Garrett Fromme

04/30/2026

Are you trying to build a CNC business… or just hoping it works out?

Because those are two very different levels of thinking that will make or break your success!

For me, the real shift to success in IDC Woodcraft didn’t come from the machine. It came from mindset.

Even though my business is a little different from creating and selling projects, the foundation of business success is the same for all businesses, including what you want to build.

And we must build those foundations in how we think first, before success comes.

I’ve seen success in the millions, but I had built my foundations before that success came.

One of those foundation builders is by reading business books. The right books expand your mind and help you see yourself in whole new ways.

Of the many books out there, there are 7 that had the most influence on me, and I want to share them with you.

I just dropped a video that tells you what those books are and why you should read them if you want to get into CNC business.

These 7 books helped shape how I think, make decisions, and grow. And they will help you too.

Here’s the video link →

10 likes, 1 comment. "CNC Business Success Starts Here - 7 Books That Change Everything"

04/28/2026

Do you have a Makita trim router on your CNC?

If you do, you definitely need to watch this video.

Machines like the LongMill, Shapeoko, Millwright, Onefinity, and X-Carve often use the Makita RT0701C Compact Router because they are affordable and easy to integrate into the CNC design.

But there’s something you need to know about these units. These trim routers are not built for the extensive run times projects often require.

Because of that, they can suddenly (and often do) burn out right in the middle of your carve, potentially ruining your project.

Sometimes they run like a champ for years. Other times, they burn out in a few months.

But it is preventable with a simple, and very low cost, preventive maintenance step.

I made a 6-minute video explaining one of the causes of the burnout, and the simple step to keep it from happening.

If you have a Makita on your CNC, definitely watch this video!
Here’s the link →

5 likes, 1 comment. "This Simple Fix Saves Ruined CNC Projects (RT0701C Brush Replacement)"

01/26/2026

A Video For Every Newbie

Are you brand new to CNC routers and feeling like… “I have no idea how this actually works?”

If you’re just starting to get curious about CNC routers — or you’ve watched a few videos and feel more confused than before — I made a video that will completely clear things up for you.

I walk through everything you need to know about CNC routers, how they really work...step by step - in plain language. No hype. No assumptions. Just the core pieces, the workflow, and how everything fits together so it finally makes sense.

If CNC has been on your mind, this is the best place to start.
👉

If you’re brand new to CNC routing (CNC woodworking) and searching “how does a CNC router work?” this beginner CNC router guide walks you through the entire ...

01/16/2026

I had a question the other day, and it’s one I hear all the time from beginners.

“How do I know what collet I have?”
“And how do I know when a collet is going bad?”

Collets don’t get much attention, but they play a huge role in vibration, cut quality, and even broken bits.

I did a video on ER collets, where I show you how to identify your collet size, what the warning signs of a worn collet look like, and why this is one of those basics that can quietly make or break your CNC results.

If you’re new to CNC, or you’ve been chasing issues that don’t seem to make sense—this is worth a quick watch.

👉 Watch the video here:

If you’ve ever asked “Will this collet fit my spindle?” or “Which ER collet do I actually have?”, this video will clear it up fast. In this CNC router tutori...

12/23/2025

If you want to create virtually any 3D model but feel intimidated, well, creating 3D models for your CNC router just got way easier.

Vectric just dropped EasyCreate, a super-easy to use 3D model creating program, and I shot a video to show you how easy it is to use.

In the video, I show you:
✅ how to create 3D relief models with a simple AI text description OR a photo
✅ how the credits work (it’s cheaper than you think)
✅ the exact editing tweaks that make your carves look clean
✅ real carve results on the CNC (including a photo relief)

If you’ve been intimidated by 3D carving… then definitely watch this video! 👇

Creating 3D models for CNC carving doesn’t have to be complicated, intimidating, or reserved for advanced users. In this video, I show you how any CNC router...

12/13/2025

This post is only for people who want successful CNC businesses.

I’m talking about people who actually want their CNC to pay them back for the time, money, and energy they’ve put into it, and that will create excellent income.

Here’s the hard truth most people never hear:
👉 CNC success has very little to do with the machine.
👉 It has almost nothing to do with “finding the perfect product.”
👉 And it has everything to do with how you think, decide, and show up.

If you still see your CNC as a hobby, it will always pay you like one.
If you treat it like a business, it starts behaving like one.

