Rolling Up Overhead Doors LLC

Rolling Up Overhead Doors LLC Garage Door Repair Service & Install. BBB Accredited.

When was the last time your garage door was serviced?   IF IT'S BEEN OVER 6 MONTHS, CALL NOW!● You should have your gara...
08/22/2026

When was the last time your garage door was serviced?

IF IT'S BEEN OVER 6 MONTHS, CALL NOW!

● You should have your garage door overlooked and serviced AT MINIMUM TWICE A YEAR.

● Servicing includes a complete overview of your garage door and hardware. Lubricating your garage door rollers, bearing plates, springs etc. Adjusting tension on springs if needed. YOUR DOOR IS METAL AGAINST METAL. KEEPING THE DOOR LUBRICATED IS ESSENTIAL IN MAXIMIZING THE LIFE SPAN.

● Servicing your door is HIGHLY IMPORTANT to prevent future expensive repairs! Operating your door with improperly balanced and/or broken springs can cause damage to your motor as well as other components.

DON'T WAIT FOR A SERVICE FEE TO TURN INTO A $1,000+ REPAIR. CONTACT US TODAY!!

919-741-3373

"Roll with the best, we handle the rest"

Responded to a homeowners broken spring in Raleigh, NC. The homeowner had 2 single car garage doors. They were installed...
08/05/2026

Responded to a homeowners broken spring in Raleigh, NC.

The homeowner had 2 single car garage doors. They were installed in 2013. Homeowner mentioned the doors had not been serviced in years.

We replaced the broken spring and had their door back operational in no time!

We serviced both doors and also replaced their plastic rollers on both doors with our nylon coated rollers.

"Roll with the best, we handle the rest!"

919-741-3373

Replaced a homeowners garage door in Chapel Hill, NC! Another wood door replaced!The garage was slightly clustered as th...
07/24/2026

Replaced a homeowners garage door in Chapel Hill, NC!

Another wood door replaced!

The garage was slightly clustered as the homeowners were on vacation.

We made it work!

●Installed a 16x7 Flush panel design garage door. Steelback insulated, with custom glass going down the side.

●Liftmaster Belt Drive motor with built-in security camera and battery backup. Equipped with MyQ technology!

"ROLL WITH THE BEST, WE HANDLE THE REST!"

919-741-3373

Replaced a homeowners garage door motor in Lake Royale, NC Upon arriving we noticed both sensor lights were out. The hom...
07/22/2026

Replaced a homeowners garage door motor in Lake Royale, NC

Upon arriving we noticed both sensor lights were out.

The homeowner mentioned a heavy storm a few days prior.

After verifying the wiring and power to the motor, it was determined the opener had a bad circuit board. Which was believed to be caused by a power surge.

● Replaced the motor with our 6580 LiftMaster.
Built in battery backup and security camera.
Equipped with MyQ technology!

● Serviced the garage door and replaced the
plastic rollers with our nylon rollers.

EXACT WORDS

"It's literally never been that quiet!"

"Roll with the best, we handle the rest!"

CALL US TODAY

919-741-3373

Installed a 10x9 garage door @ an auto body shop in Franklinton, NC. Raised panel design, non insulated, manually operat...
07/20/2026

Installed a 10x9 garage door @ an auto body shop in Franklinton, NC.

Raised panel design, non insulated, manually operated.

Call us to get your new garage door today!

"Roll with the best, we handle the rest!"

919-741-3373

Replaced (2) 25 year old wood doors in Raleigh, NC for a renovation project! The bottom panels were beginning to rot awa...
07/10/2026

Replaced (2) 25 year old wood doors in Raleigh, NC for a renovation project!

The bottom panels were beginning to rot away.

Replaced with (2) 9x7's, non-insulated, raised panel design garage doors. Reconnected to the existing motors.

Need your old garage door replaced?

Call us today @ 919-741-3373

Converted a Wayne Dalton Spring system over to the updated Torsion spring system for a homeowner in Rolesville, NC.I kno...
07/08/2026

Converted a Wayne Dalton Spring system over to the updated Torsion spring system for a homeowner in Rolesville, NC.

I know what you're thinking. WHAT'S THE DIFFERENCE?!?

The homeowner reached out and stated the garage door would go up about a foot and then stop. Upon evaluation it was determined the garage door had a broken spring.

●When a spring breaks in the Wayne Dalton torquemaster assembly, the springs are concealed inside of the shaft/tube.

● This Wayne Dalton assembly requires specific parts supplied directly from Wayne Dalton and can take days if not up to a month-2 to get hardware/material. Nobody wants there garage door inoperable for that long!

●Torsion springs are made from thicker/higher grade steel which typically last 10-15,000 cycles whereas the Wayne Dalton assembly operates with much thinner gauge springs. In return, break quicker over a period of time.

● This is why we ideally transition the system over to a Torsion Spring assembly.

●LAST BUT NOT LEAST! When a spring and/or hardware breaks on the Torsion spring assembly, you then have the option to repair just the spring and/or hardware versus replacing the entire system.

CALL US TODAY TO GET YOUR WAYNE DALTON SYSTEM CONVERTED OVER TO THE TORSION SPRING SYSTEM!

919-741-3373

We responded this morning to a Post Office door in Carrboro, NC.The door was stuck about halfway. Reset the motor limits...
06/27/2026

We responded this morning to a Post Office door in Carrboro, NC.

The door was stuck about halfway.

Reset the motor limits, made a few adjustments and verified there was nothing causing the door to bind up.

In and out before they opened up this morning!

"Roll with the best, we handle the rest!"

A homeowner in Hope Mills, NC reached out and mentioned their garage door would go up about a foot and then stop. They s...
06/26/2026

A homeowner in Hope Mills, NC reached out and mentioned their garage door would go up about a foot and then stop.

They sent over pictures and we immediately noticed they had a broken spring.

Your garage door springs are rated on cycles. Up and down is considered one cycle. The standard residential spring is rated for around 10,000 cycles.

When one spring breaks, typically the other is not far behind.

We replaced both springs, replaced all the rollers, and serviced the door.

We advise getting your door serviced twice a year. Your garage door is metal against metal. Lubricating and making sure your door is properly balanced is important for smooth operation and can prevent future costly repairs.

Give us a call to get your garage door serviced now!

919-741-3373

Address

Louisburg, NC
27549

Opening Hours

Monday 7am - 6pm
Tuesday 7am - 6pm
Wednesday 7am - 6pm
Thursday 7am - 6pm
Friday 7am - 6pm
Saturday 7am - 6pm

Telephone

+19197413373

Website

Alerts

Be the first to know and let us send you an email when Rolling Up Overhead Doors LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Rolling Up Overhead Doors LLC:

Shortcuts

Share