A1 Masonry contractors

Website Contact the business

A1 Masonry contractors A1 Masonry contractors are a licensed and insured masonry contractor | family owned & operated

Brick steps should look inviting—and feel solid under every footstep.For Falls Church, Virginia homeowners, loose bricks...
10/16/2026

Brick steps should look inviting—and feel solid under every footstep.

For Falls Church, Virginia homeowners, loose bricks, cracked joints, rocking stone caps, uneven risers, or water collecting on the treads can signal more than a cosmetic issue. A lasting repair begins by checking the supporting base and masonry core, not simply covering damaged areas with fresh mortar.

Proper rebuilding includes a stable footing, sound substrate, full mortar support beneath each unit, straight brick courses, and consistent tread and riser dimensions. Stone tread caps should be securely bedded with a slight outward pitch to shed water. Compatible mortar is carefully packed and tooled around clean brick edges for a neat, durable finish.

A1 Masonry Contractors provides professional brick-step repair and rebuilding with attention to structure, drainage, safe geometry, material compatibility, and clean workmanship.

Have loose, cracked, or uneven front steps? Contact A1 Masonry Contractors for a free on-site estimate:
https://a1masonrywashington.com/

Illustrative image of the brick-step rebuilding process.

A durable concrete walkway starts below the finished surface.For Petworth, Washington, DC homeowners, replacing cracked ...
10/16/2026

A durable concrete walkway starts below the finished surface.

For Petworth, Washington, DC homeowners, replacing cracked or uneven concrete should address more than appearance. Proper excavation and a dense, compacted aggregate base help reduce movement, while correctly supported steel reinforcement strengthens the slab rather than resting unused on the ground.

A1 Masonry Contractors installs residential concrete walkways with careful grading and a positive drainage pitch to help move water away from the home. Concrete is placed inside straight, secure forms, consolidated, leveled, and finished with clean edges. Properly located control and isolation joints help manage normal movement, while a uniform broom finish provides dependable traction.

If your walkway is cracked, sunken, holding water, or ready for replacement, contact A1 Masonry Contractors for a free on-site estimate:
https://a1masonrywashington.com/

Illustrative image of the professional concrete-walkway installation process.

A level paver surface depends on the layers beneath it.For Cleveland Park, Washington, DC homeowners, rocking pavers, lo...
10/15/2026

A level paver surface depends on the layers beneath it.

For Cleveland Park, Washington, DC homeowners, rocking pavers, low spots, widening joints, or water collecting on a walkway can point to movement in the bedding or base—not just a surface problem. A professional repair starts by lifting the affected units, removing loose bedding material, and assessing the supporting layer below.

Where needed, low areas are rebuilt with properly graded aggregate and compacted before a thin, even bedding layer is screeded to the correct drainage plane. The original pavers can then be reset to the intended pattern with consistent joints, alignment, and elevation. Edge restraint, joint sand, and final compaction complete the repair and help keep the surface locked together.

A1 Masonry Contractors provides interlocking-paver walkway and patio repair with careful attention to base preparation, drainage, alignment, and clean workmanship.

Have settled, uneven, or loose pavers? Contact A1 Masonry Contractors for a free on-site estimate:
https://a1masonrywashington.com/

Illustrative image of the professional paver-resetting process.

Good tuckpointing protects the brick as carefully as it replaces the mortar.For Georgetown, Washington, DC homeowners, p...
10/15/2026

Good tuckpointing protects the brick as carefully as it replaces the mortar.

For Georgetown, Washington, DC homeowners, professional mortar-joint restoration begins by removing deteriorated material to a suitable, consistent depth—not covering it with a thin surface layer. A shrouded grinder connected to HEPA dust extraction helps control masonry dust, while careful hand-tool work around corners and brick edges reduces the risk of damage.

After the joints are cleaned and prepared, compatible lime-based mortar is packed and tooled to suit the wall’s joint profile. Mortar strength, color, texture, and curing conditions all matter, especially on older brickwork. A controlled final cleaning removes residue without smearing fresh mortar across the brick faces.

A1 Masonry Contractors provides professional tuckpointing and brick restoration with attention to joint preparation, mortar compatibility, dust control, and clean workmanship.

Seeing recessed, cracked, or missing mortar joints? Contact A1 Masonry Contractors for a free on-site estimate:
https://a1masonrywashington.com/

Illustrative image of the tuckpointing process.

Freshly completed in Bethesda, Maryland: the A1 Masonry Contractors crew has finished a new asphalt driveway installatio...
10/14/2026

Freshly completed in Bethesda, Maryland: the A1 Masonry Contractors crew has finished a new asphalt driveway installation, taking the project from careful preparation to a smooth, professionally compacted surface.

A dependable driveway is built from the ground up. Proper grading and base compaction help provide stable support, while accurate surface elevations and drainage pitch help direct water away from low areas. Clean edges and well-finished transitions at the street, walkways, and garage also matter for appearance and everyday use.

The finished driveway gives the property a clean, refreshed entrance and a durable surface designed for regular vehicle traffic.

Planning a new asphalt driveway or replacing a cracked, uneven, or deteriorated surface in Bethesda? Contact A1 Masonry Contractors for a free on-site estimate:
https://a1masonrywashington.com/

The accompanying image is an illustrative representation of a finished asphalt driveway, not the customer’s property.