I just released a video breaking down 7 mindset rules that quietly separate CNC hobbyists from CNC business owners — the same rules I used to build IDC Woodcraft into a multi-million-dollar company.

This isn’t hype. Nor is it about shortcuts.

Only 1% who watch this video will actually do what I share…And those are the ones that will see success!

It’s the foundation most people skip… and then wonder why they’re stuck.

If you want a CNC business that actually works, start here 👇
https://youtu.be/ggpdjeYADvA

If this post makes you uncomfortable — that’s okay.
That usually means it’s aimed exactly where it needs to be.

If you’re trying to start a CNC business, grow a CNC side hustle, or finally make money with a CNC router, this video is the foundation most people skip when...

12/06/2025

I didn’t expect this!

I’ve used just about every CNC clamp out there. Big ones. Heavy ones. Expensive ones. “Industry standard” ones.

But now I’m replacing every single one of them with this one tiny clamp.

No joke. It changed how I fixture parts on my CNC, reduced collisions, and simplified my setups more than anything I’ve used before.
I was super-skeptical until I tested it. That’s when I said, “This is EXACTLY what I’ve been looking for!”

If you run a CNC and fight clamping headaches, you need to see why I’m sold on this.

👇 Watch the video here 👇
https://youtu.be/KYX3mz_j994

Garrett

PS — This is the EdgeHugger™, and once you see what it does, your clamps might start feeling nervous 😄

All the CNC router hold-down clamps I’ve used—cam clamps, toe clamps, and big metal T-track clamps—are now obsolete. In this video I show you why I’m replaci...

12/04/2025

🔥 Tired of getting Ugly Tool Marks on Your CNC Projects?
If you’ve ever cut a beautiful sign… only to stain it and suddenly EVERY swirl line, every groove, every ghost mark shows up like a big neon mistake — you’re not alone.

The good news?

There’s a simple toolpath trick that fixes it forever. No crazy settings, no guessing, no sanding your life away.

In this video, I’ll show you:
✔️ Why your pockets look rough or “crappy”
✔️ The REAL problem with offset toolpaths
✔️ The double-raster technique that gives glass-smooth pockets
✔️ How to make raised letters that stay clean even after stain

If you want CNC pockets that look pro — every single time — this will change how you carve.

👉 Watch the video here: https://youtu.be/BMBIws64lZM

Let me know if this helps you… or if you’ve been fighting these marks for years. I love hearing your wins!

Have you ever finished a CNC sign, put stain on it, and suddenly every ugly CNC tool mark and swirl line around your letters shows up? In this video, I’ll sh...

11/26/2025

Starting — or even thinking about starting — a CNC business?
I just released a new video that I honestly wish I had 5 years ago…because what people DON’T tell you about running a CNC business can break your heart, drain your passion, and make you question whether it’s worth it.

In this video, I cover 3 hard truths no one warns you about — things every CNC creator needs to hear before turning their hobby into a business.

But I also share 3 beautiful truths — the parts that make the journey worth it, the reasons we push through, and why CNC can become one of the most meaningful paths of your life.

If you’ve ever:
• Thought about selling your CNC projects
• Been burned or undervalued by customers
• Lost creativity while trying to “scale”
• Helped someone grow only to get hurt later
• Wondered if your CNC passion could pay the bills…
👉 This video is for you.

I made it to protect the next CNC brother or sister from the blind spots that hit me the hardest — and to remind you how powerful and rewarding CNC can be when you stay true to your values.

🎥 Watch here: https://youtu.be/laFBQ2uaT_Q

If something in that video hits your heart… drop a comment under it so others in our CNC community can learn from your experience too.

We’re in this together.
💙 Garrett – IDC Woodcraft

Thinking about starting a CNC business… or already selling CNC projects and feeling a little beat up by it? In this video I share 3 hard truths and 3 beautif...

11/22/2025

A CNC Update you don't want to miss!

This video includes:
🔹 Black Friday deals already live at IDC Woodcraft
🔹 A brand-new FREE 3D STL (perfect first 3D carving project)
🔹 Tramming bars arriving in December
🔹 A sneak peek at a revolutionary work holding clamp 👀
🔹 And an update on our Veterans donation with the Purple Heart Project

This is one of those “don’t miss it” videos if you love CNC projects, new tools, and the community behind all of it.

If you want FIRST DIBS on the new EdgeHugger™ clamps (only 1,000 sets will be available), join the waiting list below:
👉 https://garrett-fromme.aweb.page/exclusive-edgehugger-clamp

Garrett