires de coffrage
• 18 piles au total

Pas à pas, la structure prend forme. À suivre. 🌍🏗️

Adresse

Itzlinger Hauptstraße 105
Salzburg
5020

Öffnungszeiten

Montag 08:00 - 17:00
Dienstag 08:00 - 17:00
Mittwoch 08:00 - 17:00
Donnerstag 08:00 - 17:00
Freitag 08:00 - 13:00

Telefon

+43 662 420452

Benachrichtigungen

Erfahren Sie als Erste/r von Neuigkeiten und Aktionen: Wir schicken Ihnen eine E-Mail, wenn Gleitbau GmbH etwas veröffentlicht. Ihre E-Mail-Adresse wird für keinen anderen Zweck verwendet, und Sie können sich jederzeit abmelden.

Service Kontaktieren

Nachricht an Gleitbau GmbH senden:

Verknüpfungen

Teilen

Kategorie