A loose flagstone tread is more than a cosmetic issue. Rocking stone, failed joints, uneven riser heights, hollow areas,...
10/14/2026

A loose flagstone tread is more than a cosmetic issue. Rocking stone, failed joints, uneven riser heights, hollow areas, or water collecting on a step can create a trip hazard and allow more moisture into the assembly.

For Potomac, Maryland homeowners, proper flagstone-step restoration begins by carefully lifting the affected stone and removing weak or deteriorated bedding material. A fresh, fully supported mortar bed is prepared so the tread can be reset level from side to side with a slight outward pitch for drainage. Consistent elevations, secure risers, compatible mortar joints, and careful cleaning all contribute to a stable, professional finish.

Full-bed support matters. Isolated mortar spots can leave voids beneath the stone and may contribute to rocking or cracking as the steps are used.

A1 Masonry Contractors restores flagstone steps, walkways, and patios with attention to stone placement, drainage, joint preparation, and clean workmanship.

Noticing loose stone, crumbling joints, or uneven steps? Contact A1 Masonry Contractors for a free on-site estimate:
https://a1masonrywashington.com/

Illustrative image of the flagstone-step restoration process.

A brick walkway can complement the character of a Capitol Hill home while still being built for dependable everyday use....
10/13/2026

A brick walkway can complement the character of a Capitol Hill home while still being built for dependable everyday use.

The workmanship begins below the surface. Proper excavation, a uniformly compacted crushed-stone base, a thin and even bedding layer, secure edge restraints, and a controlled drainage pitch all help reduce movement, low spots, and spreading. Above that base, a precise herringbone layout distributes traffic across interlocking units, while a straight soldier-course border gives the walkway a clean, finished edge.

Accurate string lines, consistent joint spacing, careful cutting, final joint sand, and thorough compaction are the details that turn individual paving bricks into a complete hardscape system.

A1 Masonry Contractors installs and restores brick walkways, steps, patios, and other masonry features with attention to preparation, alignment, drainage, and finish quality.

Planning a new walkway or replacing an uneven surface in Capitol Hill, Washington, DC? Contact A1 Masonry Contractors for a free on-site estimate:
https://a1masonrywashington.com/

Illustrative image of the brick-walkway installation process.

Foundation moisture rarely improves on its own. Damp basement walls, white mineral deposits, peeling finishes, musty odo...
10/13/2026

Foundation moisture rarely improves on its own. Damp basement walls, white mineral deposits, peeling finishes, musty odors, or water near the wall-to-floor joint are all reasons to have the exterior drainage system evaluated.

For Alexandria, Virginia homeowners, effective foundation waterproofing starts with careful preparation. Depending on the property, the work may include exposing the foundation, cleaning and repairing cracks, applying a compatible waterproof coating, installing a protective drainage membrane, placing washed stone and perforated drainpipe, and directing water toward a suitable discharge point. Proper backfilling and final grading also help move surface water away from the home.

A1 Masonry Contractors provides foundation repair, exterior waterproofing, and drainage improvements with attention to preparation, material compatibility, and water management.

Noticing recurring moisture or foundation cracks? Contact A1 Masonry Contractors for a free on-site estimate:
https://a1masonrywashington.com/

Illustrative image of the exterior waterproofing process.

New Asphalt Driveway Installation Underway in Bethesda, MDPreparation is underway today as the A1 Masonry Contractors te...
10/13/2026

New Asphalt Driveway Installation Underway in Bethesda, MD

Preparation is underway today as the A1 Masonry Contractors team gets this Bethesda property ready for a new asphalt driveway. The existing surface has extensive cracking and wear, and our crew is carefully preparing the area for the transformation ahead.

Quality paving starts with proper preparation. The next stages will focus on base preparation, grading for drainage and thorough compaction before the new asphalt is installed. Attention to these details helps support a smooth, durable surface with neatly finished edges.

We look forward to sharing the progress as this driveway takes shape, improving everyday access and the appearance of the property.

Considering an asphalt driveway replacement in Bethesda, Maryland? Contact A1 Masonry Contractors today for a free on-site estimate.

https://share.google/fXTr7DlHle6BYUDUu

The edge of a driveway does more work than it looks. Crumbling shoulders, edge cracks, sinking near the lawn, and water ...
10/12/2026

The edge of a driveway does more work than it looks. Crumbling shoulders, edge cracks, sinking near the lawn, and water washing out the base can allow asphalt damage to spread.

For Fairfax, Virginia homeowners, a durable edge repair starts by cutting back to sound pavement, removing loose material, rebuilding and compacting the aggregate base, and placing fresh hot-mix asphalt at the correct elevation. Proper compaction and a supported shoulder help the repaired edge handle vehicle loads and runoff.

Drainage matters, too. The surface should maintain an appropriate pitch so water does not collect or travel along an unsupported edge.

A1 Masonry Contractors provides asphalt driveway repair and replacement with careful attention to base preparation, grading, compaction, and clean transitions.

Seeing crumbling edges, rutting, or standing water? Contact A1 Masonry Contractors for a free on-site estimate:
https://a1masonrywashington.com/

Illustrative image of the asphalt-repair process.

Address

1775 Eye Street Nw
Washington D.C., DC
20006

Opening Hours

Monday 7am - 7pm
Tuesday 7am - 7pm
Wednesday 7am - 7pm
Thursday 7am - 7pm
Friday 7am - 7pm
Saturday 9am - 3pm

Website

Alerts

Be the first to know and let us send you an email when A1 Masonry contractors posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to A1 Masonry contractors:

Shortcuts

Share

Category