Hashtag Decks, LLC

  • Home
  • Hashtag Decks, LLC

Hashtag Decks, LLC Hashtag Decks, LLC specializes in new and replacement composite decks. Deckorators Certified Pro Elite and Trex Pro Gold installer. Based out of Hooksett, NH

11/06/2026

20 seconds of dry-fitting.
Several hours of planning.

Dialing in the fascia and end-return pieces to hide every exposed deck board end. Clean lines don’t happen by accident.

When the sun is hitting just right 🤤
08/06/2026

When the sun is hitting just right 🤤

Full-scale printed template ➡️ joist layout ➡️ curved rim joist ➡️ final fit.Every joist cut on this project was pulled ...
30/05/2026

Full-scale printed template ➡️ joist layout ➡️ curved rim joist ➡️ final fit.

Every joist cut on this project was pulled directly from a 1:1 template. Once the curve was established, the rim was bent to match and checked against the same pattern used for layout.

It’s a little extra work up front, but accuracy matters when you’re building curves.

29/05/2026

Not many people understand just how hard it is to bend mineral-based composites compared to PVC.

This month I had the opportunity to work with the best of the best and help challenge the idea of what was possible with Deckorators Voyage. What started as a learning trip turned into setting new benchmarks for bending wide-width mineral-based composite boards.

Not many people understand how difficult it is to bend mineral-based composites compared to PVC.

This month I flew to Denver to work with Colorado Board Benders and learn from some of the best in the business. What started as a learning opportunity turned into helping push Deckorators Voyage farther than anyone thought possible.

Grateful for the experience, the knowledge shared, and the chance to be part of something pretty unique. Looking forward to applying what I learned on future projects here in New Hampshire.

A project is only as good as the plan behind it.The clean finished product starts with layout, details, and problem solv...
27/05/2026

A project is only as good as the plan behind it.
The clean finished product starts with layout, details, and problem solving long before install day.

Curved decks are awesome… until it’s time to figure out where the footings go 😅With no straight edges to measure from, t...
17/04/2026

Curved decks are awesome… until it’s time to figure out where the footings go 😅

With no straight edges to measure from, this is where our stakeout equipment comes in—dialing in each helical pile location exactly where it needs to be.

No guessing. No “close enough.” Just clean layout and a solid foundation to build from.

One of the most common mistakes we see with above-ground pools:The pool goes in first… then the deck gets designed aroun...
12/03/2026

One of the most common mistakes we see with above-ground pools:
The pool goes in first… then the deck gets designed around it.
That approach usually creates compromises.
For this project we worked with the homeowners during the planning phase. We mapped the deck footprint and elevations directly on the ground so they could visualize the space and ensure the pool height will align perfectly with the finished deck surface.
Designing the pool and deck together always leads to a better result.

We’re proud to announce that we’ve earned Deckorators Pro Elite status — the highest level within the Deckorators contra...
25/02/2026

We’re proud to announce that we’ve earned Deckorators Pro Elite status — the highest level within the Deckorators contractor program.

Pro Elite recognition is reserved for top-performing builders who consistently deliver high-quality projects using Deckorators products.

It’s an honor to represent this level in New Hampshire.

We had the opportunity to connect with the Deckorators team and celebrate the achievement at the International Builders’ Show 2026 in Orlando — and we’re excited to bring even more innovation to our clients this year.

Thank you to everyone who’s trusted us with their outdoor spaces.

Everyone says, “Just bend PVC first.”We didn’t.We chose  Vista because we trust the product—even though composite isn’t ...
06/02/2026

Everyone says, “Just bend PVC first.”
We didn’t.
We chose Vista because we trust the product—even though composite isn’t the easy route.
Still learning the heat-bending process, but this test landed a 12’ radius.
Documented with video and thermal imaging so we can keep improving.

Winter is our R&D season.While installs pause, we’re in the shop learning, bending, shaping, and refining new techniques...
28/01/2026

Winter is our R&D season.

While installs pause, we’re in the shop learning, bending, shaping, and refining new techniques — from deck bending to curved aluminum rail systems.

Not every builder is willing to slow down and learn something new. We are.

Spring projects are already taking shape, and we’re excited to bring these details into real-world builds.

Straight lines are great — but curves are more fun.
If you’ve got a curvy deck idea, we’d love to hear about it.

Address

9800 International Dr
NH
32819

Website

Alerts

Be the first to know and let us send you an email when Hashtag Decks, LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

  • Want your business to be the top-listed Contractor?

Share